TI Automotive: Fuel Pump Modules

Whether you prowl the streets or hit the track, run boosted or all-motor, TI Automotive fuel pumps and modules deliver maximum fuel flow throughout a wide pressure range to support major horsepower. With unrivaled performance and unmatched durability, it’s no wonder why TI Automotive pumps already fuel many of the world’s most iconic high-performance vehicles.

TI Automotive fuel pump modules deliver the superior performance you need. The OE-designed technology combines a high-performance fuel pump with filtration, level-sensing, and storage as an assembly similar to a traditional replacement module. These modules are available as a complete product range to cover a wide variety of vehicles, from sports cars to pickup trucks.

  • Complete drop-in fuel module assemblies
  • Integrated fuel storage and filtration technology
  • Built-in, precalibrated fuel-level sensors
  • Plug-and-play wiring harnesses

    TI Automotive Fuel Module
    TI Automotive Fuel Module

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

RaceQuip: PRO15 Snell SA2015 Full-Face Helmet

The RaceQuip PRO15 is a Snell SA-2015–rated full-face auto racing helmet that combines contemporary styling with modern production techniques. The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6-threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion-free 3 mm polycarbonate face shield features an aluminum pivot kit, hand-ratcheted TearOff posts, and a silicone eye port gasket to seal out dust and dirt. A wide eye port provides good peripheral vision and allows the use of personal eyewear. The SA rating means that the interior, paint, and Kevlar chin strap are fire retardant, so the RaceQuip PRO15 helmet is suitable for use in all forms of motorsports. The comfort-fit blended Nomex® interior and exhaust vents on the top and back of the shell help keep your scalp cool. Available in Gloss White, Gloss Black, Gloss Steel, and Flat Black in sizes XXS – 3XL.

RaceQuip PRO15
RaceQuip PRO15

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

DEI: EXO Series Exhaust and Pipe Wrap

The Design Engineering, Inc. EXO Series™ exhaust wrap is designed for use in extreme environments. Traditional exhaust wraps have not been able to withstand the dirt and water that can accompany off-road, dirt track, desert, and other forms of intense driving. The EXO Series features a dual-layer design that incorporates a combination of high-temperature glass covered with a 304-grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact shielding. What’s more, DEI’s unique Air Gap Technology keeps the glass fiber wrap from directly contacting the hot surface by way of an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe, or exhaust system; this size also makes it perfect for high-impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped, keeping the wrap tight and making installation easy. Delivering outstanding looks and rugged performance over the long haul, this product is available in Black or Tan in either 1.5” x 10’ or 1.5” x 20’ rolls.

EXO Series Exhaust Wrap
EXO Series Exhaust Wrap

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

ST Suspensions (13230065): ST X Coilovers for 2015+ Ford Mustang GT

ST Suspensions 13230065 ST X Coilovers for 2015+ Ford Mustang GTs are designed in conjunction with KW Germany. ST X coilovers deliver sporty handling by reducing body roll during compression as well as improving agility when driving fast. Each ST X coilover includes a low-friction and pressure-resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensure the twin-tube dampers remain free of dirt particles in all weather conditions.

ST height-adjustable coilover kits are precision engineered and road tested to the highest standards of the German TÜV. This product’s threaded shock bodies allow you to customize your vehicle’s ride height to maximum without compromising safety, functionality, or superior driving performance.

  • Individual lowering within the TÜV-tested adjustment range
  • Front and rear axle thread adjustment (when possible)
  • Galvanized coilover struts with additional coating for optimized corrosion protection
  • Complete solution with adjustable spring plate, race spring system, and bumpers with dust protection
  • Powerful twin-tube dampers with high-quality components for maximum longevity

    ST X Coilover
    ST X Coilover

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Flowmaster (817749): American Thunder Axle-Back Kit for 2015-2016 Ford Mustang

Flowmaster’s American Thunder axle-back exhaust system for the 2015-2016 Ford Mustang GT is perfect for the person looking for an aggressive sound level both inside and outside of the car, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out Rear), emissions-legal system for cars with a 5.0L engine features a pair of Super 44 Series mufflers and dual mandrel-bent 3″ tailpipes for maximum performance. The system is built out of 409S stainless steel and uses 4″ stainless steel tips. The exhaust system is manufactured in the USA and is covered by Flowmaster’s Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: This system fits hardtops and convertibles.

Features:

  • Stainless steel construction
  • Dyno tuned for maximum performance
  • Patented Delta Flow Technology

    Flowmaster 817749
    Flowmaster 817749

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

MSD (2700): Atomic AirForce Manifold for 2014-2015 Chevrolet Corvette LT1

If you’re looking for bolt-on power and torque for your new LT1, the new Atomic AirForce intake manifold from MSD is the answer! This all-new polymer intake will increase the performance of stock and modified versions of the Direct-Injected LT1 engine.

MSD initiated the clean-sheet AirForce design by addressing the performance shortcomings of the OEM manifold. Through the use of Computational Fluid Dynamic modeling, MSD was able to optimize the plenum volume and improve runner layout. Unique bell-mouthed runner openings, optimum runner length, and minimal shrouding ensure maximum airflow and cylinder-to-cylinder balance.

The LT1 intake is a two-piece molded design that allows for porting and runner modification, while the polymer construction minimizes weight and heat absorption. MSD also made it easy to accommodate power adders by equipping the AirForce LT1 manifold with integral port fuel injection bosses at the base of each runner.

The AirForce LT1 intake accepts an OEM electronic throttle body as well as aftermarket electronic throttles up to 105 mm.

MSD Atomic 2700
MSD Atomic 2700

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Superchips: Flashpaq F5

The all-new Flashpaq F5 performance tuner from Superchips uses an updated, easy-to-use graphic interface; a high-resolution color screen; scan features; and tuning levels to achieve more power per dollar than any other tuner on the market. Available for Ford (PN 1845), Chevy/GMC (PN 2845), Dodge/Ram/Chrysler (PN 3845), California Edition (PN 4845), and Jeep (1998-2014 JK: PN 3874 & 2015 JK: PN 3876).

Features:

  • High-definition, 2.8″ color screen
  • Redesigned graphic interface for improved user experience
  • Increased memory with faster processor for improved tuning and updating
  • Performance tuning for Economy, Towing, Daily Driving, and Extreme Tuning
  • Eliminates downshifting when climbing hills
  • Speedometer correction for changes in tire size and gear ratio
  • Adjusts speed and rev limiters
  • Tuning for shift points, shift firmness, and TQ management
  • Internet updatable with all-new software via USB
  • Active fuel-management control
  • Vehicle parameter-monitoring capabilities
  • Reads and clears diagnostic trouble codes
  • Compatible with other performance upgrades
  • 2-year powertrain warranty
    Superchips Flashpaq F5
    Superchips Flashpaq F5

    Superchips Flashpaq F5 Jeep
    Superchips Flashpaq F5 Jeep

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

BBK (1818): 2015-2016 Mustang GT 5.0 Resonator Delete X-Pipe

Get rid of your restrictive factory resonator box, free up additional horsepower, and add a more aggressive sound to your 2015 Ford Mustang 5.0 GT with a BBK Performance high-flow, CNC-mandrel bent resonator delete X-pipe.

Features:

  • CNC-mandrel bent tubing significantly improves exhaust flow for maximum horsepower and torque
  • Kit includes detailed instructions and all required hardware and clamps to complete installation
  • Special reducers allow installation on the factory exhaust, where applicable–just cut and clamp
  • Designed to increase performance and add a more aggressive sound over stock

    BBK 1818
    BBK 1818

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

K&N (71-2545): Blackhawk Induction Air Intake System

The K&N 71-2545 Blackhawk Induction Air Intake System for the 2011-2016 Challenger/Charger/300 6.4L is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low-restriction system allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This product comes with black components including a K&N high-flow air filter and heat shield. The tube features an attractive, textured, black powder-coated finish and an engraved K&N plate welded on–creating a clean, high-performance look under the hood. The intake tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone-shaped air filter is made from an oil-free synthetic filter medium that can be used for up to 100,000 miles before cleaning is needed, depending on driving conditions. This air intake is relatively easy to install, usually only 90 minutes or less using existing factory mounting points and commonly available tools.

Note: Cannot be sold in California and not legal for use in California or other states adopting California emission standards.

K&N 71-2545
K&N 71-2545

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.