Mr. Gasket: AN Swivel Hose Ends and Hose

John Arnaud Leave a comment
Use This Post Clip for Email

Part of the new AN Plumbing Program by Mr. Gasket, these AN swivel hose ends and hose offer a traditional race car look (red/blue) or a more modern appearance (black). Starting with a satin anodized finish that looks great even with paired with other plumbing brands, these value-priced hose ends have a swivel that allows hose adjustment even after tightening. They are available in AN sizes from -6 to -12. The AN hose is available with a stainless steel or black nylon outer braid.

Features

  • Part of the Mr. Gasket Budget Plumbing Program.
  • Hose end swivels allow adjustment after installation.
  • Hose ends made from 6061 aluminum.
  • AN sizes: -6 to -12 AN.
  • Available in classic Red/Blue or Black Anodized.
  • Classic look matches most other plumbing brands.
  • Satin anodized finish without logos.
  • Stainless steel or nylon outer braiding on the hose.

Mr Gasket AN Swiveling Hose Ends and Hose

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (CT603): CarTech’s “GTO Data and ID Guide: 1964-1974”

John Arnaud Leave a comment
Use This Post Clip for Email

Presented in compact (5” x 8”) paperback form, allowing you to easily take it with you to shows for reference, the new GTO Data and ID Guide: 1964–1974 from CarTech dissects the Pontiac GTO and presents critical information such as engine/transmission codes, rear-axle identification, exterior/interior colors, options, production numbers, and VIN decoding.

Author Peter Sessler’s effort provides incredible context for GTO lovers wanting to restore their old Goat to its original glory.

Pages: 192
Format: Paperback
Size: 5” x 8”
Illustrations: 110 color photos

CarTech GTO Data and ID Guide 1964-1974

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock SBC and BBC Engine Blocks

Edelbrock: Engine Blocks for Small and Big Block Chevy

John Arnaud Leave a comment
Use This Post Clip for Email

Fabricated in America from quality cast iron, the new Edelbrock engine blocks are built to last—and are the same ones the company uses to build its own crate engines.

Available for both small-block and big-block applications, these Edelbrock engine blocks are the perfect starting point for any Chevy high-performance engine.

Features

  • Precision cast and machined in America.
  • For big-block and small-block Chevy applications.
  • Quality cast iron to Edelbrock

Edelbrock SBC and BBC Engine Blocks

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AEM (25-305BK): High-Capacity Universal Adjustable Fuel Pressure Regulator

John Arnaud Leave a comment
Use This Post Clip for Email

Compatible with alcohol/race fuels and adjustable from 40–130 PSI, the 25-305BK from AEM is the ideal choice for racers who need reliable fuel pressure in high-boost vehicles and race cars that require a large volume of fuel delivery.

An easy-to-adjust set screw easily endures repeated adjustments, while one large return orifice is up to the task of handling high–rate flow pumps. This universal fuel pressure regulator additionally has a 1:1 rising pressure rate for boosted applications and is tapped to accept 9/16”-18 O-rings for inlet and return. AEM included a 1/8 NPT port for compatibility with a pressure sensor pick-up or fuel pressure gauge.

Features

  • Adapts to virtually any EFI-equipped vehicle.
  • Alcohol and race fuel compatible.
  • Longer spring for a wider range of adjustment (40–130 PSI).
  • Single large return orifice accommodates high flow–rate pumps.
  • Boost-dependent rising fuel pressure rate (1:1).
  • Three 9/16”-18 ORB O-ring style inlet ports (2 inlet, 1 return).
  • Easy-to-use adjustment screw.

AEM High Flow Universal Fuel Pressure Regulator

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RaceQuip (828008): Quick-Release Triangle Roll Cage Net

John Arnaud Leave a comment
Use This Post Clip for Email

This 828008 quick-release triangle roll cage net from RaceQuip is a unique product. It was originally designed for use as a roll cage net on a sprint car or midget chassis. On full-size race cars, however, it can be mounted as a right-side helmet support net, with an extra-long front mount strap that uses a heavy-duty ratchet to maintain tension. A stainless steel halyard snap quickly releases the net for an expedited exit.

Constructed of heavy-duty 1” polypropylene webbing and nylon thread for maximum durability. Jig-built construction techniques ensure precise size, shape, and fit. SFI 37.1 certified and available in Black.

Features

  • SFI 37.1 rated (tags affixed).
  • Premium 1” polypropylene webbing.
  • Side net prevents head movement.
  • 2” ratchet to maintain tension.
  • Quick-release stainless steel halyard snap.
  • Jig built for consistency.
  • 24” x 46” (mount strap adds 32” in width).

RaceQuip Quick Release Triangle Roll Cage Net 828008

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NOS (02125NOS): Complete Nitrous Kit for ’11-’17 Ford Mustang with Coyote Engine

John Arnaud Leave a comment
Use This Post Clip for Email

This complete wet nitrous kit from NOS for 2011–2017 Ford Mustang with Coyote engine includes NOS’s mini two-stage progressive controller for exceptionally smooth power delivery. The billet 6061-T6 aluminum plate is anodized black for great looks under the hood. NOS has included a stainless steel solenoid bracket with custom bent hard lines for that professionally installed look.

Features

  • For 2011–2017 Ford Mustang with Coyote V8 engine.
  • Fits both standard and 302 Boss manifolds.
  • Provides exceptionally smooth power delivery.
  • Black-anodized 1/2” 6061-T6 aluminum.
  • Single 1/2” plate between the throttle body and manifold.
  • Supports up to 250 rear wheel horsepower (RWHP).
  • Includes jetting for 75, 100, 125, and 150 RWHP.
  • Includes a 10 lb. “NOS Blue” nitrous bottle with brackets.
  • Includes a NOS mini 2-stage progressive controller (15974NOS).
  • Also available as a “plate only” kit (13125NOS).

NOS Complete Nitrous Kit for Ford Coyote 02125nos

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: PROFORM 50 AMP Mini Alternator

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the 50 AMP Mini Alternator from PROFORM on a modified street dirt car.

Parts used in this video:

50 AMP Mini Alternator, black crinkle finish (66432)

Want to check out more about PROFORM?
https://partspro.com/manufacturer/proform

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Redhorse Performance: 205 Series Racing Hose

John Arnaud Leave a comment
Use This Post Clip for Email

205 Series hose from Redhorse Performance is the company’s top-of-the-line double-braided steel hose, with a unique dual-layer inner tube consisting of epichlorohydrin (ECO) and fluoroelastomer (FKM) for unrivaled fuel compatibility—whether you’re using e85, methanol, or pump fuel.

Available in precut 3’, 6’, 10’, 20’, and 50’ lengths (50’ in -04 through -10 sizes only).

Note: Not for use on high-pressure power steering lines or hydraulic applications. NHRA accepted.

Features

  • Premium double-braided steel hose.
  • Compatible with e85, methanol, or regular fuel from the pump.
  • Unique dual-layer inner tube.
  • NHRA accepted.
  • Available in precut 3’, 6’, 10’, 20’, and 50’ lengths.

Redhorse Performance 205 Series Hose

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M (81059): Stealth Magnum Grip Pro Stick Gated Automatic Shifter with Carbon Fiber Finish

John Arnaud Leave a comment
Use This Post Clip for Email

B&M has updated its Stealth Magnum Grip Pro Stick to include an aluminum cover with carbon fiber finish. Features everything its predecessor is known for, including precise gate action; reverse lockout that meets NHRA/IHRA requirements; and optional gate plates for 2-, 3-, or 4-speed transmissions (forward or reverse patterns). The 81059 comes with cover, 5’ Super Duty race cable, and hardware.

Features

  • Consistent and precise gate action.
  • Lightweight cover goes on and off quickly and easily.
  • Reverse lockout feature meets NHRA/IHRA requirements.
  • Optional gate plates for 2-, 3-, or 4-speed transmissions (forward or reverse patterns).

B&M Stealth Magnum Grip Pro Stick Automatic Shifter with Carbon Fiber Finish 81059

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51605FLT): 2.25” SS Axle-Back Exhaust for ’16-’18 Camaro 2.0/3.6L

John Arnaud Leave a comment
Use This Post Clip for Email

The 51605FLT axle-back exhaust system from Flowtech is engineered to provide premium fitment and maximum performance for your 2016–2018 Chevy Camaro with 2.0L or 3.6L engine. The system is anchored by 2.25” polished stainless steel, with matching high-flow, straight-through mufflers that offer aggressive sound without the unwanted drone. Not for use with applications that have dual-mode exhaust (NPP).

Features

  • 25″ diameter polished stainless steel for maximum strength and durability.
  • Matching high-flow, straight-through mufflers for aggressive sound without the drone.
  • 4” polished 304 stainless steel dual-wall exhaust tips.
  • Quality welds for strength, longevity, and good looks.
  • Tube geometry designed for hassle-free installation.
  • Uses OEM mounting points for factory-like fitment.
  • For applications without dual mode exhaust (NPP).

Flowmaster 2.25 SS Axle Back Exhaust for 16-18 Camaro 2.0 or 3.6L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.