NOS: 4-Bolt Throttle Body Nitrous Plate Kits for GM LS Engines

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re running a GM LS-based engine and would like to add up to 250 horsepower, complete nitrous kits from NOS inject a little more power into that stock engine or a lot more power into that custom-built hot rod. Kits include jetting for 100, 125, and 150 additional horsepower, while the plates themselves can flow enough nitrous for 250 big HP.

Available for 4-bolt drive-by-wire or cable-operated throttle bodies in 90mm and 105mm plate sizes, these are “wet” plates. The additional fuel is added though the nitrous system, so there are no requirements for an injector upgrade (but you should always make sure that your fuel delivery system is adequate to support the expected power levels).

Features

  • Add up to 250 HP to GM LS engines.
  • Available for 4-bolt drive-by-wire or cable-operated throttle bodies (90 & 105mm plates).

NOS Four-Bolt Throttle Body Nitrous Plates for GM LS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M (81078): Stealth Side Plate with 12V Button for Right-Hand Magnum Grip Shifter

John Arnaud Leave a comment
Use This Post Clip for Email

Designed to fit right-hand Magnum Grip shifters, the 81078 Stealth side plate with 12-volt button from B&M can activate your two-step ignition, trans-brake, or nitrous system. This product boasts a black anodized finish, 6061 aluminum body, and a wire that is completely hidden in a machined channel on the stick.

Features

  • Fits B&M right-hand Magnum Grip shifters.
  • Button activates two-step ignition, trans-brake, or nitrous system.
  • Wire hidden in machined channel.
  • Works with 12V systems.
  • Black anodized finish.

B&M Stealth Side Plate with 12V Button for RH Magnum Grip Shifter 81078

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Cloyes: Hex-A-Just True Roller Sets

John Arnaud Leave a comment
Use This Post Clip for Email

The Hex-A-Just True Roller Set, an industry breakthrough when Cloyes introduced it in 1992, still has yet to be equaled in the industry. It is infinitely adjustable to +/- 6 degrees, with no fumbling with offset bushings or machining required: just dial in your cam timing with a wrench and tighten the bolts to lock the cam position. That’s it! You’ll enjoy accurate timing and save many hours of set-up time with the Hex-A-Just.

Cloyes hand matches every Hex-A-Just set to qualify center distance and control run-out.

Quick tech tip: When making cam timing adjustments, first loosen the cam bolts then release the camshaft load.

Features

  • Patented +/- 6 degree adjustments.
  • Induction heat-treated, billet steel sprockets.
  • 3 keyway billet steel crank sprocket.
  • Premium True roller chain with .250” diameter rollers.
  • Hand matched to qualify center distance and control run-out.
  • Some sets available with Z-Chain.
  • All Chevy and BB Chrysler sets include captured thrust bearing.

Cloyes Hex-A-Just True Roller Set 9-3100A

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Parts Pro™ Vendor Showcase presents: Edelbrock

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Parts Pro™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, MIke Kovacs goes over what’s new for 2016.

Want to know more about Edelbrock? Click here:
https://partspro.com/manufacturer/edelbrock

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Parts Pro™ Vendor Showcase presents: Hypertech

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Parts Pro™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Chris Crecelius goes over what’s new for 2016.

Want to know more about Hypertech? Click here:
https://partspro.com/manufacturer/hypertech

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Parts Pro™ Vendor Showcase presents: KW Automotive

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Parts Pro™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Bob Schuetz goes over what’s new for 2016.

Want to know more about KW Automotive? Click here:
https://partspro.com/manufacturer/kw-suspensions

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Cometic Gasket (C5974): Valve Cover Gasket for Ford Small Block V8

John Arnaud Leave a comment
Use This Post Clip for Email

Manufactured from soft durometer rubber wrapped around a steel torque limiting frame, the C5974 valve cover gasket for Ford Small Block V8 from Cometic Gasket provides unparalleled sealing and extended reusability, surpassing the quality and ability of a typical cork or paper gasket. The rubber and steel combination is built to withstand blowing out, overtightening, and extreme vacuum at an affordable price.

Features

  • For Ford Small Block V8s
  • Steel torque limiting frame wrapped with durometer rubber.
  • Excellent sealing and reusability behavior.
  • Built to withstand blowing out, overtightening, and severe vacuum.

Cometic Gasket Valve Cover Gasket for Ford Small Block V8

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD (8362CT): “Stock Appearing” Circle Track HEI Distributor

John Arnaud Leave a comment
Use This Post Clip for Email

New as of March is the 8362CT Circle Track HEI Distributor from MSD Performance, which provides brute strength and precision timing from idle to maximum RPM. It features a bulletproof ignition module that fires a high-output coil in the cap while a specially designed QPQ-coated chrome-moly advance cam and weight set ride on TIG-welded weight-plate pins and distributor shaft. Also QPQ coated, the steel gear is built to run race after race without fatigue.

MSD created this piece to be “stock appearing” in order to meet sanctioning-body HEI distributor rules.

Features

  • “Stock appearing” to meet sanctioning body HEI distributor rules.
  • TIG-welded shaft and weight plate pins for strength and durability.
  • Easily lock-out timing advance with supplied timing lock-out cam.
  • Reliable ignition module.
  • High-output ignition coil for peak spark energy at any RPM.
  • High-quality, QPQ-coated distributor gear, advance cam, and weights.
  • Pairs perfectly with MSD 8727CT HEI Circle Track RPM Control (sold separately).

MSD Performance Stock Appearing Circle Track HEI Distributor 8362CT

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: New-Look Black-Coated Flathead Components for Ford

John Arnaud Leave a comment
Use This Post Clip for Email

Edelbrock’s iconic “Slingshot” intake manifolds—dual, triple, and even single-quad—are now available with a black-coated finish to match early- or late-model Edelbrock cylinder heads. The Edelbrock script and block letter logo are highlighted for that extra detail. All Edelbrock flathead components are cast and machined in America for the best quality—just like Vic Edelbrock Sr. did in the 1930s.

In addition, don’t miss the many related components that Edelbrock offers for the Ford flathead market, including 94 carburetors (primary and secondary), 94 carburetor heat insulators and chrome air cleaners, carburetor linkage kits (dual and triple deuce), fuel distribution blocks (dual, triple, and quad), low fuel pressure regulators, generator brackets (straight and offset, early and late model), cylinder head stud kits (early and late model), and individual and complete head gasket sets.

Features

  • New black powder-coated finish.
  • Highlighted Edelbrock script and block letter logo.
  • Cast and machined in the USA.

Edelbrock Black Powder-Coated Flathead Components for Ford

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR1590): Hi-Rev Performance Power Steering Pump for GM Type II

John Arnaud Leave a comment
Use This Post Clip for Email

Flaming River’s hi-rev performance power steering pump is a direct, bolt-in replacement suitable for all vehicles using GM Type II power steering systems. FR1590 is engineered and assembled by KRC Power Steering to the same standards as KRC’s racing pumps. Features include adjustable-flow control fitting technology, which allows the user to dial in the feel of the vehicle’s steering in a matter of minutes.

Available finishes: Satin or Polished

Features

  • 9 changeable flow-control fittings.
  • 22 GPM standard fluid-flow rate (1.18 GPM to 2.92 GPM optional).
  • 1,600 PSI pressure relief valve.
  • Press-on pulley shaft for direct GM Type II replacement (pulleys sold separately).
  • Less cavitation and more durable than standard GM Type II pumps.
  • Hard-coated rear cover for added longevity.
  • Made in the USA.
  • Two finishes: Satin or Polished
  • Warranty: 1 year

Flaming River Hi-Rev Performance Power Steering Pump for GM Type II

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.