Month: April 2017

Hedman Hedders (68743): Black Maxx Ceramic-Coated Cast-Steel Exhaust Manifold for LS Swaps

David Ayers Leave a comment
Use This Post Clip for Email

These low-profile, cast-steel manifolds are perfect for 64-67 GM A-Body and 67-81 GM F-Body LS engine swap projects. Hedman Hedders designed them to offer excellent clearance and durability and to dramatically reduce radiant heat to keep engine bay temps low. The 68743 features Hedman Hedders’ Black Maxx ceramic coating, but three other finishes are available:

  • Raw Steel (68740)
  • HTC Polished Silver Ceramic (68746)
  • Matte Silver Ceramic (68748)

Note: NOT LEGAL FOR STREET USE. Not applicable or intended for street or highway use on 1973-and-later vehicles and may never be used upon a highway or public road. Legal for race vehicles only. Not legal for sale or use in California.

Features

  • Cast-steel LS engine swap manifold.
  • For 64-67 GM A-Body and 67-81 GM F-Body.
  • Low profile.
  • Reduces radiant heat.
  • Four finishes: Raw Steel, Black Maxx Ceramic, HTC Polished Silver Ceramic, and Matte Silver Ceramic.

Hedman Hedders Cast Iron Manifold for LS Swap

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Demon Carburetion: Screamin’ Demon Carburetors

David Ayers Leave a comment
Use This Post Clip for Email

The product of Demon Carburetion’s continued evolution, Screamin’ Demons are ideal for the weekend racer who demands better drivability and full-throttle performance. These carbs include four-corner idle, changeable idle, and high-speed air bleeds with tunability you’ll find on more expensive carburetors.

Screamin’ Demons are available in 650-850 cfm mechanical secondary models and a 750 cfm vacuum secondary model. They boast lightweight die-cast aluminum fabrication, large-capacity fuel bowls with dual sight glasses, dual threaded inlets on each side, and internal baffling to prevent fuel slosh on the track.

Features

  • Polished die-cast aluminum.
  • New throttle lever with integrated Ford A/T, 700-R4, and Chrysler kick-down options.
  • Fuel bowls with dual threaded inlets, dual sight glass windows, and internal baffling.
  • Secondary fuel bowls with notched floats and jet extensions to prevent fuel starvation.
  • Changeable idle, high-speed air bleeds, and power valve restrictions.

Demon Carburetion Screamin Demon Carbs

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717716): Cat-Back FlowFX Kit for 15’-16’ Challenger R/T 5.7L V8

David Ayers Leave a comment
Use This Post Clip for Email

The new 717716 FlowFX cat-back exhaust system for 2015–2016 Dodge Challenger R/T with 5.7L V8 is the perfect choice to create aggressive exterior and interior tones with all of the performance benefits you’ve come to expect from Flowmaster.

New features include bright 409 stainless steel tubing, two of Flowmaster’s new FlowFX straight-through mufflers with large 3” core, 2.5” Scavenger X-Pipe cross-over, and 2.5” stainless steel tips that exit from the rear bumper valance.

This exhaust system is manufactured in America and covered by the Flowmaster lifetime limited warranty.

Features

  • For 2015–2016 Dodge Challenger R/T with 5.7L V8.
  • Mandrel-bent 490S tubing.
  • Scavenger X-Pipe crossover.
  • Dyno tuned for maximum performance.
  • Includes all required parts and hardware, plus instructions.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster FlowFX Exhaust Kit for Dodge Challenger RT 5.7 V8

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Parts Pro™ Vendor Showcase presents: Optima Batteries

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Parts Pro™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Tyler Daniels goes over what’s new for 2016.

Want to know more about Optima Batteries? Click here:
https://partspro.com/manufacturer/optima-batteries

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Parts Pro™ Vendor Showcase presents: Holley

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Parts Pro™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Scott McLaughlin goes over what’s new for 2016.

Want to know more about Holley? Click here:
https://partspro.com/manufacturer/holley

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (67644): 7,000 lb. Wireless Vehicle-Weighing System

David Ayers Leave a comment
Use This Post Clip for Email

PROFORM’s next-generation wireless vehicle scale features 15” x 15” aluminum scale pads, drive-up angle for easy setup, live stream data feed via USB cable (included), backlit LCD screen and control buttons, and a foam-lined hard case with wheels for easy transport and storage. The individual scale pads boast a 1,750 lb. capacity per pad (7,000 lb. total), and the scale is accurate to one-tenth of one percent.

Display parameters of the 67644 include cross weight, side/side weight, and front/rear weight in addition to the standard weight and percentage for each wheel and total vehicle weight. Scale pads are made of die-cast aluminum and finished in a durable black powdercoat. AA batteries required (and included).

Features

  • Super-slim 15” x 15” aluminum weighing pads.
  • Angled edges for enhanced drive-up.
  • Backlit LCD screen.
  • Wheeled hard storage case with telescoping handle.
  • Free downloadable PC program to display parameters via USB (cord included).

PROFORM 7000 LB Wireless Vehicle Weighing System 67644

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NOS: 4-Bolt Throttle Body Nitrous Plate Kits for GM LS Engines

David Ayers Leave a comment
Use This Post Clip for Email

If you’re running a GM LS-based engine and would like to add up to 250 horsepower, complete nitrous kits from NOS inject a little more power into that stock engine or a lot more power into that custom-built hot rod. Kits include jetting for 100, 125, and 150 additional horsepower, while the plates themselves can flow enough nitrous for 250 big HP.

Available for 4-bolt drive-by-wire or cable-operated throttle bodies in 90mm and 105mm plate sizes, these are “wet” plates. The additional fuel is added though the nitrous system, so there are no requirements for an injector upgrade (but you should always make sure that your fuel delivery system is adequate to support the expected power levels).

Features

  • Add up to 250 HP to GM LS engines.
  • Available for 4-bolt drive-by-wire or cable-operated throttle bodies (90 & 105mm plates).

NOS Four-Bolt Throttle Body Nitrous Plates for GM LS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M (81078): Stealth Side Plate with 12V Button for Right-Hand Magnum Grip Shifter

David Ayers Leave a comment
Use This Post Clip for Email

Designed to fit right-hand Magnum Grip shifters, the 81078 Stealth side plate with 12-volt button from B&M can activate your two-step ignition, trans-brake, or nitrous system. This product boasts a black anodized finish, 6061 aluminum body, and a wire that is completely hidden in a machined channel on the stick.

Features

  • Fits B&M right-hand Magnum Grip shifters.
  • Button activates two-step ignition, trans-brake, or nitrous system.
  • Wire hidden in machined channel.
  • Works with 12V systems.
  • Black anodized finish.

B&M Stealth Side Plate with 12V Button for RH Magnum Grip Shifter 81078

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Cloyes: Hex-A-Just True Roller Sets

David Ayers Leave a comment
Use This Post Clip for Email

The Hex-A-Just True Roller Set, an industry breakthrough when Cloyes introduced it in 1992, still has yet to be equaled in the industry. It is infinitely adjustable to +/- 6 degrees, with no fumbling with offset bushings or machining required: just dial in your cam timing with a wrench and tighten the bolts to lock the cam position. That’s it! You’ll enjoy accurate timing and save many hours of set-up time with the Hex-A-Just.

Cloyes hand matches every Hex-A-Just set to qualify center distance and control run-out.

Quick tech tip: When making cam timing adjustments, first loosen the cam bolts then release the camshaft load.

Features

  • Patented +/- 6 degree adjustments.
  • Induction heat-treated, billet steel sprockets.
  • 3 keyway billet steel crank sprocket.
  • Premium True roller chain with .250” diameter rollers.
  • Hand matched to qualify center distance and control run-out.
  • Some sets available with Z-Chain.
  • All Chevy and BB Chrysler sets include captured thrust bearing.

Cloyes Hex-A-Just True Roller Set 9-3100A

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Parts Pro™ Vendor Showcase presents: Edelbrock

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Parts Pro™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, MIke Kovacs goes over what’s new for 2016.

Want to know more about Edelbrock? Click here:
https://partspro.com/manufacturer/edelbrock

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.