Holley 350/500 CFM Street Avenger 2bbl Carburetors

Holley Introduces 350/500cfm Street Avenger 2bbl Carburetors

Street Avenger carburetors are known to bolt on right out of the box, and Holley is excited to announce the addition of itsnew 2bbl Street Avenger models, available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations, three vacuum ports for all necessary vacuum accessories, factory preset electric choke for easy startups, built-in fuel filters, and an included 3/8” fuel line connection so there are no unnecessary trips back to the parts store.
Avenger carbs are the first to have a limited lifetime warranty. With a great warranty like that and the included comprehensive instruction manual, you can count on years of worry-free service.

  • Vibration polished for good looks
  • Optimized street calibration that works-out-of-the-box
  • Factory preset electric choke for easy startups (range identified and restricted for easy adjustments)
  • Built-in No Trouble fuel inlet filter
  • Street Avenger fuel metering system provides precise fuel control for great low-end torque and awesome acceleration
  • Ford A/T kick down (spring perch included)
  • Gen IV No Trouble power valve
  • Three vacuum ports (1 PCV/brake, 1 timed spark, 1 full)
  • Limited Lifetime Warranty – Guaranteed to be free from defects in material and workmanship for the life of the product!
  • 100% wet-flow tested by Holley technicians to ensure it arrives ready to run!

Applications:

0-80350: 350 CFM 2bbl Street Avenger (electric choke)

0-80500: 500 CFM 2bbl Street Avenger (electric choke)

 

Holley 0-80350
Holley 0-80350

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Hedman 68670

Hedman’s Standard-Duty, Uncoated Headers are manufactured using 18-gauge, mandrel-bent primary tubes (some models built using thicker 16- or 14-gauge tubing) and 1/4 flanges (some models use 3/8″ flanges).

The factory black paint applied to uncoated headers is not hi-temp, and is for pre-installation protection only. For the ultimate in protection against the elements, we suggest Hedman’s Original HTC coating.

All Hedman street hedders are MADE IN THE USA and are backed by a lifetime warranty against manufacturing defects!

 

Applications:

Chevrolet Camaro 1967-1987 (CID: 305, 350, 302, 400, 283, 327)

Chevrolet Nova 1969-1979 (CID: 305, 350, 302, 283, 400, 327)

Chevrolet Chevy II 1968 (CID: 327, 350, 302, 400, 283, 305)

 

Hedman 68670
Hedman 68670

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Centerforce KDF240916

NEW DUAL FRICTION CLUTCH KIT KDF240916

For 1962-1995 Chevrolet and GMC

Light Truck, SUV and Van

Centerforce provides top-of-the-line products for all performance levels using patented processes and thoroughly tested materials and designs to find the best combinations.

 

Features:

  • Centrifugal Weight System
  • Dual Friction Disc
  • Increased Holding Capacity
  • Light Pedal Effort

 

Kit Contents:

  • Pressure Plate
  • Disc
  • Throw Out Bearing
  • Alignment Tool
  • Pilot Bearing
  • Pressure Plate Bolts

 

Centerforce KDF240916
Centerforce KDF240916

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

B&M New Differential Covers for Chrysler, GM, and Chevy

The B&M Cast Aluminum Differential Cover was designed to strengthen the rear end by preventing case distortion, ring gear and cap bearing deflection. Constructed of A356.0-T6 aluminum, this rugged unit dissipates heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. To increase durability and aesthetics without compromising heat dissipation, the cover has been coated with a U.S. military-grade (MIL-A-8625) black anodized finish. Additional features include an engraved B&M logo, added fluid capacity for better cooling, magnetic drain plug for catching ferrous metal particles, complete hardware, installation instructions and a one-year warranty.

 

New Part Numbers:

11306 – Differential Cover Chrysler 9.25″ Cast Aluminum

71501 – Differential Cover GM 10.5″ 14-Bolt Cast Aluminum

71505 – Differential Cover GM 9.5″ 14-Bolt Cast Aluminum

71504 – Differential Cover Chevy 8.875″ 12-Bolt Truck Cast Aluminum

B&M 11306
B&M 11306

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

CarTech’s How to Make Your Muscle Car Handle

For many classic muscle car owners, ramping up the power was never the problem. Poor handling and comfort, however . . . well, that’s just something you had to live with.

Not anymore.

Muscle Car Handling
Muscle Car Handling

Scheduled to land in May 2015, How to Make Your Muscle Car Handle shows you how to pair power and ride quality in a way that will transform your ride into a true driving demon. Suspension expert Mark Savitske tackled the task of revising CarTech’s original book, drawing on more than 30 years’ experience with hot rods and race cars.

Savitske puts the essentials of front and rear suspension geometry in plain language so that you can get the most from your particular system. You’ll receive expert instruction on ride height, shock dampening, and spring rates; learn how to balance sway bars and tubular suspension arms in a way that maximizes adjustability and performance; and become an expert on choosing and installing the most responsive suspension package possible.

If you’d like to unlock the handling and performance potential of your muscle car, look no further than How to Make Your Muscle Car Handle.

The folks over at CarTech do a fantastic job of producing thorough, readable, and knowledgeable how-to guides that span the spectrum of aesthetic and performance automotive modification. Head on over to your local Parts Pro retailer in May to pick up How to Make Your Muscle Car Handle, or find a local affiliated store using our dealer locator.

If you are an automotive aftermarket accessory retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Size:                 8.5” x 11”
Type:               Softcover
Pages:             144
Photos:           325 color photos and charts

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

AIRAID: Add Some Horses to Your Pony

Attention 2015 Ford Mustang 5.0L owners: If you’re looking to add some oomph to your ride, consider the simple, bolt-on performance upgrade you’ll get from AIRAID’s Modular Intake Tube (450-932).

Airaid Ford Mustang 5.0
Airaid Ford Mustang 5.0

Factory setups don’t always give you what you need to get the most out of your engine. Accordion-shaped walls, undersized tubes, and sound-cancelling baffles can all diminish airflow. The AIRAID MIT provides a straighter intake channel while improving the position of your Mustang’s mass-air sensor.

Working with your car’s factory throttle body and intake box, the AIRAID 450-932 features cross-linked, high-strength polyethylene material; stainless steel hose clamps; and a silicone coupler and hump hose. The American-made Modular Intake Tube was designed to accommodate all your factory sensors and fittings. And if all that weren’t enough, AIRAID’s no-hassle warranty makes the final decision easy.

Head on over to your local Parts Pro retailer to grab an AIRAID Modular Intake Tube for your 2015 Mustang 5.0. Or find your closest affiliated store using our dealer locator.

If you are a performance aftermarket retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Get Some Free with MSD

Do you attend Detroit Autorama, Hot Rod Power Tour, or your local car show? Spring is just around the corner, and MSD Ignition is ready to help you fuel or spark your ride in time for the show season!

Through March 15, 2015, you can get a free 6A Ignition Coil or Blaster 2 Coil at no charge with an eligible purchase:

6A Ignition Control, FREE with Purchase Of:

  • Atomic TBI Master Kit (#2900)
  • Atomic TBI Basic Kit (#2910)
MSD 6A Ignition Control
MSD 6A Ignition Control

Blaster 2 Coil, FREE with Purchase Of:

  • MSD 6A Ignition Control (#6201)
  • MSD 6AL Ignition Control (#6425)
MSD Blaster 2 Coil
MSD Blaster 2 Coil

Cash in your Free with MSD promotion by shopping at your local Parts Pro retailer, or find a local affiliated store using our dealer locator.

If you are a performance aftermarket accessory retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Holley Dominator Fuel Pump

Pump Your Ride: New HP and Dominator Fuel Pumps from Holley

Holley recently announced additions to its HP and Dominator Fuel Pump lines, both designed with improved hot–fuel handling capabilities to diminish the effects of heated fuel now common with many modern pump gas blends.

Holley HP Fuel Pump
Holley HP Fuel Pump

Compatible with pump or race gas, Holley’s new HP and Dominator Fuel Pumps are engineered to work with your carbureted or fuel-injected street vehicle or race car. They feature OEM gerotor technology to achieve quiet, lightweight results as well as dependable operation at more than 100,000 miles.

Both Holley pumps can be wired for full-time duty for maximum value, and are 18.5-volt compatible at pressures up to 80 PSI.

Grab your own Holley HP or Dominator Fuel Pump at your local Parts Pro retailer, or find a local affiliated store using our dealer locator.

If you are a performance aftermarket accessory retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Go Pro with Holley’s New Four-Barrel 1,000 CFM Throttle Body

Using the same air entry area design as those used in NASCAR Sprint Cup Series™ cars, the new 1,000 CFM throttle body from Holley is designed for high-horsepower, severe-use applications.

Holley CFM Black
Holley CFM Black

Fitting any standard square bore 4150 flange, these throttle bodies boast a number of exciting features:

  • Exclusive CFD computer-modeled design
  • Integrated throttle position, idle air control, and air temperature sensors
  • GM 700R4 and Ford transmission kickdown provisions
  • High-flow idle air control passage
  • PTFE-coated throttle shafts for high flow and a smooth pedal feel

Holley has included everything you need to supercharge your ride, including integrated vacuum ports (one timed spark, two 3/8” full, and two 3/16” full). The die-cast aluminum throttle bodies come in two handsome finishes—tumble polished or Hard Core Gray™—so you won’t have to sacrifice looks for performance.

Holley CFM Chrome
Holley CFM Chrome

Head on over to your local Parts Pro retailer to grab one for yourself, or find a local affiliated store using our dealer locator.

If you are a performance aftermarket accessory retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

CarTech’s Trosley’s How to Draw Cartoons Cars

A Peek Between the Covers

Many of you know how to take cars apart and put them back together in a three-dimensional workshop, but how good are you at rendering them in two dimensions on paper?

How to Draw Cars
How to Draw Cars

Scheduled to land in March 2015, and written and illustrated by industry legend George Trosley, Trosley’s How to Draw Cartoon Cars takes readers through the step-by-step process of drawing their favorite cars, starting with the basics such as profiles, point of view, speed, attitudes, custom graphics, and coloring. You’ll learn how to draw components like wheels, engines, and accessories, and receive step-by-step lessons on many different body styles: Corvettes, Mustangs, pickups, off-roaders, muscle cars, and hot rods, to name a few.

Whether you’re an artist who wants to expand your portfolio to include performance vehicles, or an enthusiast who wants to learn to draw your own pet projects, Trosley’s How to Draw Cartoon Cars will make a great addition to your automotive or art library.

The folks over at CarTech do a fantastic job of producing thorough, readable, and knowledgeable how-to guides that span the spectrum of aesthetic and performance automotive modification. Head on over to your local Parts Pro retailer in March to pick up Trosley’s How to Draw Cartoon Cars, or find a local affiliated store using our dealer locator.

If you are an automotive aftermarket accessory retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Size:                 8.5” x 11”
Type:               Softcover
Pages:             144
Photos:           462 photos

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.