Tag: 6.2L

AIRAID (250-274): MXP Performance Air Intake System for ’14-’19 Chevrolet Corvette 6.2L

John Arnaud Leave a comment
Use This Post Clip for Email

The 250-274 AIRAID MXP performance air intake system delivers horsepower and acceleration gains (12.13 HP on the dyno) for certain 2014–2019 Chevy Corvette 6.2L models. Its two-piece, roto-molded replacement air box addresses all the shortcomings of the restrictive factory design, with a premium AIRAID air filter for outstanding air flow and filtration.

This easy-to-install system directs air through a precision computer-modeled air intake tube constructed of cross-linked, high-density polyethylene designed to maintain proper mass air flow readings and calibration. The heat-shielded air intake tube and integrated velocity stack further promote airflow, with provisions for the factory mass air sensor and PCV lines.

Together, these features create a potent increase in airflow while maintaining proper air-to-fuel ratios (no recalibration needed after installation—just bolt it on and go!). Backed by AIRAID’s No Hassle Lifetime Warranty.

Note: Not legal for sale or use in California. Not compatible with 2015–2019 Z06 or 2019 ZR1 models.

Features

  • Red oiled premium air filter recommended for dusty, dry driving conditions.
  • Superior horsepower and acceleration gains.
  • Replaces stock intake tubing, air filter, and air box.
  • Easy to install using commonly available tools.
  • High-airflow washable and reusable air filter media.
  • MXP air box incorporates a window for filter inspection.
  • Installation: 90 minutes with basic tools.
  • Warranty: No Hassle Lifetime.
AIRAID MXP Performance Air Intake System for 14-19 Corvette 6.2L 250-274

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

John Arnaud Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders (62566): HTC-Coated Stainless Steel Headers for Chevrolet Camaro 2010-2013 6.2L

Donnie Hurt Leave a comment
Use This Post Clip for Email

After more than 50 years of manufacturing headers using mild steel materials, Hedman Hedders announces the introduction of performance headers manufactured using 304 stainless steel and HTC-thermal-coated 3/8″ flanges and 16-gauge 1-3/4″ tubing. All Hedman street headers are made in the USA and backed by a lifetime warranty against manufacturing defects! The HTC coating is covered for a full 5 years.

These headers are not applicable or intended for street or highway use. They are legal for racing vehicles only and may never be used upon a highway or public road. Not legal for sale or use in California.

Hedman 62566
Hedman 62566

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ARP (234-7208): Pro Series Rocker Stud Kit for Small Block Chevy 6.2L (LT1/LT4)

Donnie Hurt Leave a comment
Use This Post Clip for Email

ARP, the world leader in fastener technology, has just released a new Pro Series Rocker Stud Kit for Small Chevy 6.2L (LT1/LT4) engines.

ARP 234-7208 includes a set of sixteen 8740 chrome-moly Pro Series rocker studs and sixteen chrome-moly flange nuts.

All ARP Pro Series rocker studs are heat treated prior to thread rolling and machining and are nominally rated at 200,000 PSI tensile strength—substantially stronger than grade 8 hardware. Optimum design, enhanced reliability, and increased strength distinguish ARP’s Pro Series Rocker Stud Kits.

ARP 234-7208
ARP 234-7208

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce (04614877): DYAD DS TWIN 2014-2015 Chevrolet Corvette 6.2L LT1

Donnie Hurt Leave a comment
Use This Post Clip for Email

Introducing the new Centerforce DYAD DS Twin, part number 04614877, for 2014-2015 Chevrolet Corvette 6.2L LT1 8-cylinder engines. The pressure plate features Centerforce’s patented Centrifugal Weight System for superior clamp load over stock and ball bearing for light pedal effort. The discs are equipped with segmented “puc”-style facings on both sides, providing increased holding capacity and longevity. Lightened steel billet flywheel allows for increased RPM. Find out why Centerforce clutches have led the way in innovation for more than 30 years.

Centerforce 04614877
Centerforce 04614877

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6350001): 2014-2015 Chevrolet Camaro SS 6.2L Cat-Back System

Donnie Hurt Leave a comment
Use This Post Clip for Email

Hurst’s new Elite Series cat-back exhaust system for the 2014-2015 Camaro SS 6.2L V8 is constructed using the highest-quality materials and finest craftsmanship available today. Hurst Elite Series systems feature fully mandrel-bent 304s stainless steel tubing that has been custom designed and exclusively manufactured by industry-leading Flowmaster Inc. to ensure a precise fit every time! Hurst engineers then added an X-pipe crossover, which provides maximum scavenging, sound, and performance, and paired it with a set of fully polished 304s stainless steel Hurst mufflers. The mufflers use a high-thermal sound-absorption barrier with a large 3″ straight-through performance core that provides a deep, classic tone reminiscent of Hurst’s iconic heritage. The 4″ mirror-polished stainless steel tips, featuring laser-etched Hurst logos, finish off the system and put the world on notice that you’re serious about performance and style. You can take comfort and pride knowing that every Hurst Elite Series cat-back exhaust system is hand fabricated in the USA and backed by a Lifetime Limited Warranty.

Note: Does not fit models equipped with the “Dual Mode Exhaust/Quad Tip” option.

Hurst_6350001
Hurst_6350001

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.