AIRAID (451-356): MXP Performance Air Intake System for 2019 Ford Mustang GT 5.0L

The 451-356 AIRAID MXP performance air intake system delivers horsepower and acceleration gains (+16.5 HP on the dyno) for the 2019 Ford Mustang GT 5.0L. The roto-molded replacement air box addresses all the shortcomings of the restrictive factory design, with a premium AIRAID air filter for outstanding air flow and filtration.

This easy-to-install system directs air through a precision computer-modeled air intake tube constructed of cross-linked, high-density polyethylene designed to maintain proper mass air flow readings and calibration. An integrated velocity stack further promotes airflow.

Together, these features create a potent increase in airflow while maintaining proper air-to-fuel ratios (no recalibration needed after installation—just bolt it on and go!). Backed by AIRAID’s No Hassle Lifetime Warranty.

Note: Not legal for sale or use in California.

Features

  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter, and air box (where applicable).
  • Easy to install using commonly available tools
  • Easy-to-clean, oil-free synthetic air filter
  • Washable and reusable air filter media
  • Installation: 90 minutes with basic tools
  • Warranty: No Hassle Lifetime
AIRAID MXP Performance Air Intake System for 2019 Ford Mustang GT 5.0L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (250-274): MXP Performance Air Intake System for ’14-’19 Chevrolet Corvette 6.2L

The 250-274 AIRAID MXP performance air intake system delivers horsepower and acceleration gains (12.13 HP on the dyno) for certain 2014–2019 Chevy Corvette 6.2L models. Its two-piece, roto-molded replacement air box addresses all the shortcomings of the restrictive factory design, with a premium AIRAID air filter for outstanding air flow and filtration.

This easy-to-install system directs air through a precision computer-modeled air intake tube constructed of cross-linked, high-density polyethylene designed to maintain proper mass air flow readings and calibration. The heat-shielded air intake tube and integrated velocity stack further promote airflow, with provisions for the factory mass air sensor and PCV lines.

Together, these features create a potent increase in airflow while maintaining proper air-to-fuel ratios (no recalibration needed after installation—just bolt it on and go!). Backed by AIRAID’s No Hassle Lifetime Warranty.

Note: Not legal for sale or use in California. Not compatible with 2015–2019 Z06 or 2019 ZR1 models.

Features

  • Red oiled premium air filter recommended for dusty, dry driving conditions.
  • Superior horsepower and acceleration gains.
  • Replaces stock intake tubing, air filter, and air box.
  • Easy to install using commonly available tools.
  • High-airflow washable and reusable air filter media.
  • MXP air box incorporates a window for filter inspection.
  • Installation: 90 minutes with basic tools.
  • Warranty: No Hassle Lifetime.
AIRAID MXP Performance Air Intake System for 14-19 Corvette 6.2L 250-274

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (252-381): MCAD Air Intake System for ’16-’19 Chevrolet Camaro SS 6.2L

All-black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX synthetic filter give your Camaro SS a boost with increased torque and horsepower (up to 21.7 on the dyno). The AIRAID MCAD intake system removes the stock intake track on your vehicle and adds an open-element air inlet protected by cold air dam panels, protecting the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage; it’s also washable and reusable.

The 252-381 AIRAID MCAD intake system mounts in your Camaro’s factory location with no drilling required; in fact, installation typically clocks in at less than 90 minutes using standard hand tools.

Note: Not legal for sale or use in California.

Features

  • Increases horsepower and torque.
  • Replaces stock air box, air filter, and intake tubing.
  • Durable powder-coated finish.
  • Low-restriction aluminum intake tube.
  • Easy to install using standard tools.
  • Easy-to-clean, oil-free, reusable synthetic air filter.
  • Warranty: “NO-Hassle” lifetime limited.
AIRAID MCAD Air Intake System for Chevy Camaro SS 252-381

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N 63-2589 63 Series AirCharger Kit for 2015 Ford Mustang 2.3L

The K&N 63-2589 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-2589 air intake comes with a chrome-topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow-off valve. The oversized cone-shaped air filter can be used for up to 100,000 miles before servicing is needed, depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed horsepower gain
  • Designed to improve throttle response and engine sound
  • Free-flowing high density polyethylene tube
  • Replaces entire factory air intake system
  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty

K&N 63-2589
K&N 63-2589

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.