Tag: airaid

AIRAID (451-356): MXP Performance Air Intake System for 2019 Ford Mustang GT 5.0L

David Ayers Leave a comment
Use This Post Clip for Email

The 451-356 AIRAID MXP performance air intake system delivers horsepower and acceleration gains (+16.5 HP on the dyno) for the 2019 Ford Mustang GT 5.0L. The roto-molded replacement air box addresses all the shortcomings of the restrictive factory design, with a premium AIRAID air filter for outstanding air flow and filtration.

This easy-to-install system directs air through a precision computer-modeled air intake tube constructed of cross-linked, high-density polyethylene designed to maintain proper mass air flow readings and calibration. An integrated velocity stack further promotes airflow.

Together, these features create a potent increase in airflow while maintaining proper air-to-fuel ratios (no recalibration needed after installation—just bolt it on and go!). Backed by AIRAID’s No Hassle Lifetime Warranty.

Note: Not legal for sale or use in California.

Features

  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter, and air box (where applicable).
  • Easy to install using commonly available tools
  • Easy-to-clean, oil-free synthetic air filter
  • Washable and reusable air filter media
  • Installation: 90 minutes with basic tools
  • Warranty: No Hassle Lifetime
AIRAID MXP Performance Air Intake System for 2019 Ford Mustang GT 5.0L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (250-274): MXP Performance Air Intake System for ’14-’19 Chevrolet Corvette 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

The 250-274 AIRAID MXP performance air intake system delivers horsepower and acceleration gains (12.13 HP on the dyno) for certain 2014–2019 Chevy Corvette 6.2L models. Its two-piece, roto-molded replacement air box addresses all the shortcomings of the restrictive factory design, with a premium AIRAID air filter for outstanding air flow and filtration.

This easy-to-install system directs air through a precision computer-modeled air intake tube constructed of cross-linked, high-density polyethylene designed to maintain proper mass air flow readings and calibration. The heat-shielded air intake tube and integrated velocity stack further promote airflow, with provisions for the factory mass air sensor and PCV lines.

Together, these features create a potent increase in airflow while maintaining proper air-to-fuel ratios (no recalibration needed after installation—just bolt it on and go!). Backed by AIRAID’s No Hassle Lifetime Warranty.

Note: Not legal for sale or use in California. Not compatible with 2015–2019 Z06 or 2019 ZR1 models.

Features

  • Red oiled premium air filter recommended for dusty, dry driving conditions.
  • Superior horsepower and acceleration gains.
  • Replaces stock intake tubing, air filter, and air box.
  • Easy to install using commonly available tools.
  • High-airflow washable and reusable air filter media.
  • MXP air box incorporates a window for filter inspection.
  • Installation: 90 minutes with basic tools.
  • Warranty: No Hassle Lifetime.
AIRAID MXP Performance Air Intake System for 14-19 Corvette 6.2L 250-274

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (252-381): MCAD Air Intake System for ’16-’19 Chevrolet Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

All-black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX synthetic filter give your Camaro SS a boost with increased torque and horsepower (up to 21.7 on the dyno). The AIRAID MCAD intake system removes the stock intake track on your vehicle and adds an open-element air inlet protected by cold air dam panels, protecting the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage; it’s also washable and reusable.

The 252-381 AIRAID MCAD intake system mounts in your Camaro’s factory location with no drilling required; in fact, installation typically clocks in at less than 90 minutes using standard hand tools.

Note: Not legal for sale or use in California.

Features

  • Increases horsepower and torque.
  • Replaces stock air box, air filter, and intake tubing.
  • Durable powder-coated finish.
  • Low-restriction aluminum intake tube.
  • Easy to install using standard tools.
  • Easy-to-clean, oil-free, reusable synthetic air filter.
  • Warranty: “NO-Hassle” lifetime limited.
AIRAID MCAD Air Intake System for Chevy Camaro SS 252-381

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: Get a $25 Card or a Free Hat with Air Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good November 1–30. Click image for printable form and complete details!

 

AIRAID $25 Card on Air Intake Systems

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: $25 Back on Any Intake System

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

AIRAID Summer Sale 25 Dollars Back on Any Intake

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: MXP Cold Air Intake for ’12-’15 Supercharged Chevy Camaro ZL1

David Ayers Leave a comment
Use This Post Clip for Email

The MXP series cold air intake for 2012–2015 supercharged Chevrolet Camaro ZL1 with 6.2 liter engine from AIRAID features a large, one-piece, roto-molded air box that uses the OEM scoop, a massive 4.25” induction tube with billet aluminum MAF housing, premium AIRAID SynthaMax non-oiled air filter, and complete high-grade hardware. This product requires the use of aftermarket tuning due its low-restriction design, which funnels more oxygen-rich air into the engine.

Three color options are available: 251-308 (red filter), 252-308 (black filter), and 253-308 (blue filter).

Features

  • 25” induction tube with billet aluminum MAF housing.
  • Aftermarket tuning required.
  • Replaces stock intake tubing, air filter, and air box.
  • Three air filter colors: red, black, and blue.
  • Backed by AIRAID’s lifetime “no-hassle” warranty!

AIRAID MXP Cold Air Intake for Supercharged Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (100-025): You-Build-It Air Intake Tube

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking to build an air intake system for your custom project, the 100-025 UBI (you-build-it) air intake set from AIRAID should be your first stop. Including a variety of bends and straight pipes, the 2.5” diameter, one-piece, roto-molded tube can be cut to lengths or bends to suit your project needs. You’ll find 30-, 45-, 60-, and 90-degree bends: just measure off the size you need and cut off the segment.

Features

  • Perfect for custom projects.
  • Variety of bends and straight sections.
  • Includes 30°, 45°, 60°, and 90°

AIRAID 100-025 UBI Intake Tube

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (450-745): AIRAID Jr. Intake Kit for ’11-’14 Mustang 3.7L

David Ayers Leave a comment
Use This Post Clip for Email

The AIRAID Jr. Kit from AIRAID targets the restrictive elements of factory intake systems—specifically the intake tube and paper filter—to boost horsepower and mileage. The 450-745 is a simple, economical introduction into the performance aftermarket, “straightening” air flow to the engine for added throttle response and increased horsepower and torque.

Designed specifically for your 2011–2014 Ford Mustang with 3.7L V6 engine, this kit installs with no drilling and includes a washable, reusable, oiled replacement filter backed by the AIRAID No-Hassle Lifetime Warranty.

Note: 450-745 is street legal in all US states (CARB EO Number D-609-11).

Features

  • Oiled direct-fit replacement filter (recommended for dusty, dry driving conditions).
  • Helps boost horsepower and acceleration.
  • Replaces stock air filter and intake tubing while retaining stock air box.
  • High-airflow premium air filter.
  • Low-restriction polyethylene intake tube.
  • Easy to install with little mechanical knowledge.
  • Washable and reusable air filter media.
  • AIRAID’s No-Hassle Lifetime Warranty.

AIRAID (450-745): AIRAID Jr. Intake Kit for ’11-’14 Mustang 3.7L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage with Parts Pro Performance Centers™: AIRAID MXP Cold Air Intake System

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro Performance Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we take a closer look at the MXP Air Intake System from AIRAID and install it on a 2015 Ford F-150

Parts used in this video:

AIRAID MXP Cold Air Intake System (401-338)

Want to check out more about AIRAID?
http://partspro.com/manufacturer/airaid

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (450-930): Modular Intake Tube for 2015 2.3L EcoBoost Mustang

David Ayers Leave a comment
Use This Post Clip for Email

Want more horsepower and torque for your 2015 2.3L EcoBoost Ford Mustang? AIRAID Modular Intake Tubes (MITs) provide a smooth airway to the throttle body, improving airflow up to an additional 400 cfm over restrictive stock intake tubes.

Constructed from cross-linked, high-density polyethylene and built to specification for your specific model, this MIT can be used to replace your stock air intake tube or added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions.

Not legal for sale or use in California.

  • Engineered to boost horsepower and torque.
  • Low-restriction, free-flowing intake tube.
  • Roto-molded, high-density polyethylene material.
  • Stainless steel clamps and silicone couplers/hump hoses included.
  • No-hassle lifetime warranty.

AIRAID (450-930): Modular Intake Tube for 2015 2.3L EcoBoost Mustang
AIRAID (450-930): Modular Intake Tube for 2015 2.3L EcoBoost Mustang

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.