Tag: Camaro

Edelbrock: E-Force Supercharger System for 2016 Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

The new E-Force Supercharger from Edelbrock is a Stage 1 Street system that provides more horsepower and torque for your 2016 Chevy Camaro SS (auto: #1558, manual: #1559). How much more? The 1559 puts stock power up to 580 hp and 548 ft.-lb. of torque at the real wheels. That’s an extra 140 horsepower and 124 foot-pounds of torque!

These E-Force Superchargers are designed to work with all OEM emissions equipment, which will make them 50-state emissions legal (EO number pending). Combined with great looks (black powder-coated supercharger assembly and bright-red coil covers) and an incredible 3-year/36,000-mile warranty, that makes these systems a great choice for your daily driver.

Enthusiasts will appreciate the Eaton 2300 TVS rotor assembly, air-to-water twin intercooler system, and dual pass heat exchanger. Edelbrock has fine-tuned the performance via a unique runner design and an integrated bypass value, which help reduce parasitic loss under light throttle—thus improving potential fuel efficiency. And it all goes under the hood without any modification!

  • Stage 1 Street systems for manual (1559) and automatic (1558) ’16 SS Camaros.
  • Designed to work with OEM emissions equipment (EO number pending).
  • Black powder-coated supercharger assembly.
  • Bright red coil covers.
  • Eaton 2300 TVS rotor assembly.
  • No under-hood modification.
  • 3-year/36,000-mile warranty.
Edelbrock: E-Force Supercharger System for 2016 Camaro SS
Edelbrock: E-Force Supercharger System for 2016 Camaro SS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro

David Ayers Leave a comment
Use This Post Clip for Email

With a continuous temperature rating of between -94° and 257° F and a melting point of 482° F, the PowerBraid from Painless Performance is engineered to enhance and protect the insulation of any electrical wire bundles or cables. In addition, it cleans up cluttered and unsightly engine bays. This kit is for use with any of the following second-generation Camaro harnesses: 20112, 20113, or 20114.

Made from tough-woven, flexible, and semi-rigid material, PowerBraid provides excellent drainage and maintains superior abrasion resistance. The split loom design has a minimum overlap of 25 percent, allowing for easy installation and optimal wiring protection. The 70923 kit includes multiple PowerBraids in various lengths and widths, plus heat shrinks, tie wraps, and rolls of electrical and stretch/seal tape.

  • Flexible, tough, semi-rigid protection for electrical wire bundles/cables.
  • Continuous temperature rating of -94° to 257° F.
  • Melting point: 482° F.
  • Split loom design with 25% overlap.
  • Includes various PowerBraids, heat shrinks, tie wraps, and tape.
  • Keeps engine compartment looking sharp.
Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro
Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Flowtech headers offer the perfect combination of quality and value. These shorty headers fit the popular 2010–2014 Chevy Camaro with V8 6.2L engine and are a must if you’re using a cold air intake, cat-back exhaust system, or a tuner. With their silver-metallic ceramic coating, these 16-gauge headers offer increased strength and durability in addition to smooth flow and increased exhaust velocity. CARB E.O. pending!

  • Mandrel-bent tubes let your system breathe for increased power.
  • Smooth transition, 1-3/4” diameter primary tubes.
  • Unique-cast 2-1/2” collector for maximum strength.
  • TIG-welded, machined 3/8” header flange for a strong, leak-free seal.
  • Designed for a hassle-free installation; accommodate all factory OE components.
  • Premium aluminum header gaskets included.
  • Silver metallic ceramic coating.
Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L
Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker (70501323-RHKR): Blackheart 2014-2015 Camaro 3.6L V6 Cat-Back Exhaust Kit

David Ayers Leave a comment
Use This Post Clip for Email

At the heart of any performance vehicle is the exhaust system. Hooker, with its classic heart logo, has been at the core of the exhaust industry for decades. Many of the most powerful vehicles on the planet have used Hooker Headers, and the company continues to push the boundaries of performance with the new Blackheart line of exhaust systems for popular late-model vehicles. The Blackheart platform is designed to be a full exhaust program, from the cylinder head flange to the tailpipe, for maximum exhaust velocity, ground clearance, style, performance, and quality!

  • 2.5” lightweight, 18-gauge 304 stainless steel for strength and durability
  • Quality welds for longevity and good looks
  • Available in a high-flow, straight-through design with or without muffler
  • Dual 4” angle-cut, single-wall polished 304 stainless steel tips with laser-etched Hooker Blackheart logo
  • Uses factory mounting points for easy installation
  • Tube geometry designed for maximum ground clearance and hassle-free install
  • Limited lifetime warranty
Hooker 70501323-RHKR
Hooker 70501323-RHKR

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman 68670

David Ayers Leave a comment
Use This Post Clip for Email

Hedman’s Standard-Duty, Uncoated Headers are manufactured using 18-gauge, mandrel-bent primary tubes (some models built using thicker 16- or 14-gauge tubing) and 1/4 flanges (some models use 3/8″ flanges).

The factory black paint applied to uncoated headers is not hi-temp, and is for pre-installation protection only. For the ultimate in protection against the elements, we suggest Hedman’s Original HTC coating.

All Hedman street hedders are MADE IN THE USA and are backed by a lifetime warranty against manufacturing defects!

 

Applications:

Chevrolet Camaro 1967-1987 (CID: 305, 350, 302, 400, 283, 327)

Chevrolet Nova 1969-1979 (CID: 305, 350, 302, 283, 400, 327)

Chevrolet Chevy II 1968 (CID: 327, 350, 302, 400, 283, 305)

 

Hedman 68670
Hedman 68670

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.