Tag: CAT-BACK

JBA (40-2647): Stainless Steel Cat-Back Exhaust System for ’18-’19 Ford Mustang 5.0

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking to add more power, sound, and quality to your 2018–2019 Ford Mustang 5.0, this JBA exhaust system delivers, specially tuned by the JBA experts to provide a robust exhaust tone that won’t overwhelm the interior of the vehicle. The 40-2647 kit replaces the restrictive factory exhaust system with free-flowing, mandrel-bent, stainless steel X-pipes and quality performance mufflers, finished off by polished, chrome-plated, double-wall 4” stainless steel tips that resist discoloration. Setup includes quality hardware and thorough instructions for a bolt-on installation.

Features

  • For 2018–2019 Ford Mustang 5.0
  • Increased horsepower/torque and improved throttle response
  • Powerful exhaust tone with terrific flow and durability
  • Large-diameter, stainless steel, mandrel-bent tube
  • High-flow stainless steel mufflers and polished chrome tips
  • Factory-style hangers and quality hardware (no extra parts needed)
JBA Stainless Steel Cat Back Exhaust System for 18-19 Mustang 5.0 40-2647

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (817845): Cat-Back 409S Outlaw Exhaust Kit for ’17-’18 Dodge Charger R/T and Daytona with 5.7L Engine

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking for aggressive exterior and interior sound for your 2017–2018 Dodge Charger R/T or Daytona with 5.7L engine, the Outlaw cat-back exhaust system is your pick. Perfect for drivers unafraid of the extra attention this system is sure to draw, the Flowmaster 817845 kit features 3” 409 stainless steel, mandrel-bent tubing; a pair of race-inspired Outlaw Series mufflers; and a 3” Scavenger Series X-pipe for maximum performance. The tailpipes include active exhaust valves and are finished with 4” stainless steel tips that exit the factory exhaust cutouts.

Designed for an easy fit, this Flowmaster system includes all necessary parts, hardware, and installation instructions. Manufactured in the USA.

Features

  • For 2017–2018 Dodge Charger R/T and Daytona with 5.7L engine and standard bumper cutout.
  • Dyno-tuned for maximum performance.
  • 409 stainless steel construction.
  • Easy installation.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster Cat Back 409S Exhaust Kit for Charger RT and Daytona 817845

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717831): FlowFX Cat-Back Exhaust Kit for ’11-’14 Charger R/T & Chrysler 300C

David Ayers Leave a comment
Use This Post Clip for Email

The FlowFX Cat-Back Exhaust Kit is perfect for Charger R/T and Chrysler 300C (with 5.7L Hemi) owners who want moderately aggressive exterior and interior sound levels with uncompromised Flowmaster performance benefits.

The 717831 kit includes mandrel-bent 2.5” 409 stainless steel tubing, Scavenger X-Pipe crossover, and a pair of FlowFX straight-through mufflers with 2.5” polished stainless steel tips that exit from the factory exhaust bezel.

Easy to install, this made-in-America system includes all necessary parts, hardware, and instructions.

Features

  • For 2011–2014 Dodge Charger R/T and Chrysler 300C with 5.7L Hemi.
  • Provides a moderately aggressive exterior and interior tone.
  • Dyno tuned for maximum performance.
  • 409 SS construction.
  • Scavenger X-Pipe crossover.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster, FlowFX Cat-Back Exhaust for Charger and 300C 717831

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717778): FlowFX Cat-Back Exhaust System for 2017 Charger R/T

David Ayers Leave a comment
Use This Post Clip for Email

The 717778 FlowFX cat-back exhaust system for 2017 Dodge Charger R/T with 5.6 V8 Hemi produces an aggressive exterior and interior sound level with all of the performance benefits you expect from Flowmaster. New features include bright 409S stainless steel tubing; a pair of Flowmaster’s new FlowFX straight-through mufflers with a large 3.00 inch core for maximum performance; and a deep, aggressive sound.

Flowmaster’s system uses a 3.00 inch Scavenger X-pipe cross-over and mandrel-bent tubing for maximum performance. It’s then finished off with 3.00 inch stainless steel tips that exit within the factory exhaust tips in the rear bumper valance. The two-piece tailpipes are designed to reuse the factory exhaust valves.

Features

  • Straight-through performance mufflers and sound.
  • Bright 409s stainless steel tubing and mufflers.
  • Scavenger X-pipe cross-over.
  • Reuses factory exhaust valves.
  • Includes all necessary parts, hardware, and instructions.
  • Made in the USA.
  • Warranty: lifetime limited.

Flowmaster FlowFX Cat Back Exhaust for 2017 Charger 717778

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (817760): Outlaw Cat-Back Exhaust System with Moderate/Aggressive Sound

David Ayers Leave a comment
Use This Post Clip for Email

Designed for Dodge applications with the factory Active Exhaust option, the 817760 Outlaw cat-back exhaust system from Flowmaster provides an aggressive, wide-open exterior sound level when hard on the gas and a moderate exterior/interior sound while cruising. This bolt-on 409S stainless steel system features a dual 3.00” Scavenger X-pipe assembly that runs into a pair of specially built Super 40 Series mufflers, uses 3.00” mandrel-bent tailpipes with built-in active exhaust valves, and is finished off with 3.50” quad stainless steel embossed tips. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Made in the USA!

Fits: 2015–2017 Dodge Challenger SRT 392 and R/T Scat Pack with 6.4L engine and SRT Hellcat with 6.2L engine.

Features

  • For factory Active Exhaust option.
  • Dyno-tuned for maximum performance.
  • Stainless steel construction.
  • Made in America.

Flowmaster Outlaw Cat Back Exhaust 817760

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717716): Cat-Back FlowFX Kit for 15’-16’ Challenger R/T 5.7L V8

David Ayers Leave a comment
Use This Post Clip for Email

The new 717716 FlowFX cat-back exhaust system for 2015–2016 Dodge Challenger R/T with 5.7L V8 is the perfect choice to create aggressive exterior and interior tones with all of the performance benefits you’ve come to expect from Flowmaster.

New features include bright 409 stainless steel tubing, two of Flowmaster’s new FlowFX straight-through mufflers with large 3” core, 2.5” Scavenger X-Pipe cross-over, and 2.5” stainless steel tips that exit from the rear bumper valance.

This exhaust system is manufactured in America and covered by the Flowmaster lifetime limited warranty.

Features

  • For 2015–2016 Dodge Challenger R/T with 5.7L V8.
  • Mandrel-bent 490S tubing.
  • Scavenger X-Pipe crossover.
  • Dyno tuned for maximum performance.
  • Includes all required parts and hardware, plus instructions.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster FlowFX Exhaust Kit for Dodge Challenger RT 5.7 V8

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 3” 18-gauge stainless steel, the BlackHeart Cat-Back Exhaust with Dual Mode Mufflers NPP for 2014–2015 C7 Corvette from Hooker produces a mellow, throaty tone when the valve is closed and aggressive race attitude when the value is open. Notably, this product boasts a huge 3” bypass valve that uses the factory NPP actuator, as well as a Siamese X-pipe with increased scavenging for maximum performance gains. The system retains all factory catalytic converters (some cutting is required).

Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” twin-wall polished stainless tips with laser-etched Hooker logo. The 70501349-RHKR system uses factory mounting points to facilitate installation, while Hooker’s advanced tube geometry allows for straight-through performance and maximum ground clearance. All hardware is included.

  • Fits ’14–’15 C7 Corvette.
  • 3” 18-gauge stainless steel construction.
  • 4” twin-wall polished tips.
  • Straight-through, high-flow performance.
  • 3” bypass valve utilizes factory NPP actuator.
  • Retains all factory catalytic converters (cutting required).
  • Siamese X-pipe for increased scavenging.
  • Factory-style 3” AFM valves prevent check engine light engagement and reduce unwanted harmonics while in 4-cylinder mode.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.

Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Flowtech headers offer the perfect combination of quality and value. These shorty headers fit the popular 2010–2014 Chevy Camaro with V8 6.2L engine and are a must if you’re using a cold air intake, cat-back exhaust system, or a tuner. With their silver-metallic ceramic coating, these 16-gauge headers offer increased strength and durability in addition to smooth flow and increased exhaust velocity. CARB E.O. pending!

  • Mandrel-bent tubes let your system breathe for increased power.
  • Smooth transition, 1-3/4” diameter primary tubes.
  • Unique-cast 2-1/2” collector for maximum strength.
  • TIG-welded, machined 3/8” header flange for a strong, leak-free seal.
  • Designed for a hassle-free installation; accommodate all factory OE components.
  • Premium aluminum header gaskets included.
  • Silver metallic ceramic coating.

Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L
Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker (70501323-RHKR): Blackheart 2014-2015 Camaro 3.6L V6 Cat-Back Exhaust Kit

David Ayers Leave a comment
Use This Post Clip for Email

At the heart of any performance vehicle is the exhaust system. Hooker, with its classic heart logo, has been at the core of the exhaust industry for decades. Many of the most powerful vehicles on the planet have used Hooker Headers, and the company continues to push the boundaries of performance with the new Blackheart line of exhaust systems for popular late-model vehicles. The Blackheart platform is designed to be a full exhaust program, from the cylinder head flange to the tailpipe, for maximum exhaust velocity, ground clearance, style, performance, and quality!

  • 2.5” lightweight, 18-gauge 304 stainless steel for strength and durability
  • Quality welds for longevity and good looks
  • Available in a high-flow, straight-through design with or without muffler
  • Dual 4” angle-cut, single-wall polished 304 stainless steel tips with laser-etched Hooker Blackheart logo
  • Uses factory mounting points for easy installation
  • Tube geometry designed for maximum ground clearance and hassle-free install
  • Limited lifetime warranty

Hooker 70501323-RHKR
Hooker 70501323-RHKR

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.