Tag: Charger

ST Suspensions (27327019): ST Adjustable Lowering Springs for 2011+ Dodge Challenger/Charger

David Ayers Leave a comment
Use This Post Clip for Email

Get low and go fast with ST adjustable lowering springs from ST Suspensions. Designed for 2011-and-up Dodge Challenger and Charger without electronic suspension (Monroe dampers), the 27327019 kit is an alternative to standard springs, allowing you to adjust the height of your car even after installation—which means you can dial in a height to match your wheel and tire combination. This modification will improve steering behavior and agility while perfectly complementing your OE dampers.

Features

  • For 2011+ Dodge Challenger/Charger without electronic suspension (Monroe dampers)
  • Adjust ride height even after installation
  • Dial in height to match custom wheel and tire combinations
  • Improves steering behavior and agility
  • Matches OE dampers
ST Suspensions Adjustable Lowering Springs for 2011 Challenger_Charger 27327019

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (817845): Cat-Back 409S Outlaw Exhaust Kit for ’17-’18 Dodge Charger R/T and Daytona with 5.7L Engine

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking for aggressive exterior and interior sound for your 2017–2018 Dodge Charger R/T or Daytona with 5.7L engine, the Outlaw cat-back exhaust system is your pick. Perfect for drivers unafraid of the extra attention this system is sure to draw, the Flowmaster 817845 kit features 3” 409 stainless steel, mandrel-bent tubing; a pair of race-inspired Outlaw Series mufflers; and a 3” Scavenger Series X-pipe for maximum performance. The tailpipes include active exhaust valves and are finished with 4” stainless steel tips that exit the factory exhaust cutouts.

Designed for an easy fit, this Flowmaster system includes all necessary parts, hardware, and installation instructions. Manufactured in the USA.

Features

  • For 2017–2018 Dodge Charger R/T and Daytona with 5.7L engine and standard bumper cutout.
  • Dyno-tuned for maximum performance.
  • 409 stainless steel construction.
  • Easy installation.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster Cat Back 409S Exhaust Kit for Charger RT and Daytona 817845

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (SA404): CarTech’s “New Hemi Engines 2003 to Present: How to Build Max Performance”

David Ayers Leave a comment
Use This Post Clip for Email

If you need to transform your new Hemi engine into an even more responsive and faster power plant, New Hemi Engines 2003 to Present: How to Build Max Performance from CarTech has arrived to show you everything you need to know to build the engine to suit all your high-performance needs.

Veteran author and Mopar engine expert Larry Shepherd reveals current modification techniques and products you can use to take the most powerful pushrod V8 engine on the market today to another level. Covered topics include superchargers, cams, intake manifold and fuel systems, exhaust and ignition systems, stock and forged crankshafts, high-lift flow characteristics, aftermarket heads, and I- and H-beam connecting rods that will help you choose the best rotating assembly for your project.

New Hemi Engines 2003 to Present: How to Build Max Performance (SA404) from CarTech teaches you how to get everything you want out of your third-generation Hemi.

Pages: 144
Size: 8.5” x 11”
Format: Paperback
Illustrations: 334 color

CarTech New Hemi Engines 2003 to Present How to Build Max Performance

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (69-2553TTK): Typhoon Air Intake for Dodge Challenger/Charger SRT Hellcat

David Ayers Leave a comment
Use This Post Clip for Email

The K&N Typhoon air intake system is a complete air induction system replacement for some Dodge Challenger/Charger SRT Hellcat models. The Typhoon dramatically reduces air flow restriction for more usable power and acceleration throughout the RPM range, while the oversized conical filter can be used for up to 100,000 miles before servicing (depending on driving conditions).

The 69-2553TTK intake comes with a chrome-topped K&N high-flow air filter, mandrel-bent aluminum tube, and heat shield. The black powder-coated tube accommodates the factory intake air temperature sensor and crank case vent hose.

Note: Check your vehicle application for specific CARB status.

Features

  • Guaranteed to increase horsepower.
  • Improves throttle response and engine sound.
  • Free-flowing aluminum tube.
  • Filter lasts up to 100,000 miles before service is required.
  • Replaces entire factory air intake system.
  • Washable, reusable lifetime air filter.
  • Warranty: K&N Million Mile Limited.

K&N Typhoon Air Intake for Dodge Challenger or Charger

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717778): FlowFX Cat-Back Exhaust System for 2017 Charger R/T

David Ayers Leave a comment
Use This Post Clip for Email

The 717778 FlowFX cat-back exhaust system for 2017 Dodge Charger R/T with 5.6 V8 Hemi produces an aggressive exterior and interior sound level with all of the performance benefits you expect from Flowmaster. New features include bright 409S stainless steel tubing; a pair of Flowmaster’s new FlowFX straight-through mufflers with a large 3.00 inch core for maximum performance; and a deep, aggressive sound.

Flowmaster’s system uses a 3.00 inch Scavenger X-pipe cross-over and mandrel-bent tubing for maximum performance. It’s then finished off with 3.00 inch stainless steel tips that exit within the factory exhaust tips in the rear bumper valance. The two-piece tailpipes are designed to reuse the factory exhaust valves.

Features

  • Straight-through performance mufflers and sound.
  • Bright 409s stainless steel tubing and mufflers.
  • Scavenger X-pipe cross-over.
  • Reuses factory exhaust valves.
  • Includes all necessary parts, hardware, and instructions.
  • Made in the USA.
  • Warranty: lifetime limited.

Flowmaster FlowFX Cat Back Exhaust for 2017 Charger 717778

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Auto Meter (BEX-1500): Battery Extender

David Ayers Leave a comment
Use This Post Clip for Email

The BEX series of chargers from Auto Meter is fully equipped with sophisticated circuitry that safely charges and maintains batteries without overcharging. Charging lights will tell you what phase of charging your battery is currently undergoing:

  • Amber: desulfation mode
  • Red: charging
  • Green: maintenance at full charge

Because batteries not kept at full charge can become sulfated, the Battery Extender will keep your battery at full charge on a continuous basis in order to maximize battery life.

  • Compatible with all lead acid batteries: standard (flooded), AGM, and gel cell.
  • Offers parasitic drain protection and water resistance.
  • Fully automatic “smart” charging with advanced circuitry for safe and efficient charging.
  • No need to remove your battery: just take the charger to the source and connect the leads.
  • Spark-free connection and reverse polarity protection.
  • Compact, rugged composite shell.
  • Includes two sets of leads.
  • Backed by a 3-year warranty.

Auto Meter (BEX-1500): Battery Extender
Auto Meter (BEX-1500): Battery Extender

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (71-2545): Blackhawk Induction Air Intake System

David Ayers Leave a comment
Use This Post Clip for Email

The K&N 71-2545 Blackhawk Induction Air Intake System for the 2011-2016 Challenger/Charger/300 6.4L is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low-restriction system allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This product comes with black components including a K&N high-flow air filter and heat shield. The tube features an attractive, textured, black powder-coated finish and an engraved K&N plate welded on–creating a clean, high-performance look under the hood. The intake tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone-shaped air filter is made from an oil-free synthetic filter medium that can be used for up to 100,000 miles before cleaning is needed, depending on driving conditions. This air intake is relatively easy to install, usually only 90 minutes or less using existing factory mounting points and commonly available tools.

Note: Cannot be sold in California and not legal for use in California or other states adopting California emission standards.

K&N 71-2545
K&N 71-2545

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (SA327): Mopar B-Body Restoration 1966-1970

David Ayers Leave a comment
Use This Post Clip for Email

Chrysler B-Bodies from 1966 to 1970 are the most-restored cars in the franchise’s storied history. Popular models among them include the Charger, Coronet, GTX, Road Runner, and Super Bee. Restoring a Mopar B-Body is easier than ever with numerous of available aftermarket parts suppliers. This book offers an in-depth resource for restoring a Mopar B-Body. Step-by-step processes walk you through the tasks of metal repair, suspension rebuild, driveline verification, interior restoration, and more. All components are addressed, creating the most complete resource in the marketplace. With multiple step-by-step procedures and more than 400 color photographs, this is the most complete hands-on book ever written covering these coveted Chryslers. This will be your primary resource when it’s time to tackle a full restoration or complete a simple repair.

SA Design SA327
SA Design SA327

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (69-2550TTK): 2015 Dodge Charger Hellcat Typhoon Intake

David Ayers Leave a comment
Use This Post Clip for Email

The K&N 69-2550TTK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Challenger/Charger SRT Hellcat models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake, which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air, and more air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound by producing more aggressive, deeper acoustics during acceleration. The 69-2550TTK air intake comes with a chrome-topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that’s made to last, and it accommodates the factory mass air sensor and crank case vent hose.

Not legal for sale or use on any pollution-controlled vehicle in California.

K&N_69-2550TTK
K&N_69-2550TTK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

OPTIMA (150-40008): Digital 400 Charger/Maintainer

David Ayers Leave a comment
Use This Post Clip for Email

OPTIMA’s Digital 400 12V Performance Maintainer and Battery Charger automatically maximizes battery life and performance with a built-in battery health mode. It also offers a hybrid LED battery charging gauge with LCD screen and a quick-set battery type selection for easy operation. And because it recovers discharged batteries that others cannot, this maintainer is a must have in your garage.

OPTIMA_150-40008
OPTIMA_150-40008

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.