Tag: Dodge Challenger

K&N (71-1542) 2020 Dodge Challenger 5.7L V8 Gas Except Shaker Hood

David Ayers Leave a comment
Use This Post Clip for Email

The Blackhawk Induction™ air intake system from K&N for the 2020 Dodge Challenger 5.7L V8 features an oil-free synthetic filter media providing increased airflow and engine protection. This system has a black powder-coated aluminum intake tube and all black components for a seamless look.

The DRYFLOW® synthetic filter featured in this air intake system also has a steel heat shield helping to protect intake air from the high temperatures of your engine bay.

  • Powder-coated aluminum intake tube paired with DRYFLOW® synthetic air filter
  • Provides high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles (under normal highway driving conditions)
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717716): Cat-Back FlowFX Kit for 15’-16’ Challenger R/T 5.7L V8

David Ayers Leave a comment
Use This Post Clip for Email

The new 717716 FlowFX cat-back exhaust system for 2015–2016 Dodge Challenger R/T with 5.7L V8 is the perfect choice to create aggressive exterior and interior tones with all of the performance benefits you’ve come to expect from Flowmaster.

New features include bright 409 stainless steel tubing, two of Flowmaster’s new FlowFX straight-through mufflers with large 3” core, 2.5” Scavenger X-Pipe cross-over, and 2.5” stainless steel tips that exit from the rear bumper valance.

This exhaust system is manufactured in America and covered by the Flowmaster lifetime limited warranty.

Features

  • For 2015–2016 Dodge Challenger R/T with 5.7L V8.
  • Mandrel-bent 490S tubing.
  • Scavenger X-Pipe crossover.
  • Dyno tuned for maximum performance.
  • Includes all required parts and hardware, plus instructions.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster FlowFX Exhaust Kit for Dodge Challenger RT 5.7 V8

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

DiabloSport: Performance Tuning for ’15–’16 5.7L & 6.4L Challenger, Charger, and 300

David Ayers Leave a comment
Use This Post Clip for Email

As the industry leader in Hemi tuning, DiabloSport gives you the best when it comes to your Mopar. Proven on the dyno and on the street, the company’s tunes for 93 octane make your car drive like a dream, with gains of 15 hp and 20 torque on stock vehicles! If you have modified your ride, DiabloSport’s inTune i2 and Trinity tuners let you adjust key vehicle parameters on your Hemi: calibrate the speedometer for larger tires and gears; adjust idle rpm; dial in your throttle response with “throttle booster technology”; even modify performance parameters like timing, fueling, and idle.

The Trinity and inTune i2 tuners from DiabloSport provide a massive power boost to your 2015–2016 5.7L or 6.4L Chrysler 300, Dodge Charger, or Dodge Challenger…in less than an hour’s worth of your time!

Note: To unlock your car’s potential, you will need a Diablo-modified PCM that you can swap with your existing factory computer by just unscrewing a few bolts. You can purchase one of these PCMs from DiabloSport, or you can send in your PCM to the company for unlock service. Once you’ve installed the Diablo-modified PCM, you can tune your car for any combination of aftermarket performance mods or add power to your stock vehicle.

  • See gains of 15 horsepower and 20 torque on stock.
  • Performance tune your ’15–’16 Chrysler 300 and Dodge Charger or Challenger.
  • Requires a Diablo-modified PCM for tuning capability.
  • Tune with Trinity or inTune i2.

DiabloSport: Performance Tuning for ’15–’16 5.7L & 6.4L Challenger, Charger, and 300
DiabloSport: Performance Tuning for ’15–’16 5.7L & 6.4L Challenger, Charger, and 300

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – K&N

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, K&N’s very own Bert Heck goes over their new cold air intakes for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – Flaming River

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Flaming River’s very own Brett Domin goes over some of their new rack and pinion kits for 2016. Be on the lookout for more videos from this series over the coming weeks.

Ready to buy or have questions? Find your local Parts Pro Performance Center here: http://partspro.com/cms/store-locator/

Want to subscribe? Click here: http://bit.ly/21cab1e

Check out Parts Pro on Facebook: https://www.facebook.com/PartsProCenters

Want to check out more about Flaming River? http://partspro.com/cms/manufacturer/50/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.