Tag: Dodge

MSD Performance: Blaster Coils for Late-Model Chrysler V6

David Ayers Leave a comment
Use This Post Clip for Email

When it’s time to tune-up your late-model Dodge, Chrysler, or Jeep, trust the ignition experts at MSD Performance to upgrade your factory coils. Available in Red and Black, these high-quality, direct-replacement coils bolt directly into factory locations and plug in to factory wiring for a seamless installation. Whether cruising, racing, or hitting the trails, MSD blaster coils deliver ignition performance to pound pavement or kick up dust.

Features

  • Reliable, direct bolt-in replacement.
  • Plug in to factory wiring.
  • Available in Red or Black.
  • Sold individually or in pack of six.

MSD Performance Blaster Coils for Late-Model Chrysler V6

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717778): FlowFX Cat-Back Exhaust System for 2017 Charger R/T

David Ayers Leave a comment
Use This Post Clip for Email

The 717778 FlowFX cat-back exhaust system for 2017 Dodge Charger R/T with 5.6 V8 Hemi produces an aggressive exterior and interior sound level with all of the performance benefits you expect from Flowmaster. New features include bright 409S stainless steel tubing; a pair of Flowmaster’s new FlowFX straight-through mufflers with a large 3.00 inch core for maximum performance; and a deep, aggressive sound.

Flowmaster’s system uses a 3.00 inch Scavenger X-pipe cross-over and mandrel-bent tubing for maximum performance. It’s then finished off with 3.00 inch stainless steel tips that exit within the factory exhaust tips in the rear bumper valance. The two-piece tailpipes are designed to reuse the factory exhaust valves.

Features

  • Straight-through performance mufflers and sound.
  • Bright 409s stainless steel tubing and mufflers.
  • Scavenger X-pipe cross-over.
  • Reuses factory exhaust valves.
  • Includes all necessary parts, hardware, and instructions.
  • Made in the USA.
  • Warranty: lifetime limited.

Flowmaster FlowFX Cat Back Exhaust for 2017 Charger 717778

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (817760): Outlaw Cat-Back Exhaust System with Moderate/Aggressive Sound

David Ayers Leave a comment
Use This Post Clip for Email

Designed for Dodge applications with the factory Active Exhaust option, the 817760 Outlaw cat-back exhaust system from Flowmaster provides an aggressive, wide-open exterior sound level when hard on the gas and a moderate exterior/interior sound while cruising. This bolt-on 409S stainless steel system features a dual 3.00” Scavenger X-pipe assembly that runs into a pair of specially built Super 40 Series mufflers, uses 3.00” mandrel-bent tailpipes with built-in active exhaust valves, and is finished off with 3.50” quad stainless steel embossed tips. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Made in the USA!

Fits: 2015–2017 Dodge Challenger SRT 392 and R/T Scat Pack with 6.4L engine and SRT Hellcat with 6.2L engine.

Features

  • For factory Active Exhaust option.
  • Dyno-tuned for maximum performance.
  • Stainless steel construction.
  • Made in America.

Flowmaster Outlaw Cat Back Exhaust 817760

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Frostbite: High-Performance Fan/Shroud Packages for Frostbite Aluminum Radiators

David Ayers Leave a comment
Use This Post Clip for Email

High-horsepower street cars and trucks can take some effort to keep cool, and a proper cooling system is essential to maximizing your vehicle’s performance and longevity. Enter Frostbite’s high-performance fan and shroud packages for 2-, 3-, and 4-row Frostbite aluminum radiators, which can improve radiator efficiency and eliminate parasitic power drain from factory-style mechanical cooling fans.

Applications available for Dodge, Chrysler, Ford, GM, and Jeep.

Features

  • Aircraft-quality aluminum shrouds custom made to fit specific Frostbite
  • Several fan configuration available based on CFM draw and optimal shroud coverage.
  • Packages have lower-profile, higher-CFM performance SPAL fans.

Frostbite Fan_Shroud Packages

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6130010): Stage One Spring Kit for ’11-’16 Challenger R/T & SRT8

David Ayers Leave a comment
Use This Post Clip for Email

The Stage One Spring Kit from Hurst is a terrific way to firm up your car’s handling and give it that “just right” stance. These springs will lower your vehicle approximately 1 inch when installed, closing up that fender gap, lowering your car’s center of gravity for improved handling and braking, and enhancing overall driving feel—all while remaining street friendly thanks to its careful design and rate tailoring. Keep it firm; keep it low; keep it Hurst.

Features

  • High-performance handling.
  • Just-right stance for the perfect muscle-car look.
  • Daily-driver/street friendly.
  • Lower center of gravity (will lower your vehicle ~1”).
Hurst (6130010): Stage One Spring Kit for ’11-’16 Challenger R/T & SRT8
Hurst (6130010): Stage One Spring Kit for ’11-’16 Challenger R/T & SRT8

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger

David Ayers Leave a comment
Use This Post Clip for Email

With an upper stick crafted from high-strength steel, this billet aluminum shifter from Hurst reduces shift throw by more than 30% for your 2009-2016 Dodge Challenger with 6-speed transmission. Model applications include R/T, SRT8, SRT392, Scat Pack, and SRT Hellcat. Black anodized finish and backed by a limited lifetime warranty.

  • Six-speed manual for ’09–’16 Challenger.
  • Billet aluminum construction.
  • High-strength steel upper stick.
  • Reduces shift throw by over 30%.
  • Color: black.
  • Finish: anodized.
  • Limited lifetime warranty.
Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger
Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6350010): Elite Series Cat-Back Exhaust System for 2008-2014 Dodge Challenger SRT8

David Ayers Leave a comment
Use This Post Clip for Email

Hurst’s new Elite Series cat-back exhaust system for the 2008-2014 Dodge Challenger SRT8 with 6.1L or 6.4L V8 is constructed using the highest-quality materials and finest craftsmanship available today. Hurst Elite Series systems feature fully mandrel-bent 304s stainless steel tubing that has been custom-designed and exclusively manufactured by Flowmaster to ensure a precise fit every time! Hurst engineers then added an X-pipe crossover, which provides maximum scavenging, sound, and performance, and paired it with a set of fully polished 304s stainless steel Hurst mufflers. The mufflers use a high-thermal sound-absorption barrier with a large 3″ straight-through performance core that provides a deep, classic tone reminiscent of Hurst’s iconic heritage. The quad 3.5″ mirror-polished stainless steel tips, featuring laser-etched Hurst logos, finish off the system and put the world on notice that you’re serious about performance and style. Every Hurst Elite Series cat-back exhaust system is hand fabricated in the USA and backed by a Lifetime Limited Warranty.

HURST_6350010
HURST_6350010

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PRW: High-Performance Sportsman Dampers

David Ayers Leave a comment
Use This Post Clip for Email

PRW High Performance Sportsman Dampers combine top quality and reasonable pricing to set new standards for the industry. Cast from nodular iron, these dampers are suitable for engines generating up to 400 horsepower. Unlike most OEM dampers, the hub and ring are splined to prevent radial movement of the outer ring. Although they are not SFI certified, these dampers are 30% stronger than OEM dampers made from gray iron. Grab your own and see what all the excitement is about!

PRW 2339640
PRW 2339640

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edge Products: Juice with Attitude CTS2

David Ayers Leave a comment
Use This Post Clip for Email

Edge Products continues to revolutionize the performance tuning industry with the all-new CTS2. The CTS2 features all of the power and abilities of the previous CTS but with a slim, sleek new case design; a full-color, higher-resolution, 5-inch swipe screen; multiple gauge screen layouts; and fully customizable backgrounds and gauge colors. One-touch, easy menu navigation enables powerful performance tuning, vehicle control, and gauge monitoring.

Edge_EvolutionCTS2_1
Edge Juice with Attitude CTS2

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.