Tag: Flex-A-Lite

Flex-A-Lite: Wave Electric Fans

David Ayers Leave a comment
Use This Post Clip for Email

Producing 25% more airflow than comparable electric fans from other companies, the all-new Wave electric fan from Flex-A-Lite is also quieter and more efficient than traditional S- and straight-blade designs. The Flex-A-Lite team was able to engineer these benefits by using advanced computational fluid dynamics software to create the most aerodynamic profile possible and then testing it in a wind tunnel to verify results.

The performance is in the innovation. The newly engineered sine wave–shaped blade creates channels for the air to move along and reduces air vortices, while variations in the trailing edge reduce wind noise.

Three Sizes Available

  • P/N 236: 16” x 16.5” x 3.75” with 2,660 CFM
  • P/N 234:25” x 14.75” x 3.5” with 1,900 CFM
  • P/N 232: 12” x 13” x 3.5” with 1,325 CFM

Producing 25% more airflow than comparable electric fans from other companies, the all-new Wave electric fan from Flex-A-Lite is also quieter and more efficient than traditional S- and straight-blade designs. The Flex-A-Lite team was able to engineer these benefits by using advanced computational fluid dynamics software to create the most aerodynamic profile possible and then testing it in a wind tunnel to verify results. The performance is in the innovation. The newly engineered sine wave–shaped blade creates channels for the air to move along and reduces air vortices, while variations in the trailing edge reduce wind noise. Three Sizes Available • P/N 236: 16” x 16.5” x 3.75” with 2,660 CFM • P/N 234: 14.25” x 14.75” x 3.5” with 1,900 CFM • P/N 232: 12” x 13” x 3.5” with 1,325 CFM

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite: Direct-Fit Radiators for LS Engine Swaps

David Ayers Leave a comment
Use This Post Clip for Email

Flex-A-Lite is bringing us a new line of performance aluminum radiators designed just for LS engine swaps. These dual-pass, direct-fit radiators were engineered so that the 1.25” inlet and 1.5” outlet are on the passenger-side tank, which includes a 0.25” NPT bung for the steam port tube.

Flex-A-Lite gave these performance radiators a unique Extruded Tube Core technology, which increases contact area between coolant and the extruded tubes and provides a flat surface to braze the cooling fins to; combined, these characteristics allow for better heat rejection and cooling. Wind tunnel testing has shown that this Extruded Tube Core offers significant cooling efficiency over standard tube radiators.

Extruded Tube Core Features

  • Replaces multi-core radiators with an advanced design.
  • Increases contact area between coolant and the extruded tubes.
  • Provides a flat surface to braze the cooling fins to, maximizing contact between the tubes and fins.
  • Louver patterns better direct airflow.
  • Significantly stronger (100 PSI burst rating).
  • Corner subhead reinforces the cooling tube to header connection (an area prone to cracking and leaking in other brands of aluminum radiators).
  • Direct-fit applications bolt in without any drilling or cutting.
  • Available with and without a Flex-A-Lite electric fan installed at the factory.
  • Warranty: 2 years (transferable).

Flex-A-Lite Extruded Core Radiator for LS Swaps

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite: Extruded Core Radiator for ’07-’18 Jeep Wrangler JK

David Ayers Leave a comment
Use This Post Clip for Email

Extruded Core Technology from Flex-A-Lite is the future of performance aluminum radiators, replacing multi-core radiators with a new, advanced design. Extruded Core Radiators provide significantly better cooling with a stronger, more durable, and lighter design.

This direct-fit radiator is engineered to bolt into a 2007–2018 Jeep Wrangler JK—no cutting or drilling required. The radiator mounts using the factory location and equipment and includes a 22–24 lb. cap and train petcock.

Features

  • Increased contact area between coolant and aluminum tubes for better heat rejection.
  • Flat surface on which to braze the cooling fins maximizes contact between the tubes and fins for better cooling.
  • Louver patterns in the cooling fins direct airflow for better performance.
  • Wind-tunnel testing has shown significant cooling efficiency over standard tube radiators.
  • Enhanced strength (100 PSI burst rating).
  • Corner subhead reinforces the cooling tube to header connection (an area prone to cracking and leaking in aluminum radiators).
  • Warranty: 2-year transferable.

Flex-A-Lite Extruded Core Radiator for Jeep JK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite: New Transmission Coolers

David Ayers Leave a comment
Use This Post Clip for Email

Providing class-leading cooling for tough environments like racing and towing, Flex-A-Lite transmission coolers are also a great choice for daily drivers and Jeeps. Their patented dimpled plate and fin design improves cooling efficiency while also keeping the fluid mixed for better heat transfer.

In fact, Flex-A-Lite transmission coolers provide nearly double the heat transfer of typical low-cost coolers. The dimples also make the plates stronger: the coolers have a 500 PSI–rated burst strength. Their aluminum construction is lightweight yet extremely strong and durable.

Available in a variety of sizes. Can also be used as a power-steering cooler.

Features

  • All-aluminum construction for light weight and strength.
  • Great for daily drivers and racing/towing applications.
  • Patented dimpled plate and fin design.
  • Double the heat transfer of low-cost coolers.
  • 500 PSI burst strength.
  • Can also be used as a power steering cooler.

Flex-A-Lite Transmission Cooler_400017

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-a-lite: Dual 12-1/8” Low-Profile S-Blade Electric Fan with Variable Speed Controller

David Ayers Leave a comment
Use This Post Clip for Email

Boasting a low profile with minimal 2-5/8” depth, this dual 12-1/8” S-blade electric fan with variable speed controller and full shroud from Flex-a-lite moves 2,500 CFM of air, improving fuel economy and recovering horsepower when used to replace your stock clutch fan assembly.

Features

  • Two 12-1/8” S-blade electric fans.
  • Full shroud measures 26-1/4” x 15-1/2”.
  • Low-profile design.
  • 2,500 CFM airflow.
  • Variable speed controller.

Flex-a-lite Dual Lo-Profile S-Blade Electric Fan with VSC

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-a-lite: 1000 Airmover

David Ayers Leave a comment
Use This Post Clip for Email

The new 1000 Airmover from Flex-a-lite is essential for racers who need to cool their cars quickly between rounds. It is also useful in the garage when you need to clear the air or simply desire cooling air flow while you work.

The 1000 Airmover is lightweight and compact, making it easy to pack and handle. Its high-velocity performance clocks in at 900 CFM of focused airflow, letting you direct the air where you need it most. Its low 2-amp power draw means it won’t overtax generators or trailer circuits.

Manufactured from durable injection-molded plastic, the robust 1000 Airmover will last for many years of frequent use.

Features

  • High-velocity air stream.
  • Powerful and focused 900 CFM airflow.
  • Low power draw (2 amps).
  • Multiposition operation.

Flex-a-lite 1000 Airmover

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Parts Pro™ Vendor Showcase presents: Flex-a-Lite

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Parts Pro™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Matt Smith goes over what’s new for 2016.

Want to know more about Flex-a-Lite? Click here:
https://partspro.com/manufacturer/flex-a-lite

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-a-lite (640): Mojave Heater

David Ayers Leave a comment
Use This Post Clip for Email

The Mojave heater from Flex-a-lite® simplifies the task of providing up to 12,000 Btu of heat in your hot rod, off-road vehicle, or utility vehicle. Its compact size, ease of installation, and simple operation make it the ideal replacement unit. The design offers several mounting options and an optional plenum with adjustable louvers and a flange for defroster ducting. The Mojave gets it heat from the hot water in your vehicle’s cooling system (just like an OE heater), but has the advantage of fitting into a wide variety of tight spaces. The Mojave from Flex-a-lite is a compact and powerful heater that makes the job of adding or replacing a heater easy and affordable!

  • Small enough to mount under dash or seat
  • No need to locate hard-to-find OE heater parts
  • Unit measures only 10-1/8″ x 9″ x 5″
  • Moves 140 cfm
  • 12,000 Btu output

    Flex-a-Lite 640
    Flex-a-lite 640

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-a-lite®: 15-inch Black Magic Xtreme S-Blade Reversible Electric Fan

David Ayers Leave a comment
Use This Post Clip for Email

Flex-a-lite® 15-inch Black Magic Xtreme S-Blade reversible electric fans feature 3,300 cfm of airflow. Replacing a belt-driven fan with one of these powerful electric fans can recover engine power and increase fuel economy. These fans feature a durable injection-molded shroud to draw air through a 21.5″ x 17.5″ area. The S-Blade fan design with continuous outer ring provides quiet and efficient operation.

  • One-piece shroud is made from rugged nylon
  • Reversible for use as a pusher or puller
  • Adjustable thermostat with A/C relay
Flex-A-Lite_180
Flex-a-lite_180

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.