Tag: headers

Hooker: Stainless Steel Shorty Headers for ’09-’15 Cadillac CTS-V

David Ayers Leave a comment
Use This Post Clip for Email

Hooker has expanded its BlackHeart line of exhaust products with these 304 stainless steel shorty headers for 2009–2015 Cadillac CTS-V vehicles. They feature 1-7/8” primary tubes and are engineered to offer both premium fitment and maximum performance for your 6.2L engine.

Features

  • Max dyno gains of 18.85 HP and 20.49 ft. lb. torque.
  • True mitered merge collectors maximize exhaust velocity and scavenging while reducing unwanted turbulence.
  • 1-7/8” lightweight, 18-gauge, mandrel-bent, 304 stainless steel.
  • 3/8” thick, 304 stainless steel flanges for durability and an optimum sealing surface.
  • Retains factory O2 sensors and catalytic converters.
  • 100% hand-welded construction for strength, longevity, and good looks.
  • 100% bolt-on with no modifications necessary.
  • Tube geometry designed for a hassle-free installation.
  • All hardware included.
  • Warranty: limited lifetime.

Hooker Stainless Steel Shorty Headers for Cadillac CTS-V 70301316-RHKR

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: GM A-Body Headers for ’64-’67 Big-Block Chevy

David Ayers Leave a comment
Use This Post Clip for Email

Offering excellent ground clearance and awesome horsepower, big-block GM A-Body headers from Hedman Hedders are the only mid-length headers for 1964–1967 Chevrolet Chevelle, El Camino, and GTO. The advantage these headers have is that they don’t hang below the frame rails like the long-tube headers for those vehicles, sparing them from road hazards like bumps and driveways. They fit automatic transmission–equipped models and are compatible with A/C and power steering. The shorter, mid-length headers provide superb ground clearance—especially for lowered, pro-touring style builds—yet offer superior performance over short-tube headers or factory manifolds.

Hedman makes these headers in the USA from mandrel-bent, 1-3/4” primary tubes, with 3/8” header flanges and a 3” ball/socket-style gasket-free collector. The larger, free-flowing tubes improve exhaust scavenging to produce excellent horsepower and throttle response from your Rat motor. Hedman backs header construction with a lifetime warranty, and all factory-applied finishes are warrantied for five full years. Available finishes include HTC polished silver ceramic (68666), Black Maxx ceramic-metallic (68663), or uncoated (68660).

Features

  • For 1964–1967 GM A-Body.
  • Excellent ground clearance and terrific horsepower.
  • Compatible with automatic transmission, air conditioning, and power steering.
  • Mandrel-bent 1.75” primary tubes.
  • Includes gaskets, header/collector bolts, and bolt-on header collector adapters.
  • Made in the USA.
  • Warranty: lifetime (construction), 5 years (finish).

Hedman Hedders GM A-Body Headers for 64-67 BBC

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech: LS Swap Long-Tube Headers for ’82-’93 Chevy S-10 2WD

David Ayers Leave a comment
Use This Post Clip for Email

Developed specifically for two-wheel-drive 1982–1993 Chevy S-10 pickups powered by LS engines, these Flowtech long-tube headers are available in five different versions: painted, ceramic-coated, natural-finish 304 stainless steel, natural-finish 409 stainless steel, and polished 304 stainless steel. They come complete with gaskets and hardware and feature 1-3/4” mandrel-bent primary tubes, long-transition 3” collectors for increased exhaust velocity, and 3/8” thick header flanges for maximum strength and sealing.

Features

  • For GM LS engine swaps into 1982–1993 Chevy S-10 2WD trucks.
  • 1-3/4” mandrel-bent primary tubes and long-transition 3” collectors.
  • 3/8” thick header flanges for strength and maximum sealing surface.
  • Available in painted or ceramic-coated mild steel, natural 409 stainless steel, or polished 304 stainless steel.
  • Gaskets and hardware included.

Flowtech LS Swap Long Tube Headers for Chevy S-10

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker: Street Stock Circle Track Headers for Small-Block Chevy

David Ayers Leave a comment
Use This Post Clip for Email

The RacingHeart line of headers from Hooker just got a boost from new small-block Chevy (SBC) street stock headers for 1973–1988 GM G-Body and 1970–1981 GM F-body. Available in three sizes (1-5/8” x 3”, 1-3/4” x 3”, and 1-3/4” x 3-1/2”) and two finishes (Natural Stainless and Black Painted Mild Steel), you’re sure to find the right look and fit for your SBC application.

Features

  • Fits 1973–1988 Monte Carlo, Malibu, Regal, Cutlass, and Grand Prix.
  • Fits 1970–1981 Camaro and Firebird.
  • Collectors with merge spears for increased exhaust velocity.
  • 3/8” thick header flanges for strength and maximum sealing surface.
  • Fits straight and angle plug heads.
  • For use with short oil filter.
  • 3 sizes: 1-5/8” x 3”, 1-3/4” x 3” & 1-3/4” x 3-1/2”.
  • 2 finishes: Natural 409 Stainless Steel and Black Painted Mild Steel.

Hooker Street Stock Circle Track Headers for Small-Block Chevy

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: Hedman Hedders HTC Coated Shorty Hedders

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the HTC Coated Shorty Hedders from Hedman Hedders on 1967 Shelby GT 350.

Parts used in this video:

HTC Coated Shorty Hedders (88656)

Proform Wedge-Locking Header Bolts (66756)

Proform Wedge-Locking Collector Bolts (66757)

Want to check out more about Hedman Hedders?
https://partspro.com/manufacturer/hedman-hedders

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: Uncoated LS Swap Headers for ’67-’68 Chevy C10/20 Trucks & SUVs

David Ayers Leave a comment
Use This Post Clip for Email

With decades of experience manufacturing long and mid-length tube headers for Chevy and GMC, it’s no surprise that Hedman Hedders has designed this good-fitting, great-performing set of headers for the popular LS engine swap for 1967–1968 Chevy C10 and C20 SUVs and pickups. Each set uses smooth-flowing, CNC–mandrel bent tubes that are hand welded to ensure each pair is identical to the next. The stout 3/8” header flanges produce a great seal that resists warping, while Hedman’s unique, gasketless ball-and-socket collector design allows your exhaust system to bolt up—even if it is not perfectly aligned with the header collectors. Hedman Hedders backs these headers with a limited lifetime warranty.

Features

  • For LS swaps for 1967–1968 Chevy C10 and C20 SUVs and pickups.
  • Hand-welded, mandrel-bent tubes.
  • 3/8” header flanges.
  • Gasketless ball-and-socket collector design.
  • Warranty: limited lifetime.

Hedman Hedders Uncoated LS Swap Headers for 67-68 Chevy C10 and C20

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: Header Flanges for Small-Block Chevy 265-400

David Ayers Leave a comment
Use This Post Clip for Email

Hedman Hedders header flanges meet the same rigid quality-assurance standards as the flanges used to produce Hedman’s ready-to-bolt-on headers, ensuring that the fruits of your hard work will last for years to come. Their mild steel construction is easy to work with, and they come with 1-5/8” starter stubs (29210) or without (29200).

Features

  • Precision laser-cut flanges.
  • Mild steel construction.
  • Sold in pairs.
  • Available with or without welding stubs.

Hedman Hedders Flanges

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker: Exhaust Manifolds for GM LS

David Ayers Leave a comment
Use This Post Clip for Email

Now available with 2.5” outlets, these LS exhaust manifolds from Hooker offer improved flow and hug the engine block to be suitable for a variety of replacement and engine-swap applications. Their contoured design shunts the exhaust directly to the exit port for improved flow, while the cast-iron construction offers years of leak-free performance—with less under-hood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance.

Five finishes available: Natural Cast (8502HKR), Silver Ceramic (8502-1HKR), Black Ceramic (8502-3HKR), Titanium Ceramic (8502-4HKR), and Cast Iron Gray Ceramic (8502-5HKR).

Features

  • For GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired.
  • 5” outlet diameter for improved flow.
  • Nickel-plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included.
  • High-silicon/moly ductile iron for durability and corrosion resistance.
  • Tight tuck design fits most popular chassis and offers a clean muscle car appearance.
  • Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans.
  • Five finishes: as-cast or four colored ceramic coatings.

Hooker LS Exhaust Manifolds

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: Tight Tubes Street Rod Headers

David Ayers Leave a comment
Use This Post Clip for Email

Four-into-one Tight Tubes street rod headers from Hedman Hedders leverage an innovative collector to tuck the header tubes and hook-ups against the engine block for more component clearance than ordinary street rod headers. The larger-volume collector design offers exhaust flow that surpasses standard block hugger designs. Part numbers available for Chevy (283-400 & 396-502 engines) and Chrysler/Dodge (318-360 & 392 Hemi engines).

Features

  • Lowest profile headers available.
  • Work where ordinary headers won’t fit.
  • Patented collector produces more power than standard block huggers.

Hedman Hedders Tight Tubes Street Rod Headers

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders (69030): Easier-to-Install Long-Tube Headers for S-10 Small Block V8

David Ayers Leave a comment
Use This Post Clip for Email

What makes Hedman Hedders’ new long-tube headers for S-10 small-block V8 special? They have a one-piece, in-frame design that facilitates installation, unlike many other competing products.

These provide higher performance than cast manifolds or short-tube headers. They feature 16-gauge mild-steel primary tubes, stout 3/8” flanges, and Hedman’s gasket-less ball/socket-style collector. You can get these tubes uncoated, in polished silver, and in satin-black ceramic-metallic coated (Black Maxx) to fit the overall look and feel of your ride.

The 69030 gives users another high-performance header option from Hedman, one that offers more torque for stroker applications, particularly in high-RPM WOT situations.

Features

  • For S-10/S-15 small-block V8.
  • One-piece, in-frame design for an easier installation.
  • 16-gauge mild steel.
  • Three finishes available.

Hedman Hedders Long Tube Headers for S-10

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.