Tag: r/t

Hooker BlackHeart: Cat-Back Exhaust with Mufflers for ’15-’16 Challenger R/T 5.7L

David Ayers Leave a comment
Use This Post Clip for Email

The 70502327-RHKR 3” cat-back exhaust system with mufflers offers premium fitment and maximum performance for your 2015–2016 Dodge Challenger R/T’s 5.7L engine. This Hooker BlackHeart kit makes max dyno gains of 13.1 HP and 14.9 ft. lb. of torque.

This 3” system is constructed from lightweight, 18-gauge, mandrel-bent 304 stainless steel that offers up to a 39% weight savings (29 lb.) over the R/T’s OE exhaust. Includes straight-through mufflers, calibrated H-pipe design for reduced resonance and a deep muscle car sound, hand-welded details, and all necessary hardware. Retains factory tips and mounting points for a clean OE appearance and factory-like fitment.

Features

  • For 2015–2016 Dodge Challenger R/T with 5.7L engine.
  • Max dyno gains of 13.1 HP and 14.9 ft. lb. torque.
  • Up to 39% weight savings over OE exhaust (~29 lb.).
  • 3” lightweight, 18-gauge, mandrel bent, 304 stainless steel.
  • Dual high-flow, straight-through, 304 stainless steel mufflers.
  • Uses factory tips for a clean OEM appearance.
  • Calibrated H-pipe design for reduced interior resonance and a deep muscle car sound.
  • 100% hand-welded construction for strength, longevity, and good looks.
  • Uses OEM mounting points for factory-like fitment.
  • Tube geometry designed for maximum clearance and hassle-free installation.
  • All hardware included.
  • Warranty: limited lifetime.

Hooker BlackHeart Cat Back Exhaust System with Mufflers for Dodge Challenger RT

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (817845): Cat-Back 409S Outlaw Exhaust Kit for ’17-’18 Dodge Charger R/T and Daytona with 5.7L Engine

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking for aggressive exterior and interior sound for your 2017–2018 Dodge Charger R/T or Daytona with 5.7L engine, the Outlaw cat-back exhaust system is your pick. Perfect for drivers unafraid of the extra attention this system is sure to draw, the Flowmaster 817845 kit features 3” 409 stainless steel, mandrel-bent tubing; a pair of race-inspired Outlaw Series mufflers; and a 3” Scavenger Series X-pipe for maximum performance. The tailpipes include active exhaust valves and are finished with 4” stainless steel tips that exit the factory exhaust cutouts.

Designed for an easy fit, this Flowmaster system includes all necessary parts, hardware, and installation instructions. Manufactured in the USA.

Features

  • For 2017–2018 Dodge Charger R/T and Daytona with 5.7L engine and standard bumper cutout.
  • Dyno-tuned for maximum performance.
  • 409 stainless steel construction.
  • Easy installation.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster Cat Back 409S Exhaust Kit for Charger RT and Daytona 817845

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717778): FlowFX Cat-Back Exhaust System for 2017 Charger R/T

David Ayers Leave a comment
Use This Post Clip for Email

The 717778 FlowFX cat-back exhaust system for 2017 Dodge Charger R/T with 5.6 V8 Hemi produces an aggressive exterior and interior sound level with all of the performance benefits you expect from Flowmaster. New features include bright 409S stainless steel tubing; a pair of Flowmaster’s new FlowFX straight-through mufflers with a large 3.00 inch core for maximum performance; and a deep, aggressive sound.

Flowmaster’s system uses a 3.00 inch Scavenger X-pipe cross-over and mandrel-bent tubing for maximum performance. It’s then finished off with 3.00 inch stainless steel tips that exit within the factory exhaust tips in the rear bumper valance. The two-piece tailpipes are designed to reuse the factory exhaust valves.

Features

  • Straight-through performance mufflers and sound.
  • Bright 409s stainless steel tubing and mufflers.
  • Scavenger X-pipe cross-over.
  • Reuses factory exhaust valves.
  • Includes all necessary parts, hardware, and instructions.
  • Made in the USA.
  • Warranty: lifetime limited.

Flowmaster FlowFX Cat Back Exhaust for 2017 Charger 717778

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6130010): Stage One Spring Kit for ’11-’16 Challenger R/T & SRT8

David Ayers Leave a comment
Use This Post Clip for Email

The Stage One Spring Kit from Hurst is a terrific way to firm up your car’s handling and give it that “just right” stance. These springs will lower your vehicle approximately 1 inch when installed, closing up that fender gap, lowering your car’s center of gravity for improved handling and braking, and enhancing overall driving feel—all while remaining street friendly thanks to its careful design and rate tailoring. Keep it firm; keep it low; keep it Hurst.

Features

  • High-performance handling.
  • Just-right stance for the perfect muscle-car look.
  • Daily-driver/street friendly.
  • Lower center of gravity (will lower your vehicle ~1”).
Hurst (6130010): Stage One Spring Kit for ’11-’16 Challenger R/T & SRT8
Hurst (6130010): Stage One Spring Kit for ’11-’16 Challenger R/T & SRT8

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger

David Ayers Leave a comment
Use This Post Clip for Email

With an upper stick crafted from high-strength steel, this billet aluminum shifter from Hurst reduces shift throw by more than 30% for your 2009-2016 Dodge Challenger with 6-speed transmission. Model applications include R/T, SRT8, SRT392, Scat Pack, and SRT Hellcat. Black anodized finish and backed by a limited lifetime warranty.

  • Six-speed manual for ’09–’16 Challenger.
  • Billet aluminum construction.
  • High-strength steel upper stick.
  • Reduces shift throw by over 30%.
  • Color: black.
  • Finish: anodized.
  • Limited lifetime warranty.
Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger
Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.