2015 PRI Show – Painless Wiring

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Painless’ Wiring very own Derek Love goes over their new Trail Rocker, Track Rocker, and much more. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – Hedman Hedders

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Hedman Hedder’s very own Lee Robinson goes over some new diesel products they will be coming out with in 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – Energy Suspension

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Energy Suspension’s very own Michael Santa Cruz goes over their new suspension components for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – AIRAID

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, AIRAID’s very own Trent McGee goes over the new cold air intake applications they will be offering for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 Parts Pro Vendor Showcase presents: Taylor Cable

Welcome to the 2015 Parts Pro Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products. In this episode, Taylor Cable’s very own Mike Wymore goes over some of their new wiring solutions and even demonstrates the proper way to do an installation for their Universal Wires. Be on the look out for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro Performance Center to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 Parts Pro Vendor Showcase presents: Painless Performance

Welcome to the 2015 Parts Pro Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products. In this episode, Painless Performance’s very own Derek Love goes over their new Trail Rocker Control System for the Jeep Wrangler. Be on the look out for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro Performance Center to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N 63-2589 63 Series AirCharger Kit for 2015 Ford Mustang 2.3L

The K&N 63-2589 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-2589 air intake comes with a chrome-topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow-off valve. The oversized cone-shaped air filter can be used for up to 100,000 miles before servicing is needed, depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed horsepower gain
  • Designed to improve throttle response and engine sound
  • Free-flowing high density polyethylene tube
  • Replaces entire factory air intake system
  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty
K&N 63-2589
K&N 63-2589

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hypertech 32501 Max Energy Power Programmer for 2015 Corvette 6.2 LT1

Max Energy™…The Best Hand-Held Performance Tuner on the Market!

Max Energy Tuning extracts every bit of energy possible out of every molecule of fuel, giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, our engineers first optimize the spark and fuel curves point by point over the entire RPM band. With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter unlocking or transmission down-shifting. The results are maximum power and fuel mileage.

  • Optimized engine tuning for premium octane (+34 Hp, +19 Tq)
  • Lower or raise the top-speed limiter to match the speed rating of factory-approved high-performance tires
  • Speedometer/odometer correction for tire sizes from 24″-30″ & rear gear ratios from 2.56:1-5.13:1
  • Disable 1-4 skip shift (Corvette w/manual transmission)
  • Adjust rev limiter +/- 500 RPM in 100 RPM increments
  • Read, display & clear DTCs
Hypertech 32501
Hypertech 32501

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley 350/500 CFM Street Avenger 2bbl Carburetors

Holley Introduces 350/500cfm Street Avenger 2bbl Carburetors

Street Avenger carburetors are known to bolt on right out of the box, and Holley is excited to announce the addition of itsnew 2bbl Street Avenger models, available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations, three vacuum ports for all necessary vacuum accessories, factory preset electric choke for easy startups, built-in fuel filters, and an included 3/8” fuel line connection so there are no unnecessary trips back to the parts store.
Avenger carbs are the first to have a limited lifetime warranty. With a great warranty like that and the included comprehensive instruction manual, you can count on years of worry-free service.

  • Vibration polished for good looks
  • Optimized street calibration that works-out-of-the-box
  • Factory preset electric choke for easy startups (range identified and restricted for easy adjustments)
  • Built-in No Trouble fuel inlet filter
  • Street Avenger fuel metering system provides precise fuel control for great low-end torque and awesome acceleration
  • Ford A/T kick down (spring perch included)
  • Gen IV No Trouble power valve
  • Three vacuum ports (1 PCV/brake, 1 timed spark, 1 full)
  • Limited Lifetime Warranty – Guaranteed to be free from defects in material and workmanship for the life of the product!
  • 100% wet-flow tested by Holley technicians to ensure it arrives ready to run!

Applications:

0-80350: 350 CFM 2bbl Street Avenger (electric choke)

0-80500: 500 CFM 2bbl Street Avenger (electric choke)

 

Holley 0-80350
Holley 0-80350

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman 68670

Hedman’s Standard-Duty, Uncoated Headers are manufactured using 18-gauge, mandrel-bent primary tubes (some models built using thicker 16- or 14-gauge tubing) and 1/4 flanges (some models use 3/8″ flanges).

The factory black paint applied to uncoated headers is not hi-temp, and is for pre-installation protection only. For the ultimate in protection against the elements, we suggest Hedman’s Original HTC coating.

All Hedman street hedders are MADE IN THE USA and are backed by a lifetime warranty against manufacturing defects!

 

Applications:

Chevrolet Camaro 1967-1987 (CID: 305, 350, 302, 400, 283, 327)

Chevrolet Nova 1969-1979 (CID: 305, 350, 302, 283, 400, 327)

Chevrolet Chevy II 1968 (CID: 327, 350, 302, 400, 283, 305)

 

Hedman 68670
Hedman 68670

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.