Tag: vapor lock

Design Engineering, Inc. (010669): Vapor Lock™ Fuel Line Sleeve

David Ayers Leave a comment
Use This Post Clip for Email

The Vapor Lock™ fuel line sleeve from Design Engineering, Inc. prevents fuel and other fluids from boiling due to extreme heat and causing a vapor lock situation—along with the rough idling and difficult starting that accompany it. Made from glass fiber and polyester laminated to an aluminum outer layer, Vapor Lock™ fuel line sleeves (PN 010669) work by greatly reducing heat in the line to keep fuel cooler (340 degrees of direct heat resistance). Plus, thanks to its split design and adhesive flap, this DEI product installs easily without having to disconnect the fuel line.

Features

  • Use on fuel lines to prevent vapor lock
  • Or use on any cable, hose, or line for added heat protection
  • 5/8” (16 mm) interior diameter x 36”; easily cuts to size
  • Split design with adhesive flap
Design Engineering Inc Vapor Block Fuel Line Sleeve 010669

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

DEI (010383): Fuel Injector Reflective Heat Covers

David Ayers Leave a comment
Use This Post Clip for Email

In hot temperatures, both performance and factory fuel injectors can be at risk of vapor lock or heat soak, which can cause rough idle, slow starting, or other potential serious engine problems. DEI’s Fuel Injector Reflective Heat Covers (010383, 8 pack) solve this problem by reflecting both direct and radiant heat away from the injectors. Constructed of high-temperature-rated glass fiber bonded to a heat-reflective aluminized material, these DEI covers can be used on most engine configurations that use stock or aftermarket fuel injectors. Cooler fuel injectors will perform more efficiently, offering a more consistent throttle response.

Installation is a breeze, as the injectors do not have to be removed. The covers feature a split design, allowing them to wrap around each individual injector, and are secured with a sewn-in hook-and-loop fastening edge.

DEI_010383
DEI_010383

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.