PROFORM (67459): Engine Lift Plate for GM LS Gen IV

Made from quality steel and boasting three attachment points to create optimal tilt, the 67459 engine lift plate from PROFORM was designed to help you more easily hoist out GM LS Gen IV (2006–2016) engines. To install, just remove the intake manifold and valley tray cover and replace them with the lift plate using existing valley tray bolts (bolts not included). PROFORM also designed this product to serve as a valley cover for storage after the job is through.

Features

  • For GM LS Gen IV (2006–2016) engines
  • Quality steel construction with three hoist points for optimal tilt
  • Bolts to engine block with existing valley tray bolts (bolts not included)
  • Sold individually
PROFORM Engine Lift Plate for GM LS

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

NOCO Company (GB50): Boost XL 1,500-Amp UltraSafe Lithium Jump Starter

The Boost XL from NOCO Company is a portable power station for 12-volt batteries. This lightweight lithium-ion jump starter can get a dead battery back on its feet in seconds—up to 30 times on a single charge. Boost XL offers spark-proof, reverse-polarity protection, so it’s safe for anyone to use.

NOCO engineered more than just jump-starting power into the GB50 UltraSafe, too. It also includes a high-output, 200-lumen LED flashlight with seven modes that holds its charge up to a year and a USB battery pack for recharging personal devices on the go.

Suitable for gasoline engines up to 7 liters and diesel engines up to 4.5 liters (cars, vans, boats, lawn mowers, SUV, trucks, and more). Includes new HD Precision Boost Battery Clamps, USB charging cable, microfiber storage bag, lifetime customer support, and NOCO’s one-year, hassle-free limited warranty.

Features

  • For gas engines up to 7 liters and diesel engines up to 4.5 liters
  • Perfect for cars, trucks, SUVs, boats, motorcycles, lawn mowers, and more
  • Rated at 1,500 amps, with up to 30 jumps starts on a single charge
  • Ultra-safe, mistake-proof design (spark-proof and reverse-polarity protection)
  • HD Precision Boost Battery Clamps easily connect to any 12-volt lead-acid battery.
  • 200 lumen LED flashlight with seven modes (including SOS and emergency strobe)
  • Recharges personal devices and includes a USB charging cable
  • Hot and cold LED indicators protect batteries and devices.
NOCO Company Boost XL 1500 Amp UltraSafe Jump Starter GB50

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Bully Dog: Thruster Throttle Booster

Upgrade your vehicle’s throttle response with a Thruster throttle booster from Bully Dog. The Thruster easily installs inline between the pedal position sensor and vehicle harness. Make adjustments on the fly with the simple control knob to really feel the change as you drive. With its waterproof design, this product is ideal for off-road vehicles, but it is suitable for any vehicle looking for improved performance.

Bully Dog designed the Thruster throttle booster to be emissions and warranty safe. It is made in the USA, with CARB EOs for many applications.

Features

  • Improves throttle response on the fly via easy-to-use control knob
  • Reduced lag and increased acceleration
  • Easy to install inline between the pedal sensor and vehicle harness
  • Waterproof design ideal for off-road applications
  • CARB EOs available for many applications
Bully Dog Thruster Throttle Booster

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Racing Power Company (R5445BK): Fabricated Intake Manifold for SBC V8

Dial up horsepower and torque with a tunnel ram–style fabricated intake manifold from Racing Power Company. Finished in black, the R5445BK intake manifold fits most 1955–1986 small-block Chevy V8 cylinder heads with single four-barrel, square-bore carb and OE/stock deck height; it also works with OE/stock distributors. RPC fabricates this product from TIG-welded T-6061 aluminum with CNC-machined flanges and includes a new intake manifold gasket kit with purchase.

Also available in a clear anodized finish (PN R5445).

Note: Mounting hardware (PN R7531S – bolt kit) and water neck sold separately.

Features

  • For 1955–1986 small-block Chevy V8
  • Increases HP and torque
  • 2,200–6,800 rpm range
  • TIG-welded T-6061 aluminum
  • CNC-machined flanges
  • 7” overall height
  • Clears OE/stock distributors
  • Two 1/2” NPT coolant ports
  • One 3/8” NPT vacuum port (on plenum)
  • Includes intake manifold gasket kit
Racing Power Company Fabricated Intake Manifold for SBC V8 R5445BK

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

AutoMeter Products: FiTech CAN Gauges

FiTech CAN Gauges from AutoMeter Products are the perfect instrumentation solution for enthusiasts who have converted to FiTech EFT or trans controller systems. The three new gauges—tach, speedometer, and water temp—easily plug and play into FiTech’s CAN output and are built to match AutoMeter’s Sport-Comp II design theme, so you can mix with other gauges from that series for a professional and uniform look.

Features

  • For FiTech electronic fuel injection and trans controller systems
  • PN 880829: 3 3/8” tachometer, 0–140 mph (EFI and trans controller)
  • PN 880828: 3 3/8” speedometer, 0–8K rpm (trans controller only)
  • PN 880890: 2 1/16 water temperature, 100°–250°F (EFI only)
  • Direct plug-and-play connection
  • Match AutoMeter’s Sport-Comp II gauges for seamless series integration
  • Dimming function through FiTech’s control module
  • Through-the-dial white LED lighting with lit pointer
AutoMeter Products FiTech CAN Gauges

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Flaming River (FR313KTK): Power Rack & Pinion Cradle Kit for ’68-’72 Chevelle/El Camino

Reduced bump steer is the calling card of this power rack and pinion cradle kit from Flaming River, thanks to a unique TravelBar system that connects new tubular inner tie-rod ends to original pivot points. Aficionados of 1968–1972 Chevy Chevelle and El Camino will want to jump on this upgrade, as will owners of sister GM intermediates of the same period such as Pontiac GTO/Lemans, Oldsmobile 4-4-2/Cutlass, Buick GS/Skylark, and the GMC Conquistador.

Flaming River designed the FR313KTK rack and pinion cradle kit to install in the stock steering system mounting holes—no drilling, cutting, or welding required. This precision jig-welded setup comes with lifetime serviceability, a paintable tilt key column, Billet-Joint and column adapter, stronger 1” rack gear, wiring connector, mounting hardware, and more.

Features

  • For Chevrolet Chevelle/El Camino and other sister GM intermediates with SBC or BBC engines
  • All-new power rack and pinion with lifetime serviceability
  • Billet-Joint and column adapter
  • Stronger 1” rack gear
  • 6” travel and full turning radius
  • Paintable tilt key column
  • Mounting hardware, wiring connector, and universal joints
  • Power steering pump and pulley
  • Aluminum mounting reservoir (hoses sold separately)
  • Billet swivel floor mount
  • Bolts into existing chassis with no suspension modification
Flaming River Power Rack & Pinion Kit for Chevelle_El Camino

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Auburn Gear: High Performance Series Differentials

On the hunt for more traction, faster engagement, more controlled power transfer, and lightning-fast reaction to changing load conditions? High Performance Series differentials from Auburn Gear are an immediate upgrade to OE diffs, whether you want to upgrade your daily driver or weekend mud-churner.

Auburn Gear’s flagship diffs deliver smooth, torque-sensing operation with correct bias ratios to outperform the competition. Their unique cone-clutch design transfers more power to the high-traction wheel for quicker acceleration and tighter cornering—without compromising a vehicle’s performance requirements. High Performance Series differentials are backed by a one-year warranty, with an additional year’s warranty when used with Auburn Gear differential oil and friction modifier (sold separately). Made in the USA!

Features

  • Smooth, torque-sensing operation with correct bias ratios
  • Cone-clutch design transfers more power to the high-traction wheel for quicker acceleration and tighter cornering.
  • Maximum torque transfer without compromising a vehicle’s performance requirements
  • Made in the USA
  • Warranty: 1 year (2 years when used with Auburn Gear differential oil and friction modifier)
Auburn Gear High Performance Series Differential

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Racing Power Company (R3070): LS1 Rocker Arms with Trunion Upgrade

Designed to handle higher spring pressures and engine RPMs over stock, these LS1 rocker arms from Racing Power Company are forged from quality steel alloy and include caged roller bearings and 8620 steel trunions for superior durability and performance.

The R3070 LS1 rocker arms meet or exceed OE specifications and include one set of 16 rocker arms and new mounting bolts. This Racing Power Company kit is a 100% drop-in design for a hassle-free installation: just rotate the trunion with the flat recess facing up, then tighten bolts to 22 ft-lb following the factory procedure.

Note: Legal for off-road use and on non–pollution controlled vehicles (1965+); however, not tested or approved by CARB for highway vehicles in California.

Features

  • For LS1/LS2/LS6
  • Also fits LR4/LM7/L59/LM4/L33 Vortec 4.8./5.3/5.7/6.0
  • Straight intake rocker with 1.7 rocker ratio
  • 8620 steel-alloy trunion
  • 100% drop-in design
  • Fully caged roller bearings
Racing Power Company LS1 Rocker Arms R3070

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Belltech (34938): 2.5” Leveling Kit for ’19-’20 Ford Ranger

Want bigger, more aggressive tires on your 2019–2020 Ford Ranger? Belltech has done its level best when it comes to helping Ranger owners eliminate 2.5’ of front rake from their pickups. The 34938 kit offers an economical and simple way to create the clearance needed to install up to 31” aggressive off-road tires. Compatible with XL, XLT, and Lariat models.

Features

  • For 2019–2020 Ford Ranger
  • Eliminates 2.5” of front rake
  • Levels truck to allow for up to 31” aggressive off-road tires
  • Compatible with XL, XLT, and Lariat models
Belltech 2.5 Inch Leveling Kit for 19-20 Ford Ranger 34938

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Taylor Cable Products: ThunderVolt 50 Race Fit and Universal Wire Sets

Ignite your high performance aspirations with ThunderVolt 50 from Taylor Cable Products, the best .409”, 10.4 mm ignition wires on the market. ThunderVolt 50 wire is IROC dyno tested and track proven to achieve gains of 5 hp and 7 lb torque over the competition.

Compatible with most electronic ignition systems and components, Taylor’s 40 Ohm/ft Ferrite Spiral-Wound, low-resistance core provides optimal RFI and EMI suppression, while the tightly woven, heat-treated fiberglass braid eliminates the need for additional sleeving. Finally, the exclusive, three-layer ZIMPLEX silicone outer jacket provides heat and abrasion protection up to 600°F and 102,000 volts of dielectric strength—a must for the extreme conditions of open-wheel racing and under-hood temperatures.

Taylor offers ThunderVolt 50 wire sets in black with gold lettering.

Note: Compatible with most American-made vehicles, universal-fit sets will require cutting to fit.

Features

  • 10.4 mm ignition wire compatible with most electronic ignition systems/components
  • IROC dyno tested and track proven to provide +5 hp and +7 lb torque
  • 40 Ohm/ft Ferrite Spiral-Wound coated core
  • Tightly woven, heat-treated fiberglass braid eliminates the need for additional sleeving.
  • Three-layer ZIMPLEX silicone outer jacket protects against heat up to 600°F and 102,000 volts of dielectric strength.
  • Available in black with gold lettering
Taylor Cable Products ThunderVolt 50 Race Fit and Universal Wire Sets 98045

Ready to buy? Need help with the install? To find your nearest Parts Pro™ affiliate, see our Store Locator. Or join the conversation at the Parts Pro™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.