Category: Industry

FiTech (30004): Go EFI Power Adder 600 HP System

David Ayers Leave a comment
Use This Post Clip for Email

If you are an enthusiast who demands more from your system or if you’re planning a future upgrade, the Go EFI Power Adder 600-horsepower system from FiTech can give you 25 lb. of boost right out of the box and can be used in a blow-through turbo or blower application or on a single roots-style supercharger. You can also run a single stage of wet nitrous and control your A/F and ignition timing.

The 30004 FiTech Power Adder system has terrific self-tuning capabilities plus the extra PRO features needed for higher-output engines.

Compatible applications for Chevrolet, Pontiac, Ford, Chrysler, Dodge/Plymouth, and other engines making 200–600 HP with a four-barrel intake manifold.

Features

  • For engines making 200–600 HP with a four-barrel intake manifold.
  • 25 lb. boost right out of the box.
  • Self-tuning and PRO features for higher-output engines.

FiTech Go EFI Power Adder 600 HP System 30004

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Redhorse Performance: 900 Series Nitrous System Hose Assemblies

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from PTFE tubing and rugged stainless steel outer braids, 900 Series nitrous system hose assemblies from Redhorse Performance are hydraulically crimped to exacting standards to guarantee performance and safety.

All lines have straight female hose ends (-04AN or -06AN) on each side in Blue, Black, or Red; they are also available in various lengths to suit your application.

Features

  • PTFE tubing and stainless steel outer braids.
  • Hydraulically crimped for performance and safety.
  • -04AN or -06AN straight female ends on each side.
  • End colors: Blue, Black, or Red.

Redhorse Performance 900 Series Nitrous System Hose Assemblies

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Get a Free Air Cleaner with Performer or AVS2 Carb Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good November 1 to December 31. Click image for printable form and complete details!

 

Edelbrock Free Air Cleaner with AVS2 or Performer Carb Purchase

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: Get a $25 Card or a Free Hat with Air Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good November 1–30. Click image for printable form and complete details!

 

AIRAID $25 Card on Air Intake Systems

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SCT: Get Up to $50 Back on Select Tuners

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good November 1 to December 31. Click image for printable form and complete details!

 

SCT Get Up to $50 Back on Select Tuners

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Bully Dog: Get Up to $50 Back on Select Tuners

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good November 1 to December 31. Click image for printable form and complete details!

 

Bully Dog Get Up to $50 Back on Select Tuners

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite: Wave Electric Fans

David Ayers Leave a comment
Use This Post Clip for Email

Producing 25% more airflow than comparable electric fans from other companies, the all-new Wave electric fan from Flex-A-Lite is also quieter and more efficient than traditional S- and straight-blade designs. The Flex-A-Lite team was able to engineer these benefits by using advanced computational fluid dynamics software to create the most aerodynamic profile possible and then testing it in a wind tunnel to verify results.

The performance is in the innovation. The newly engineered sine wave–shaped blade creates channels for the air to move along and reduces air vortices, while variations in the trailing edge reduce wind noise.

Three Sizes Available

  • P/N 236: 16” x 16.5” x 3.75” with 2,660 CFM
  • P/N 234:25” x 14.75” x 3.5” with 1,900 CFM
  • P/N 232: 12” x 13” x 3.5” with 1,325 CFM

Producing 25% more airflow than comparable electric fans from other companies, the all-new Wave electric fan from Flex-A-Lite is also quieter and more efficient than traditional S- and straight-blade designs. The Flex-A-Lite team was able to engineer these benefits by using advanced computational fluid dynamics software to create the most aerodynamic profile possible and then testing it in a wind tunnel to verify results. The performance is in the innovation. The newly engineered sine wave–shaped blade creates channels for the air to move along and reduces air vortices, while variations in the trailing edge reduce wind noise. Three Sizes Available • P/N 236: 16” x 16.5” x 3.75” with 2,660 CFM • P/N 234: 14.25” x 14.75” x 3.5” with 1,900 CFM • P/N 232: 12” x 13” x 3.5” with 1,325 CFM

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc.: Heat Screen GOLD Metalized Matting

David Ayers Leave a comment
Use This Post Clip for Email

GOLD metalized radiant matting from DEI—made from high-temperature metalized polyimide film bonded to heat-treated glass fiber—can be installed almost anywhere in your vehicle to reduce the damaging effects of heat. GOLD metalized matting can reflect direct heat up to 800°F and radiant heat up to 1,100°F.

This DEI product can be used to cover air intake tubes, firewalls, over-transmission tunnels, air boxes, under the carpet, and around mufflers and catalytic converters. Non-automotive uses include marine, powersports, or wherever direct or radiant heat protection is desired.

GOLD metalized matting goes on mechanically or via adhesive spray (DEI 010490) and is available in two sizes: 24” x 24” (4 sq. ft.) and 36” x 40” (10 sq. ft.). Custom-cut lengths available by special order.

Features

  • For firewalls, bulkheads, engine covers, floors, seat bottoms, and more.
  • Handles continuous temperatures up to 850°F.
  • Resists UV degradation for long-term performance.
  • Adhesive protected by release liner rated up to 325°F.
  • 0065” thick.
  • Easy to apply and remove.

DEI GOLD Metalized Matting

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Silicone Lower Radiator Hose for 2015+ Ford Mustang GT

David Ayers Leave a comment
Use This Post Clip for Email

The MMHOSE-MUS8-15L lower radiator hose kit from Mishimoto upgrades your stock 2015 Mustang with advances in both style and reliability. The kit includes a four-piece silicone lower hose, CNC connector, and worm-gear clamps to ensure an easy installation. Unlike the degradation-prone stock 2015 Mustang rubber hoses, every Mishimoto silicone hose is constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Backed by Mishimoto’s lifetime warranty.

Available in Blue, Black, and Red.

Features

  • For 2015-and-up Ford Mustang GT.
  • Made from four layers of silicone reinforced with heat-resistant fibers.
  • Improves pressure and heat tolerance.
  • Kit includes lower radiator hose, oil-cooler lines, worm-gear clamps, and aluminum diverter pipe.
  • Colors: Black, Blue, and Red.
  • Warranty: lifetime.

Mishimoto Lower Radiator Hose Kit for 2015 and Up Ford Mustang GT MMHOSE-MUS8-15L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: Street Performance Shocks

David Ayers Leave a comment
Use This Post Clip for Email

With its Street Performance shocks, Belltech has addressed many of the issues that plague street performance vehicles, including underwhelming handling and performance of the factory McPherson struts and standard rear shocks. These products also allow you to adjust the ride height of your vehicle’s front end by up to 2” to level out the rake.

Premium ride quality was top of mind for Belltech engineers when they designed the Street Performance shocks. They focused on tuning low-speed compression characteristics to control pitch and roll, dive and squat. In addition, this product’s progressive rebound tuning complements large aftermarket wheels to keep your ride smooth, firm, and in control.

Features

  • Vehicle-specific applications.
  • Oversized construction for additional damping control.
  • 15mm piston rod, 35 mm piston, and 55 mm shock body.
  • Internal Teflon-coated bushings and piston seals avoid metal-to-metal contact and provide the lowest possible friction.
  • Increase handling and performance for maximum comfort.

Belltech Street Performance Shocks 9634

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.