Category: Industry

PROFORM (66978): Eight-Piece Aluminum AN Wrench Set

David Ayers Leave a comment
Use This Post Clip for Email

Color-coded, lightweight, and affordable AN hex wrench set from PROFORM is ideal for tightening valuable aluminum fittings without marring damage. Kit includes eight wrenches.

Features

  • 8-piece, color-coded set.
  • Includes sizes -3AN through -20AN.
  • Quality aluminum construction.

 

PROFORM Eight-Piece Aluminum AN Wrench Set

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AEM Water_Methanol Injection Systems

AEM: Water/Methanol Injection Kits for Forced-Induction Gas Engines

David Ayers Leave a comment
Use This Post Clip for Email

Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven way to reduce engine inlet air temperatures and suppress harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%.

AEM has two controller kits available that fit the bill: one boost-dependent version for vehicles up to 35 PSI (30-3300). This part number includes an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup. The second (30-3350) has a multiple input design that allows installation on ultra-high boost vehicles (above 35 PSI) using a 0–5-voltage-based external MAP sensor.

Features

  • For gas-powered race engines.
  • Water/methanol injection reduces engine inlet air temperatures.
  • Suppresses harmful detonation.
  • Increases boost and advance ignition timing (without high-octane fuel).
  • Two kits available: 30-3300 (up to 35 PSI) and 30-3350 (35+ PSI).

AEM Water_Methanol Injection Systems

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro Performance Centers™: Driven Racing Oil Analysis Kit

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro Performance Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we welcome Lake Speed, Jr. from Driven Racing Oil into the garage and he tells us about their Oil Analysis Kit.

Parts used and referenced in this video:

Oil Analysis Kit (DR100-21)

Want to check out more about Driven Racing Oil?
https://partspro.com/manufacturer/driven-racing-oil

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: $25 Rebate on AVS2 Carburetor Purchases

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer valid January 15 to January 30, 2018. Click image for printable form and complete details!

 

Edelbrock 25 Dollar Rebate on AVS2 Carb

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro Performance Centers™: Oil in Race Cars with Driven Racing Oil

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro Performance Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we welcome Lake Speed, Jr. from Driven Racing Oil back to the garage and we talk about what to look for in an oil for your racing application.

For more info on oil, check out these videos on the 5 Things You Need to Know about Oil:

Part 1: The Four R’s
https://www.youtube.com/watch?v=V1VSUuQZvos&t

Part 2: Balance is Best
https://www.youtube.com/watch?v=KA-vYCnz8l8

Part 3: Clean, Cool, & Dry
https://www.youtube.com/watch?v=GFjq8aw6TxQ

Part 4: Get the Facts
https://www.youtube.com/watch?v=Q2UTbPB7QaE

Part 5: Fuel Matters
https://www.youtube.com/watch?v=BVQTQsDlEoo

Want to check out more about Driven Racing Oil?
https://partspro.com/manufacturer/driven-racing-oil

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR1515CAM): Manual Rack and Pinion for 2016 Chevy Camaro

David Ayers Leave a comment
Use This Post Clip for Email

The all-new, direct-fit, made in America rack and pinion for 2016 Camaro from Flaming River achieves a lighter weight than stock by ditching hoses, pulleys, and pumps while exhibiting improved handling characteristics over same. A shorter pinion shaft improves clearance for large tube headers and engine swaps in custom applications.

Features

  • Lighter weight and greater clearance than stock.
  • Bolts into same mounting location as OEM Power Rack.
  • Overall length: 49.00”.
  • Pivot points: 30.25”/30.38”.
  • Mounts center-to-center: 11.75” (0.420″ diameter mounting holes).
  • 9/16”-26 spline pinion shaft.
  • Inner tie rod end thread: M16 x 1.5.
  • Inner tie rod end length: 10.38”.
  • Made in the USA.

Flaming River Manual Rack and Pinion for 2016 Camaro FR1515CAM

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (CT530): CarTech’s The Definitive Firebird & Trans Am Guide 1967-1969

David Ayers Leave a comment
Use This Post Clip for Email

One year after seeing the Mustang’s enormous sales success, General Motors announced the development of its own pony-car platform. Chevrolet Camaros and Pontiac Firebirds hit the market as 1967 models, and the world clamored for more of these new Mustang killers. These F-Body cars became some of the most popular enthusiast cars of all time.

Released in hardcover form from CarTech, The Definitive Firebird & Trans Am Guide 1967–1969 by Pontiac expert and historian Rocky Rotella examines each production year of the first generation of Firebirds. Production figures, option codes, running changes, model year changes and variances, rarity, collectability, interviews with engineers, and more are thoroughly covered in what is sure to become the ultimate Firebird reference book. Readers will also enjoy archival photographs from these cars’ launch as well as color photos of both original and restored examples.

Pages: 192
Size: 8.5” x 11”
Format: Hardback
Illustrations: 273 color, 49 black and white

CarTech The Definitive Firebird & Trans Am Guide 1967-1969

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD Performance (88362): Circle Track HEI Ignition Module

David Ayers Leave a comment
Use This Post Clip for Email

If you’re a racer who desires to upgrade your current HEI while maintaining a “stock appearing” module for rules purposes, the 88362 from MSD Performance is designed to get the job done. It achieves a high output suitable for circle track racing, producing the spark energy and performance that your application demands.

The 88362 ignition module is a direct replacement for MSD’s circle track HEI distributor (8362CT) or any cast housing HEI.

Features

  • Stock appearing.
  • Direct replacement for the 8362CT MSD circle track HEI distributor.
  • High output for circle track racing demands.
  • Extremely reliable.

MSD Performance Circle Track HEI Ignition Module

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (69-2553TTK): Typhoon Air Intake for Dodge Challenger/Charger SRT Hellcat

David Ayers Leave a comment
Use This Post Clip for Email

The K&N Typhoon air intake system is a complete air induction system replacement for some Dodge Challenger/Charger SRT Hellcat models. The Typhoon dramatically reduces air flow restriction for more usable power and acceleration throughout the RPM range, while the oversized conical filter can be used for up to 100,000 miles before servicing (depending on driving conditions).

The 69-2553TTK intake comes with a chrome-topped K&N high-flow air filter, mandrel-bent aluminum tube, and heat shield. The black powder-coated tube accommodates the factory intake air temperature sensor and crank case vent hose.

Note: Check your vehicle application for specific CARB status.

Features

  • Guaranteed to increase horsepower.
  • Improves throttle response and engine sound.
  • Free-flowing aluminum tube.
  • Filter lasts up to 100,000 miles before service is required.
  • Replaces entire factory air intake system.
  • Washable, reusable lifetime air filter.
  • Warranty: K&N Million Mile Limited.

K&N Typhoon Air Intake for Dodge Challenger or Charger

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker BlackHeart: 304 SS Long-Tube Headers for ’79-’93 Ford Mustang LS Swap

David Ayers Leave a comment
Use This Post Clip for Email

Doing an LS swap for your 1979–1993 Ford Mustang with Fox body? Hooker BlackHeart has your long-tube headers, which provide excellent ground and component clearance and are designed specifically to work with Hooker BlackHeart transmission crossmembers and engine mounts for a trouble-free installation. Constructed from 18-gauge, mandrel-bend 304 stainless steel for maximum strength and durability and backed by a limited lifetime warranty. All hardware included. Ask for part number 70101350-RHKR.

Features

  • Lightweight, 18-gauge, mandrel-bent stainless steel.
  • 1-7/8” primary tubes and long-transition 3” collectors with merge spears for maximum flow and increased exhaust velocity.
  • 3/8” thick, CNC-waterjet header flanges for strength and maximum sealing surface.
  • Compatible with stock or multiple validated aftermarket engine K-members.
  • Compatible with the stock steering shaft/rag joint coupler (stock K-member only) and aftermarket steering shafts.
  • Designed to work specifically with Hooker BlackHeart transmission crossmembers and engine mounts.
  • Hand-welded construction for strength, longevity, and good looks.
  • Tube geometry designed for maximum clearance and hassle-free installation.
  • All hardware included.
  • Warranty: limited lifetime.

Hooker BlackHeart Long Tube Headers for Mustang LS Swap 70101350-RHKR

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.