Category: Industry

Belltech (2514): Drop Spindle Set

John Arnaud Leave a comment
Use This Post Clip for Email

The Belltech 2514 drop spindle set lowers your vehicle 2” or 3”, depending on application, while improving handling and factory ride quality. This product fits 2016+ Chevy Silverado 1500, plus a variety of other applications, including but not limited to certain years of Cadillac Escalade, Chevrolet Suburban and Tahoe, and GMC Sierra 1500 and Yukon.

Features

  • Lowers 2” or 3”, depending on application.
  • Improves handling and factory ride quality.

Belltech Drop Spindle Set 2514

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ARP: Pro Series Head Stud Kits for Big Block Chrysler

John Arnaud Leave a comment
Use This Post Clip for Email

Manufactured from premium-grade 8740 chrome-moly and available with either hex or 12-point nuts, the new BBC head stud kits from ARP feature centerless-ground Pro Series studs heat-treated before thread rolling and nominally rated at 200,000 PSI tensile strength. Kits includes a 0.5 oz. pack of ARP Ultra-Torque fastener assembly lubricant and are available for immediate delivery.

Two part numbers available:

  • 145-4014: Big block Chrysler 383-440 with Edelbrock Victor 77919 or 77920 heads hex.
  • 145-4301: Big block Chrysler 383-440 with Edelbrock Victor 77919 or 77929 heads 12-point.

Features

  • Choose from hex nuts or 12-point nuts.
  • Made from premium-grade 8740 chrome-moly.
  • Centerless ground and heat treated.
  • Rated at 200,000 PSI tensile strength.
  • Includes 1/2-ounce pack of ARP Ultra-Torque fastener assembly lubricant.
  • Available for immediate delivery.

ARP Pro Series Stud Kits for Big Block Chrysler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Air Lift: Get Up to a $150 Combined Rebate on Installed Air Compressors and Air Springs

John Arnaud Leave a comment
Use This Post Clip for Email

Via mail-in form. Get $75 back when you buy a qualifying on-board air compressor system and $75 back when you buy an adjustable air spring kit from a professional installer and have them install it. Offer valid September 1 to December 31, 2017. Click image for printable form and complete details!

 

Air Lift 150 Dollar Rebate 2

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR1057): Watch Dog Automatic Battery Disconnect Safety Switch

John Arnaud Leave a comment
Use This Post Clip for Email

The Watch Dog automatic battery disconnect switch from Flaming River can handle 300 amps of current continuously for both 12V and 24V systems. The product’s “magnetic latch” technology secures On/Off positions without current draw and requires over 80G of force to mechanically separate the contacts.

With IP67 and IP69K International Protection ratings, the Watch Dog resists dust and moisture and offers programmable time-delay settings and a manual emergency toggle switch with LED system status indicator.

The FR1057 kit includes the main battery disconnect switch, emergency toggle switch, four-way wire harness (8.33’), seven-way wire harness (13.25’), and stainless steel momentary push button (FR1301).

Features

  • Simplify shutdown with automatic battery disconnection and programmable time-delay shutdown.
  • Bistable “magnetic latch” technology maintains on and off positions without consuming current.
  • Max continuous current load of 300 amps.
  • Supports 12V and 24V systems out of the box.
  • Durable, dustproof, and watertight—even against high-pressure water jets.
  • Emergency toggle switch for manual Watch Dog battery disconnect.

Flaming River Battery Disconnect FR1301

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (050221): Boom Mat XL

John Arnaud Leave a comment
Use This Post Clip for Email

Coming in at 4mm thick—166% thicker than DEI’s original damping material—the Boom Mat XL from Design Engineering, Inc. provides powerful noise damping for the most extreme commercial and sound-competition applications.

Boom Mat XL stops the audible vibration and rattling of interior panels by trapping the sound between the top skin and the asphalt-free butyl layer and provides sag-free performance on any interior surface (vertical or overhead) even in the hottest conditions. Doing its job with only 25–50% coverage, the DEI Boom Mat XL saves weight, cost, and time and is the industry standard for vibration-damping technology.

Available in a two pack (for door), five pack (for trunk), or 10 pack (for floor).

Features

  • High-performance adhesive maintains adhesion throughout temperature extremes.
  • Eliminates low-frequency noise problems.
  • Non-hazardous flexible material can be applied to irregular surfaces.
  • Easily trimmed to size with Boom Mat blade lock knife (050216).
  • User-friendly peel-and-stick installation.
  • Multiple uses including automotive, commercial, and industrial applications.
  • Durable, weatherproof construction is also corrosion resistant.
  • Flammability rated.

DEI Boom Mat XL 050221

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M (30497): Transmission Adapter Plate – SBC/BBC Engine to BOP TH350/400/700R

John Arnaud Leave a comment
Use This Post Clip for Email

Used to adapt SBC/BBC engines to a Buick, Oldsmobile, Pontiac transmission, this B&M transmission bellhousing adapter plate is laser-cut to exacting tolerances for a precise fit, then powder coated with a premium black finish. Features the iconic B&M logo laser cut into the plate, and includes mounting hardware and installation instructions. Made in the USA.

Note: Does not fit LS or LS-based LT. For Chevy small-block and big-block engines manufactured after 1962.

Features

  • Precise laser-cut fit.
  • Black powder-coated finish.
  • Heavy 10-gauge steel.
  • Laser-cut B&M

B&M Transmission Adapter Plate 30497

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Driven Racing Oil (50070): Speed Shield Spray and Shine Protectant

John Arnaud Leave a comment
Use This Post Clip for Email

Speed Shield spray and shine protectant from Driven Racing Oil sheds dirt, dust, and mud while providing a glossy protective film that isn’t wet or oily. Its advanced surfactant ingredients create a durable, lasting polish that helps prevent mud and dirt from sticking to surfaces. Speed Shield is ideal for off-road, powersports, and dirt racing vehicles, while its fast-drying, water-resistant formula works great on plastic, paint, decals, and fiberglass.

Speed Shield comes in a 12 oz. aerosol can that emits a powerful spray able to displace dirt—no wiping required—to make clean-up easier than ever before.

Features

  • Aerosol action displaces dirt with no wiping.
  • Creates a glossy protective film that isn’t wet or oily.
  • Water-resistant formula.
  • Safe to use on plastic, paint, decals, and fiberglass.

Driven Racing Oil Speed Shield

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: AutoMeter Extreme Environment Gauges

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we welcome Joseph Mills from AutoMeter and install their Extreme Environment Gauges on a modified street dirt car.

Parts used in this video:

100-340°F Oil Temp Gauge (9240)
0-120 PSI Oil Pressure Gauge (9253)
100-300°F Water Temp Gauge (9255)
0-15 PSI Fuel Pressure Gauge (9261)

Want to check out more about AutoMeter?
https://partspro.com/manufacturer/auto-meter

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Driven Racing Oil (JGP70048): Injector Defender Gasoline Fuel Additive

John Arnaud Leave a comment
Use This Post Clip for Email

Injector Defender from Driven Racing Oil not only prevents harmful corrosion from today’s ethanol-blended and poor-quality gasolines, but it also restores performance, protects fuel injection systems from power-sapping deposits, and provides fuel stabilization and preservation. This pour-in solution will not harm sensors in all fuel-injected cars, trucks, motorcycles, and marine engines. Each 10-ounce bottle (JGP70048) treats up to 25 gallons of gasoline.

Features

  • Prevents harmful corrosion and restores performance.
  • Protects fuel injection systems from performance-robbing deposits.
  • Stabilizes and preserves fuel.
  • Won’t harm sensors in fuel-injected vehicles.
  • Ten ounces treat 25 gallons of gas.

Driven Racing Oil Injector Defender JGP70048

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (12146FLT): Stainless Steel Axle-Back Exhaust System for ’15-’17 Mustang GT V8 5.0L

John Arnaud Leave a comment
Use This Post Clip for Email

With its 2.5” diameter polished 304 stainless steel construction, the 12146FLT axle-back exhaust system for 2015–2017 Ford Mustang GT from Flowtech combines premium fitment and maximum performance to coax the most out of your 5.0L engine. The high-flow, straight-through design offers an aggressive exhaust tone, while the carefully calibrated tube geometry and use of OEM mounting points facilitate a hassle-free installation.

Note: Installation requires cutting; Flowtech recommends the use of a professional technician.

Features

  • 2-1/2″ diameter polished 304 stainless steel.
  • High-flow, straight-through mufflers.
  • Aggressive exhaust tone.
  • 4” polished dual-wall exhaust tips.
  • Quality welds for strength, longevity, and good looks.
  • Tube geometry designed for hassle-free installation.
  • Uses OEM mounting points for factory-like fitment.

Flowtech SS Axle Back Exhaust for Mustang GT 12146FLT

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.