Category: News

NOCO: Lithium Jump Starters Bring Dead Batteries to Life in Seconds

David Ayers Leave a comment
Use This Post Clip for Email

The Genius Boost line of ultra-portable, lightweight, and compact lithium jump starters from The NOCO Company is engineered to significantly outperform traditional lead-acid technology. Genius Boost can safely jump start a dead battery in seconds—up to 20 times on a single charge. All four models are mistake-proof, featuring spark-proof technology and reverse polarity protection, making them safe for anyone to use. Able to hold their charge for up to one year and doubling as USB battery packs for recharging personal devices on the go, these products also feature a built-in, high-output LED flashlight. NOCO Genius Boost jump starters are intended for 12-volt lead-acid batteries in cars, boats, trucks, motorcycles, and more. They are safe to use on engines of any size.

Choose From:

  • GB20 400A Genius Boost Sport: For gas motorcycles, ATVs, lawn mowers, and cars with precision clamps for hard-to-reach batteries. Recommended for engines up to 4.0L gas.
  • GB40 1,000A Genius Boost Plus: For gas and diesel cars, trucks, boats, and more. Recommended for engines up to 6.0L gas and 3.0L diesel.
  • GB70 2,000A Genius Boost HD: For gas and diesel high-displacement cars, trucks, boats, and more. Equipped with a 12V in-and-out port for powering 12V devices such as tire pumps, inverters, and more. Recommended for engines up to 8.0L gas and 6.0L diesel.
  • GB150 4,000A Genius Boost Pro: For gas and diesel high-displacement cars, trucks, boats, and more. Equipped with a built-in voltmeter and 12V in-and-out port for powering 12V devices. Recommended for 10L+ gas and diesel engines up.

Genius Boost Lithium Jump Starters

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hushmat: More Than 300,000 Custom Year/Make/Model Kits Available

David Ayers Leave a comment
Use This Post Clip for Email

Hushmat Custom Kit

As of 2018, Hushmat has exceeded 300,000 custom sound-deadening and thermal-insulating vehicle kits. These year/make/model–specific bundles make it easy to order and install exactly what you need, providing preformed and presized solutions designed to insulate against heat and noise. These complete kits include application-specific templates to facilitate installation.

Originator of Hushmat and Hushmat Ultra, Hushmat produces the only aftermarket sound-deadening and thermal-insulating material made in America.

Features

  • Custom kits available for more than 300,000 specific applications.
  • Thermal and sound insulation for cars and trucks.
  • Applies to the sheet metal, plastic, or fiberglass surrounding your vehicle’s interior.
  • Reduces engine, exhaust, and radiant heat.
  • Reduces road, engine, and exhaust noise.

Hushmat Installed

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: Header Flanges for Small-Block Chevy 265-400

David Ayers Leave a comment
Use This Post Clip for Email

Hedman Hedders header flanges meet the same rigid quality-assurance standards as the flanges used to produce Hedman’s ready-to-bolt-on headers, ensuring that the fruits of your hard work will last for years to come. Their mild steel construction is easy to work with, and they come with 1-5/8” starter stubs (29210) or without (29200).

Features

  • Precision laser-cut flanges.
  • Mild steel construction.
  • Sold in pairs.
  • Available with or without welding stubs.

Hedman Hedders Flanges

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD Performance (6415): 6EFI Universal Ignition Control

David Ayers Leave a comment
Use This Post Clip for Email

Made to complement your MSD Performance Atomic EFI (or other aftermarket electronic fuel injection), the 6EFI ignition control is a universal product designed to work in harmony with EFI systems (on 4-, 6-, or 8-cylinder engines) and comes with detailed wiring instructions to make installation a breeze.

The 6415 6EFI produces numerous benefits, including increased throttle response, smoother idle, quicker starts, and full ignition power throughout the entire RPM range. It also offers capacity discharge technology, which fires a series of multiple sparks that last for 20 degrees of crankshaft rotation when the engine is running at lower RPM. Finally, MSD gave this product an adjustable rev limiter (via rotary dials in 100 RPM increments) to protect your engine in the event of a missed shift or driveline failure.

Features

  • Specially designed for EFI systems.
  • Compact housing.
  • Detailed instructions included.
  • Capacitive discharge technology.
  • Integrated rev limiter.
  • Works with 12V distributed electrical systems.
  • Easily connects to magnetic pickup, electronic, and even points distributors.

MSD Performance 6EFI Universal Ignition Control

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66978): Eight-Piece Aluminum AN Wrench Set

David Ayers Leave a comment
Use This Post Clip for Email

Color-coded, lightweight, and affordable AN hex wrench set from PROFORM is ideal for tightening valuable aluminum fittings without marring damage. Kit includes eight wrenches.

Features

  • 8-piece, color-coded set.
  • Includes sizes -3AN through -20AN.
  • Quality aluminum construction.

 

PROFORM Eight-Piece Aluminum AN Wrench Set

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AEM Water_Methanol Injection Systems

AEM: Water/Methanol Injection Kits for Forced-Induction Gas Engines

David Ayers Leave a comment
Use This Post Clip for Email

Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven way to reduce engine inlet air temperatures and suppress harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%.

AEM has two controller kits available that fit the bill: one boost-dependent version for vehicles up to 35 PSI (30-3300). This part number includes an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup. The second (30-3350) has a multiple input design that allows installation on ultra-high boost vehicles (above 35 PSI) using a 0–5-voltage-based external MAP sensor.

Features

  • For gas-powered race engines.
  • Water/methanol injection reduces engine inlet air temperatures.
  • Suppresses harmful detonation.
  • Increases boost and advance ignition timing (without high-octane fuel).
  • Two kits available: 30-3300 (up to 35 PSI) and 30-3350 (35+ PSI).

AEM Water_Methanol Injection Systems

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro Performance Centers™: Driven Racing Oil Analysis Kit

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro Performance Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we welcome Lake Speed, Jr. from Driven Racing Oil into the garage and he tells us about their Oil Analysis Kit.

Parts used and referenced in this video:

Oil Analysis Kit (DR100-21)

Want to check out more about Driven Racing Oil?
https://partspro.com/manufacturer/driven-racing-oil

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: $25 Rebate on AVS2 Carburetor Purchases

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer valid January 15 to January 30, 2018. Click image for printable form and complete details!

 

Edelbrock 25 Dollar Rebate on AVS2 Carb

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro Performance Centers™: Oil in Race Cars with Driven Racing Oil

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro Performance Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we welcome Lake Speed, Jr. from Driven Racing Oil back to the garage and we talk about what to look for in an oil for your racing application.

For more info on oil, check out these videos on the 5 Things You Need to Know about Oil:

Part 1: The Four R’s
https://www.youtube.com/watch?v=V1VSUuQZvos&t

Part 2: Balance is Best
https://www.youtube.com/watch?v=KA-vYCnz8l8

Part 3: Clean, Cool, & Dry
https://www.youtube.com/watch?v=GFjq8aw6TxQ

Part 4: Get the Facts
https://www.youtube.com/watch?v=Q2UTbPB7QaE

Part 5: Fuel Matters
https://www.youtube.com/watch?v=BVQTQsDlEoo

Want to check out more about Driven Racing Oil?
https://partspro.com/manufacturer/driven-racing-oil

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR1515CAM): Manual Rack and Pinion for 2016 Chevy Camaro

David Ayers Leave a comment
Use This Post Clip for Email

The all-new, direct-fit, made in America rack and pinion for 2016 Camaro from Flaming River achieves a lighter weight than stock by ditching hoses, pulleys, and pumps while exhibiting improved handling characteristics over same. A shorter pinion shaft improves clearance for large tube headers and engine swaps in custom applications.

Features

  • Lighter weight and greater clearance than stock.
  • Bolts into same mounting location as OEM Power Rack.
  • Overall length: 49.00”.
  • Pivot points: 30.25”/30.38”.
  • Mounts center-to-center: 11.75” (0.420″ diameter mounting holes).
  • 9/16”-26 spline pinion shaft.
  • Inner tie rod end thread: M16 x 1.5.
  • Inner tie rod end length: 10.38”.
  • Made in the USA.

Flaming River Manual Rack and Pinion for 2016 Camaro FR1515CAM

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.