Category: News

Belltech (6447): Rear Axle Flip Kit for 2015+ Ford F-150

David Ayers Leave a comment
Use This Post Clip for Email

New from Belltech is a Rear Axle Flip Kit for 2015-and-up Ford F-150 trucks (Ext/Crew Cab Short Bed 2 and 4WD). The 6447 kit includes all the components and hardware you’ll need to properly lower your pickup 4” in the rear.

Features

  • For 2015+ Ford F-150 Ext/Crew Cab Short Bed (2WD & 4WD)
  • Lowers rear 4”.
  • Includes all required components and hardware.

Belltech (6447): Rear Axle Flip Kit for 2015+ Ford F-150

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

RACE GAS: Race Fuel Concentrate

David Ayers Leave a comment
Use This Post Clip for Email

When blended to the proper ratio, Race Fuel Concentrate from RACE GAS transforms ordinary pump gasoline into high-octane, high-energy, track-grade racing fuel. The secret is a chemist-derived blend that, when combined with pump gas, produces results on par with regularly distilled 100-octane gasoline by reintroducing the key elements of racing fuel: hydrocarbons, oxygenates, and organometallic compounds.

RACE GAS has burned its Race Fuel Concentrate in everything from a 944 Turbo race car, modified Audi TT, and Hemi Magnum to a Hemi Challenger and modified VW R32. All enjoyed increases in power, throttle response, and torque. See for yourself what so many others are discovering!

RACE GAS: Race Fuel Concentrate

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Cometic Gasket (PRO1007T): Top-End Gasket Kit for GM Gen III LS Series Small Block

David Ayers Leave a comment
Use This Post Clip for Email

StreetPro gasket kits from Cometic Gasket cater to value-minded street-rodders looking for all the gaskets and seals needed for their rebuild. Available in top-end and bottom-end variants, StreetPro gasket kits facilitate a total engine rebuild, with quality materials including MLS, AFM, Aramid Fiber, and Armor Clad.

Features

  • Includes all gaskets and seals needed for your rebuild.
  • Top-end and bottom-end kits available.
  • Budget-conscious pricing without sacrificing quality.
  • Materials include MLS, AFM, Aramid Fiber, and Armor Clad.

Cometic Gasket (PRO1007T): Top-End Gasket Kit for GM Gen III LS Series Small Block

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley: GM-Licensed Vintage Series Valve Covers and Air Cleaners

David Ayers Leave a comment
Use This Post Clip for Email

Holley is partnering with GM to offer additions to the company’s Vintage Series air cleaner and valve cover lineups. These die-cast aluminum engine dress-up accessories feature classically inspired fins and high-definition retro branding; plus, you can get them in several finishes to match your particular build.

Valve Cover Features

  • “Chevrolet” script logo and wrap-around finned design.
  • Fits all 1958–1986 small block Chevy engines with a perimeter bolt pattern.
  • Die-cast aluminum enables high-quality details and reduces valve cover flange warping and oil leaks.
  • 5” tall with a solid body for non-emissions applications or custom-crankcase ventilation setups.
  • Available in Natural Cast Aluminum, Polished, Satin Black with machined fins/logo, or Factory Orange with machined fins/logo.

Air Cleaner Features

  • 14” die-cast aluminum construction with finned design and iconic Chevy “Bowtie” logo.
  • Available with replacement paper filter or reusable cotton gauze (red) air filter element.
  • Stamped-steel, color-matched SureFlo base with knock-out provisions for fresh air adapter.

holley-licensed-air-cleaners-and-valve-covers

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ACCEL: COP Coils for Ford 2.0L, 2.3L, and 3.5L EcoBoost

David Ayers Leave a comment
Use This Post Clip for Email

ACCEL is now offering high-quality, high-output coil-on-plug (COP) coils to EcoBoost owners! ACCEL SuperCoils feature up to 15 percent higher energy output over OE coils along with optimized windings, resistance, and turn ratios to unleash your engine’s maximum horsepower potential. ACCEL late-model Ford EcoBoost SuperCoils are available in traditional ACCEL yellow, and also in blue and black!

Features

  • Up to 15% more spark energy than OEM coils.
  • Improved throttle response and fuel efficiency.
  • High-temperature, vacuum-applied epoxy resists shock and vibration.
  • Installs in less than an hour.
  • Direct OEM replacement and ODB II compatible (will not trip an engine code).
  • Choice of yellow, blue, or black, depending on application.
  • Offered in singles and multipacks.

ACCEL: COP Coils for Ford 2.0L, 2.3L, and 3.5L EcoBoost

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Freedom Ford Has Landed at SEMA!

David Ayers Leave a comment
Use This Post Clip for Email

Freedom Ford Has Landed at SEMA!

The AAM Group’s “Freedom Ford” project truck has taken its place at booth SU02 at the SEMA Show after a 2,200-mile, multi-day trek that started in northeast Tennessee at AAM Group™ headquarters and wound its way through Arkansas, Oklahoma, Texas, New Mexico, and Arizona before finally arriving for exhibition in Las Vegas for the anticipated automotive aftermarket extravaganza.

Freshly prepped, polished, and shined for the show, Freedom Ford is a 2016 Ford F-150 wrapped in custom black digital camo blended with an American flag graphic. Boasting 35” tires and a 7” lift, Freedom Ford is an imposing presence and a patriotic tribute to the hard-earned liberty we enjoy in the United States thanks to the vigilance and sacrifices of our most courageous citizens.

See It in Person

Freedom Ford was outfitted by many of the biggest names in the truck aftermarket, headlined by primary sponsor Lund International. SEMA Show attendees can get an up-close view of Freedom Ford by stopping by event space SU02.

Freedom Ford Has Landed at SEMA!

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66448.12N): Black Crinkle One-Wire Alternator, GM 120 Amp

PROFORM (66448.12N): Black Crinkle One-Wire Alternator, GM 120 Amp

David Ayers Leave a comment
Use This Post Clip for Email

The 66448.12N alternator is the same popular PROFORM alternator you’ve come to love, except with a black crinkle finish to match the other black parts under your hood!

Most alternators look the same on the outside, so it’s what’s on the inside that distinguishes them. To ensure reliability, PROFORM alternator components are produced by highly specialized machines and assembled by trained personnel using dedicated jigs and equipment—from 100% new materials for maximum longevity and optimum performance. Each alternator is individually tested at the factory after assembly, then boxed with a quality-assurance graph that documents that specific unit’s output performance. PROFORM does the testing for you, with the data to back up the results!

Features

  • One-wire alternator.
  • GM 120 amp.
  • Distinctive black crackle finish.

PROFORM (66448.12N): Black Crinkle One-Wire Alternator, GM 120 Amp

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (450-745): AIRAID Jr. Intake Kit for ’11-’14 Mustang 3.7L

David Ayers Leave a comment
Use This Post Clip for Email

The AIRAID Jr. Kit from AIRAID targets the restrictive elements of factory intake systems—specifically the intake tube and paper filter—to boost horsepower and mileage. The 450-745 is a simple, economical introduction into the performance aftermarket, “straightening” air flow to the engine for added throttle response and increased horsepower and torque.

Designed specifically for your 2011–2014 Ford Mustang with 3.7L V6 engine, this kit installs with no drilling and includes a washable, reusable, oiled replacement filter backed by the AIRAID No-Hassle Lifetime Warranty.

Note: 450-745 is street legal in all US states (CARB EO Number D-609-11).

Features

  • Oiled direct-fit replacement filter (recommended for dusty, dry driving conditions).
  • Helps boost horsepower and acceleration.
  • Replaces stock air filter and intake tubing while retaining stock air box.
  • High-airflow premium air filter.
  • Low-restriction polyethylene intake tube.
  • Easy to install with little mechanical knowledge.
  • Washable and reusable air filter media.
  • AIRAID’s No-Hassle Lifetime Warranty.

AIRAID (450-745): AIRAID Jr. Intake Kit for ’11-’14 Mustang 3.7L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech: 1.75” Long-Tube Headers for ’11-’14 Mustang 3.7L

David Ayers Leave a comment
Use This Post Clip for Email

Providing the perfect combination of quality and value, Flowtech is releasing three new long-tube headers for 2011–2014 Mustang with a 3.7L V6: two in mandrel-bent 409 stainless steel (12142FLT, natural finish and 32143FLT, silver ceramic-coated finish) and one in 304 stainless steel (12143FLT, polished finish). These headers are a must if you’re running a cold air intake, cat-back exhaust, or tuner, with consistent tubing diameters for smooth flow and increased exhaust velocity.

Features

  • Heavy-duty 16-gauge tubing for increased strength and durability.
  • Smooth transition, 1-3/4” diameter primary tubes for improved exhaust flow, performance, and throttle response.
  • OE-style 2-1/2” ball and socket collector connects to factory exhaust head pipe with no cutting or welding.
  • TIG-welded and machined 3/8” header flange for a strong, leak-free seal.
  • Premium aluminum header gaskets included.
  • Available finishes include Natural, Polished, and Silver Ceramic Coated.

Flowtech: 1.75” Long-Tube Headers for ’11-’14 Mustang 3.7L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Trans Dapt Performance (6048): Finned Aluminum Oval Air Cleaner Set

David Ayers Leave a comment
Use This Post Clip for Email

Aluminum Air Cleaner Sets from Trans Dapt Performance not only provide good-looking performance, but also include all required fasteners and a replaceable filter element to get you up and running in no time. The finned design of these air cleaners will give your engine compartment a clean, retro look.

Note: Not legal for sale or use on pollution-controlled motor vehicles.

Features

  • Includes air cleaner top, base, high-flow paper air filter element, and hold-down bolt.
  • 2” x 15” with 5-1/8” neck
  • Style: Polished aluminum oval with two sets of fins across the top.

Trans Dapt Performance (6048): Finned Aluminum Oval Air Cleaner Set

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.