Category: News

AEM: X-Series Datastream Gauges

David Ayers Leave a comment
Use This Post Clip for Email

AEM has added three new entries to its X-Series line of digital gauges: the AEMnet CAN Bus Gauge, the GPS Speedometer Gauge, and the OBDII Gauge. Note: An optional silver bezel with white faceplate accessory kit is available (sold separately).

AEMnet CAN Bus Gauge

30-0312 displays multiple channels of data from AEMnet CAN bus–equipped devices: it’s like having multiple gauges in one display!

It connects via a 4-pin DTM connector and displays data in either US or metric units. View multiple data channels from an Infinity ECU, Series 2, or EMS-4 standalone; view AFR or Lambda from X-Series or 4-channel wideband controllers; or view vehicle speed and acceleration from a vehicle dynamics module. Users can program which available channels they want to display, choose between displaying Lambda or AFR, and clear peak values for channels by using the buttons on the faceplate.

GPS Speedometer Gauge

30-0313 displays ground speed, course, and altitude via an included 10Hz GPS receiver. Users can integrate the X-Series GPS speedo into an Infinity ECU, Series 2 EMS, or EMS-4 to add track mapping, and an included vehicle speed signal can be outputted to an existing speedometer to eliminate the need for a vehicle speed sensor.

A 10Hz GPS receiver receives speed, heading, and altitude data from multiple satellites at 10 samples/second, providing excellent accuracy and reliability. The GPS receiver includes a magnet and adhesive bottom for exterior mounting on the vehicle.

OBDII Gauge

30-0311 puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle’s OBD port and transmitting those channels to the gauge display. It also reads and clears diagnostic trouble codes (DTCs). Wiring is simple: just connect the gauge to your vehicle’s OBDII port using the supplied connector! Because this instrument reads OBDII parameters transmitted through a vehicle’s CAN data stream, it is compatible only with 2008+ model year vehicles.

X-Series Shared Features 

  • 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods.
  • Slim 0.825” overall gauge depth and 0.200” cup depth—mount them nearly anywhere!
  • 24 green outer LEDs for quick engine parameter reference.
  • Auto-dimming sensor delivers ideal display brightness.
  • Positive locking connector provides a secure connection.
  • Compatible with 16-volt vehicle systems.
AEM: X-Series Datastream Gauges
AEM: X-Series Datastream Gauges

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker (71222008HKR): GM A-body LS Swap Transmission Crossmember

David Ayers Leave a comment
Use This Post Clip for Email

Hooker, a leader in LS engine swaps, has announced a new Transmission Crossmember for 1964–1967 GM A-body—available now! Its bolt-in design makes installation a snap, provides excellent ground clearance, and optimizes driveline angles. Designed for use with Hooker 71221008HKR or 71221009HKR 1964-67 A-body LS engine brackets to optimize U-joint working angles.

Features

  • High-strength/low-alloy steel construction for to balance strength, stiffness weight, and cost.
  • Modular design allows for direct installation of T56/T56 Magnum and 4L80/4L85 transmissions in any non-boxed frame 1964–1967 A-body vehicle.
  • Available add-on transmission adapters.
  • Black powdercoat provides attractive corrosion resistance.
Hooker (71222008HKR): GM A-body LS Swap Transmission Crossmember
Hooker (71222008HKR): GM A-body LS Swap Transmission Crossmember

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Freedom Ford Is a Go!

David Ayers Leave a comment
Use This Post Clip for Email

Freedom Ford Logo

On the heels of last year’s “NSF1” Jeep Wrangler, built to benefit the Navy Seal Foundation, The AAM Group™ is hard at work on the “Freedom Ford,” a 2016 Ford F-150 wrapped in a custom black digital camo blended with an American flag graphic. Boasting 35” tires and a 7” lift, the Freedom Ford is an imposing presence and a patriotic tribute to the hard-earned liberty we enjoy in the United States thanks to the vigilance and sacrifices of our most courageous citizens.

See It in Person

AAM Group Freedom Ford
AAM Group Freedom Ford

Also known as “Freedom 1,” the Freedom Ford is being outfitted by many of the biggest names in the truck aftermarket—headlined by primary sponsor Lund International. It will be exhibited at Lund International’s #SU02 booth at this year’s SEMA show.

Primary Sponsoring Brands

  • LUND, AMP Research, AVS, Bushwacker, and Roll-N-Lock

Additional Sponsoring Brands

  • BedRug
  • BFGoodrich
  • CURT
  • Edge Products
  • Flowmaster
  • Go Rhino
  • Husky Liners
  • K&N
  • Putco
  • Raceline Wheels
  • ReadyLIFT
  • Royal Purple
  • Vision X
  • WARN

Print and Wrap Services

Pat Shell of Shell SWAG (Signs, Wraps, and Graphics) in Johnson City, TN. 423-676-4204 / ShellSwag.com

Lift Services

Joey Yokum at Atomic City 4×4 in Oak Ridge, TN. 865-481-8006

AAM Group Freedom Ford
AAM Group Freedom Ford
AAM Group Freedom Ford
AAM Group Freedom Ford
AAM Group Freedom Ford
AAM Group Freedom Ford
AAM Group Freedom Ford
AAM Group Freedom Ford

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Quick Fuel Technology (30-125-1R): 125 gph Electric Fuel Pump and Regulator

David Ayers Leave a comment
Use This Post Clip for Email

Electric fuel pumps from Quick Fuel Technology are perfect for combinations that are neither stock nor all-out race cars. The 125-gph 30-125-1R model (pumps also available in 155 and 175 gph) pumps more than enough fuel to support 400–750 hp applications. This pump draws just 4 amps of current and can produce 14 psi of maximum pressure. Mounting hardware, brackets, and fuel pressure regulator (30-803) included; for carbureted applications only!

Features

  • 125 gph flow rate.
  • Lightweight steel and aluminum construction.
  • 14 psi maximum pressure.
  • 3/8” NPT inlets and outlets.
  • Externally accessible pressure relief valve.
  • Draws 4 amps or less at full load.
  • Designed for carbureted applications only.
  • Comes with fuel pressure regulator (30-803).
  • Includes mounting bracket, hardware, and instructions.
Quick Fuel Technology (30-125-1R): 125 gph Electric Fuel Pump and Regulator
Quick Fuel Technology (30-125-1R): 125 gph Electric Fuel Pump and Regulator

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD Performance (60143): LS Series Ignition Controller

David Ayers Leave a comment
Use This Post Clip for Email

As the popularity of GM LS engines continues to grow, so does the demand for a powerful, reliable, and easily adaptable ignition systems. MSD Performance has answered the call with an updated, improved version of the popular 6LS box. With the 60143 LS Series Ignition Controller, users will enjoy high-speed data acquisition, an optional coolant temperature sensor input, idle timing control, individual cylinder timing, and more. These features are in addition to the existing programmable step retard, launch retard, and RPM rev limiters from the controller’s predecessor. Compatible with all MSD Performance, ACCEL, and GM LS coils!

Features

  • Fits most LS engines.
  • No PC required for basic functionality.
  • Six preprogrammed timing tables.
  • Rotary selector switch for timing changes on the fly.
  • Nitrous and boost compatible.
  • Fully sealed direct plug-in connectors.
  • Programmable step and launch retard.
  • Launch and maximum rev limiters.
  • Optional coolant temperature sensor input.
  • Idle timing control.
  • Individual cylinder timing.
MSD Performance (60143): LS Series Ignition Controller
MSD Performance (60143): LS Series Ignition Controller

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley (550-443): Terminator Stealth EFI Kit with GM Transmission Control

David Ayers Leave a comment
Use This Post Clip for Email

Have you resisted switching to EFI because you like the traditional look of a carburetor? Do you have a GM 4L60/80E transmission in your hotrod? Stop worrying! Holley’s recently released Terminator Stealth throttle body fuel injection system gives you all of the benefits of EFI with the traditional carburetor look you love.

The 550-443 Terminator Stealth EFI system possesses the same great self-tuning features of Holley’s original Terminator EFI in a stealthy new configuration. Holley has made this new system easy to install, with no computer experience required and an included hand-held tuner with multiple-choice setup wizard to get you up and running quickly. Even better, the system self-tunes while you drive, and you can upgrade to complete laptop control without buying another ECU. Available in Polished and Hard Core Gray finishes.

Features

  • Carburetor looks with the drivability of EFI.
  • Trouble-free performance eliminates vapor lock and fuel varnish problems.
  • Fits V8 engines from 250 to 600 horsepower.
  • Fully self-tuning: no laptop required.
  • Full-color, 3.5” LCD touch screen for basic and advanced tuning options.
  • Timing control option for GM Small Cap HEI and Ford TFI distributors.
  • Connections for Ford, GM, TH350, 700R4, and other transmission linkages.
  • Harness for GM electronic 4L60/4L80E transmissions.
  • Optional free software upgrade for full laptop control.
  • Plug-and-play harness with minimal connections.
  • Virtually maintenance free—keeps your vehicle reliable and ready to drive.
Holley (550-443): Terminator Stealth EFI Kit with GM Transmission Control
Holley (550-443): Terminator Stealth EFI Kit with GM Transmission Control

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

DONNIE HURT NAMED AAM GROUP™ EMPLOYEE OF THE YEAR

David Ayers Leave a comment
Use This Post Clip for Email

W.O.W. Award Recognizes Consistent, Demonstrated Excellence

September 2, 2016 (JOHNSON CITY, Tenn.) — The AAM Group™, the largest program distribution group in the SEMA marketplace, has named Marketing and Merchandising Specialist Donnie Hurt as the organization’s 2016 Employee of the Year and recipient of the W.O.W. Award. Hurt, who transitioned to AAM’s marketing team last year from PerformanceParts.com, has quickly become an integral part of AAM’s expanded suite of services, notably as email marketing lead and architect of the AAM Sign Shop™, which provides deeply discounted signage and display elements to program retailers and installers.

Given annually to the AAM Group™ employee who best exemplifies the qualities of commitment, creativity, initiative, and resourcefulness, the W.O.W. Award is named after Wilbur and Orville Wright, who embodied many of those same traits in their dogged pursuit to realize the world’s first successful controlled airplane flight.

“We are very pleased to have given this well-deserved honor to Donnie,” said AAM President Tim Odom. “He has embraced every responsibility he’s been given and not just done them well, but also meaningfully contributed to making the resources and services in which he is involved better. He well represents AAM’s team spirit, drive for excellence, and commitment to meeting the needs of our stakeholders. In the past year Donnie’s contributions have made AAM a better organization.”

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage with Parts Pro Performance Centers™: AIRAID MXP Cold Air Intake System

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro Performance Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we take a closer look at the MXP Air Intake System from AIRAID and install it on a 2015 Ford F-150

Parts used in this video:

AIRAID MXP Cold Air Intake System (401-338)

Want to check out more about AIRAID?
http://partspro.com/manufacturer/airaid

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

TIM ODOM DROPS GREEN FLAG AT NASCAR WHELEN ALL-AMERICAN LATE MODEL STOCK CAR RACE

David Ayers Leave a comment
Use This Post Clip for Email

Kingsport Speedway Event Saw Ronnie McCarty Capture His Fourth Win of the Season

AAM Group™ President Tim Odom had the honor of dropping the green flag on the NASCAR Whelen All-American Series late model stock car event held Friday, August 12 in Kingsport, Tennessee. The race additionally honored the late Gene Glover, winner of the 1979 NASCAR Late Model Sportsman national championship and the all-time title holder at the Kingsport Speedway.

Odom, who waived the flag for NASCAR official and AAM Program Sales Manager Jerry Simpson, got the 18-car field going on Back to School night, which saw children receive NASCAR Acceleration Nation school supplies. Defending champion Ronnie McCarty outmaneuvered a game field in his #5 car to pick up his fourth win of the season, followed in the final standings by Zeke Shell, Robbie Ferguson, Wayne Hale, and Justin Fontaine.

“I had a blast dropping the flag,” said Odom. “It’s a great feeling to be that near a pack of high-powered cars getting up to speed. Jerry taught me a great deal about the role of a flag person in a race, and I gained a great appreciation for all that figure does to contribute to fair competition, safety, and a better experience for the fans.”

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.