Tag: Black Diamond

PROFORM (67302): 750-cfm Black Race Series Carburetor

John Arnaud Leave a comment
Use This Post Clip for Email

Based on PROFORM’s Race Series, the new Black Race Series Carburetor includes a Black Diamond coating to reduce fuel temperature. Hand assembled in the United States using PROFORM’s high-flow carburetor main body, the Black Race carb features durable billet metering blocks, a high-performance billet throttle baseplate, and down-leg boosters dyno proven to generate more horsepower and torque.

The Black Race series of carbs delivers maximum airflow with no air horn, choke tower, or choke control, thanks to a high-rate airflow section design that leverages standard service and tuning components.

  • Solid billet construction.
  • Adjustable, screw-in air bleeds.
  • Adjustable secondary airflow cam bracket.
  • Button torx head throttle plate screws.
  • Power valve blowout protection.
  • Slip link mechanical secondary linkage.
  • Serviceable throttle levers and Ford kickdown.
  • Made in the USA.
PROFORM (67302): 750-cfm Black Race Series Carburetor
PROFORM (67302): 750-cfm Black Race Series Carburetor

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Quick Fuel (QFI-500BDM): QFi Master Kit with Black Diamond Finish

Donnie Hurt Leave a comment
Use This Post Clip for Email

This patent-pending master kit from Quick Fuel Technology combines the superior fuel atomization of a carburetor with the precise fuel control of EFI, boasting an 8-hole venturi sleeve with annular discharge booster to provide superior fuel atomization where air speed is highest and pressure is lowest. The result?  A faster and more efficient burn, more power, and better response. Fuel is also supplied below the throttle plates for increased stability and idle control.

The QFI-500BDM Master Kit includes TBI assembly, handheld controller, ECU, main wiring harness, fuel pump, fuel filter, fuel line, laptop cable, sensors, and hardware.

  • Designed for street and off-road vehicles, trucks, RVs, muscle cars, and more
  • Accommodates engines up to 525 hp
  • Dedicated idle circuit supplies fuel below the throttle plates for instant startups and increased throttle response
  • Adaptive ECU models volumetric efficiency of engine to calculate fuel requirements
  • Two programming options: handheld controller or laptop for increased tunability
  • Fuel delivery provided by four 66 lb./hr. injectors
  • On-board ignition driver eliminates need for aftermarket spark box
  • Timing control provided by ECU
  • Compatible with power adder technologies: wet flow NOx, superchargers, and turbochargers
  • Designed for 4150- and 4500-style flanges (P/N 300-4145-1AL adapter is required for 4500 flange)
  • Retains OEM sensors
  • Compatible with E85 fuel (up to 370 hp)
  • Ford kickdown lever kit available (P/N 50-5013)

    QFI-500BDM
    QFI-500BDM

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Quick Fuel (BD-450-VS): Black Diamond 450 CFM Four Barrel Carburetor

Donnie Hurt Leave a comment
Use This Post Clip for Email

Quick Fuel Technology’s new 450-CFM, 4-BBL carburetors for the street are designed for small-displacement 4-cylinder, 6-cylinder, and V-8 engines. They offer all the features found in QFT’s Slayer Series carburetors, including:

  • Side-hung / single-inlet fuel bowls
  • Changeable idle air and high-speed bleeds
  • 3-stage emulsion circuits in primary metering block
  • Changeable primary idle feed restrictions and power valve restrictions
  • QFT™ QuickSet™ vacuum secondary housing for external adjustment without changing springs
  • Notched secondary float for use with jet extensions
  • Secondary metering plate with changeable jets
  • Fully adjustable electric choke
  • Black Diamond® coating for enhanced appearance and durable finish

    Quick Fuel Technologies BD-450-VS
    Quick Fuel Technology BD-450-VS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Quick Fuel Technology: (701-1BD) Black Diamond Manifold

Donnie Hurt Leave a comment
Use This Post Clip for Email

Quick Fuel Technology’s 701-1BD Black Diamond® intake manifold is designed for square-bore carburetor applications on 1957-86 262-400 cid small block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, this manifold will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and bolt hole locations.

This 180° dual plane intake manifold is designed to provide the best performance for stock to street-performance engine applications to a maximum engine speed of 5,500 RPM.

This manifold comes with QFT’s exclusive Black Diamond high-temperature coating, which is impervious to underhood chemicals and fuels. The black satin finish is highly durable, reduces fuel temperature by 6%, and provides a showroom appearance.

Quick Fuel 701-1BD
Quick Fuel 701-1BD

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.