Tag: Camaro SS

Spectre Performance (90610K): Air Intake Kit for ’16-’19 Camaro SS 6.2L V8

David Ayers Leave a comment
Use This Post Clip for Email

Squeeze more horsepower and torque out of your Chevy Camaro while protecting it from damaging debris with an air intake kit from Spectre Performance. This easy-to-install kit comes with a washable, reusable, low-restriction Spectre Performance air filter; a black powder-coated aluminum air intake tube; and a matching steel heat shield to minimize engine heat entering your intake inlet.

The 90610K kit comes with the rubber boots, velocity stack, stainless steel clamps, and hardware you need to achieve an OE fit and finish.

Features

  • For 2016–2019 Chevrolet Camaro SS 6.2L V8
  • Increases horsepower and torque
  • Black powder-coated aluminum air intake tube
  • Powder-coated steel heat shield
  • Black Spectre Performance air filter
  • Installation time: 90 minutes
Spectre Performance Air Intake Kit for Camaro SS 90610K

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (252-381): MCAD Air Intake System for ’16-’19 Chevrolet Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

All-black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX synthetic filter give your Camaro SS a boost with increased torque and horsepower (up to 21.7 on the dyno). The AIRAID MCAD intake system removes the stock intake track on your vehicle and adds an open-element air inlet protected by cold air dam panels, protecting the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage; it’s also washable and reusable.

The 252-381 AIRAID MCAD intake system mounts in your Camaro’s factory location with no drilling required; in fact, installation typically clocks in at less than 90 minutes using standard hand tools.

Note: Not legal for sale or use in California.

Features

  • Increases horsepower and torque.
  • Replaces stock air box, air filter, and intake tubing.
  • Durable powder-coated finish.
  • Low-restriction aluminum intake tube.
  • Easy to install using standard tools.
  • Easy-to-clean, oil-free, reusable synthetic air filter.
  • Warranty: “NO-Hassle” lifetime limited.
AIRAID MCAD Air Intake System for Chevy Camaro SS 252-381

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Oil Cooler Kit for 2016+ Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

Owners of high-performance vehicles like the Camaro SS know that keeping engine oil temperatures in line is the key to long life and worry-free performance. This stainless steel engine oil cooler from Mishimoto helps you maintain optimal oil temperature and provide the best possible protection for your V8 components. Going beyond the liquid-to-liquid factory setup, Mishimoto’s liquid-to-air oil coolers mount behind your front bumper on application-specific brackets. Their huge 25-row stacked plates take full advantage of all the air flowing through the front end of your car.

Available in Sleek Silver or Stealth Black.

Features

  • For 2016+ Chevrolet Camaro SS.
  • Reduces oil temperatures by up to 40° F.
  • Application-specific mounting brackets.
  • Premade braided stainless steel oil lines with durable -AN fittings.
  • Billet aluminum oil sandwich plate or thermostatic oil sandwich plate.
  • 25-row stacked-plate oil cooler for optimal temperature.
  • Available in Sleek Silver or Stealth Black.
  • Warranty: lifetime.

Mishimoto Oil Cooler Kit for Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6350029): Dual-Mode Axle-Back Exhaust for ’16-’17 Camaro SS 6.2L with NPP Quad Tip

David Ayers Leave a comment
Use This Post Clip for Email

This new Elite Series axle-back exhaust system for the 2016–2017 Camaro SS with 6.2L V8 from Hurst gives you real sound options: either powerful, aggressive sound in Track mode or a mellow tone in Stealth mode. It’s specifically engineered to fit both coupe and convertible models with the factory NPP option (identified by quad tips) and features tandem Delta 40 and Outlaw mufflers and 4” polished stainless steel tips.

Made in America from 409S stainless steel, the Hurst 6350029 includes all necessary parts and installation hardware.

Note: Though the system itself clamps on, the OE system will require cutting to remove the factory mufflers.

Features

  • For 2016–2017 Chevy Camaro SS 6.2L V8 with NPP quad tips.
  • Dual-mode operation: Track and Stealth.
  • Functional exhaust valves work with OE actuator motors to select between sound levels.
  • Stainless steel construction.
  • Dyno tuned for maximum performance.
  • Made in the USA.

Hurst Dual-Mode Axle-Back Exhaust for Camaro 6350029

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual

David Ayers Leave a comment
Use This Post Clip for Email

Hurst’s new version of their popular Billet Plus shifter for the 2016 Chevy Camaro SS with 6-speed manual transmission (3916131) has all of the same performance benefits of the classic version—including a 40-percent reduction in shifter throw—but additionally features a black pistol grip–style handle similar to the Nitro Stick. This change adds a modern design element to these classically imagined cars.

Features

  • Reduces shift throw by 40%.
  • Machined billet aluminum construction.
  • Modern pistol grip design.
  • Black anodized finish.

Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual
Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Based on the platform-designed Blackheart line—engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality—is Hooker’s new Axle-Back Dual Transverse Dual Mode Exhaust System with Quad Tips for manual 2016 Chevy Camaro SS with 6.2L V8. It offers max dyno gains of +15.88 hp and 17.71 ft.-lb. torque by eliminating the restrictive factory mid-pipe where the exhaust tube is crushed.

70401319-RHKR uses dual polished 304 stainless steel, high-flow, straight-through transverse mufflers and exhaust valves that provide a pleasant driving experience at cruising speeds when closed and an aggressive, race-inspired tone when open. The system uses factory mounting points for ease of installation, while 4” dual-wall, angle-cut, polished stainless steel quad tips with laser-etched Hooker Blackheart logo offer unmatched styling.

Features

  • Fits manual 2016 Chevrolet Camaro SS V8 6.2L
  • Dyno gains of +15.88 hp and 17.7 ft.-lb. torque
  • Mandrel-bent 18-gauge polished stainless steel
  • Dual high-flow, straight-through transverse mufflers
  • 4” dual-wall, angle-cut quad tips
  • Built-in exhaust values emit different tones when open and closed
  • Eliminates restrictive factory mid-pipe
  • Quality welds for strength, longevity, and good looks
  • Uses factory mounting points for ease of installation and ground clearance
  • Backed by Hooker’s lifetime limited warranty

Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst (6350001): 2014-2015 Chevrolet Camaro SS 6.2L Cat-Back System

David Ayers Leave a comment
Use This Post Clip for Email

Hurst’s new Elite Series cat-back exhaust system for the 2014-2015 Camaro SS 6.2L V8 is constructed using the highest-quality materials and finest craftsmanship available today. Hurst Elite Series systems feature fully mandrel-bent 304s stainless steel tubing that has been custom designed and exclusively manufactured by industry-leading Flowmaster Inc. to ensure a precise fit every time! Hurst engineers then added an X-pipe crossover, which provides maximum scavenging, sound, and performance, and paired it with a set of fully polished 304s stainless steel Hurst mufflers. The mufflers use a high-thermal sound-absorption barrier with a large 3″ straight-through performance core that provides a deep, classic tone reminiscent of Hurst’s iconic heritage. The 4″ mirror-polished stainless steel tips, featuring laser-etched Hurst logos, finish off the system and put the world on notice that you’re serious about performance and style. You can take comfort and pride knowing that every Hurst Elite Series cat-back exhaust system is hand fabricated in the USA and backed by a Lifetime Limited Warranty.

Note: Does not fit models equipped with the “Dual Mode Exhaust/Quad Tip” option.

Hurst_6350001
Hurst_6350001

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.