Tag: chassis harness

Painless (20130): Direct-Fit 26-Circuit Harness for ’70-’72 Chevelle/Malibu

David Ayers Leave a comment
Use This Post Clip for Email

The 20130 direct-fit chassis harness for 1970–1972 Chevy Chevelle/Malibu from Painless provides provisions for connecting standard factory components plus everything you need for aftermarket components, including various pigtails and light sockets for mismatched cars (1971–1972 cars with 1970 front ends, or 1970 cars with 1971–1972 rear bumpers) and a 140-page manual with color schematics, photos, and step-by-step instructions.

The gauge cluster pigtail allows for the square “full sweep dash” harness and includes a Super Sport cluster pigtail, making it easy for those with a full sweep dash to later swap to an SS-style cluster by undoing one connector and plugging in the separate pigtail on the harness. This harness uses all of the same routing found on the factory harness, a design feature that lets you use existing attachment points. Painless even added extra length to the headlight section to allow it to be routed behind the driver-side inner fender for a cleaner look.

Features

  • Numerous components have the connectors and terminals preinstalled.
  • Exterior lights have the correct sockets and bulbs preinstalled.
  • Six-gauge charge wire and 100-amp MIDI fuse.
  • Fully integrated ground circuit.
  • 140+ page manual full of color schematics, photos, and step-by-step instructions.

Painless (20130): Direct-Fit 26-Circuit Harness for ’70-’72 Chevelle/Malibu

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro

David Ayers Leave a comment
Use This Post Clip for Email

With a continuous temperature rating of between -94° and 257° F and a melting point of 482° F, the PowerBraid from Painless Performance is engineered to enhance and protect the insulation of any electrical wire bundles or cables. In addition, it cleans up cluttered and unsightly engine bays. This kit is for use with any of the following second-generation Camaro harnesses: 20112, 20113, or 20114.

Made from tough-woven, flexible, and semi-rigid material, PowerBraid provides excellent drainage and maintains superior abrasion resistance. The split loom design has a minimum overlap of 25 percent, allowing for easy installation and optimal wiring protection. The 70923 kit includes multiple PowerBraids in various lengths and widths, plus heat shrinks, tie wraps, and rolls of electrical and stretch/seal tape.

  • Flexible, tough, semi-rigid protection for electrical wire bundles/cables.
  • Continuous temperature rating of -94° to 257° F.
  • Melting point: 482° F.
  • Split loom design with 25% overlap.
  • Includes various PowerBraids, heat shrinks, tie wraps, and tape.
  • Keeps engine compartment looking sharp.
Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro
Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (70920): PowerBraid Chassis Harness Kit

David Ayers Leave a comment
Use This Post Clip for Email

With a continuous temperature rating of between -94° and 257° F and a melting point of 482° F, the PowerBraid from Painless Performance is engineered to enhance and protect the insulation of any electrical wire bundles or cables. In addition, it cleans up cluttered and unsightly engine bays.

Made from tough-woven, flexible, and semi-rigid material, PowerBraid provides excellent drainage and maintains superior abrasion resistance. The split loom design has a minimum overlap of 25 percent, allowing for easy installation and optimal wiring protection. The 70920 kit includes multiple PowerBraids in various lengths and widths, plus heat shrinks, tie wraps, and rolls of electrical and stretch/seal tape.

  • Flexible, tough, semi-rigid protection for electrical wire bundles/cables.
  • Continuous temperature rating of -94° to 257° F.
  • Melting point: 482° F.
  • Split loom design with 25% overlap.
  • Includes various PowerBraids, heat shrinks, tie wraps, and tape.
  • Keeps engine compartment looking sharp.
Painless Performance (70920): PowerBraid Chassis Harness Kit
Painless Performance (70920): PowerBraid Chassis Harness Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Talking Performance with Painless

David Ayers Leave a comment
Use This Post Clip for Email

By John M. Arnaud

When the candy apple red Camaro pulled into our parking lot last week, we knew Painless Performance had arrived. Company President Adrian Murray and National Sales Manager Derek Love came into town to talk shop, marketing, and the promotion of their exciting new Trail Rocker product line.

This year Painless celebrated its 25th anniversary in the aftermarket industry. The company boasts the number-one-selling chassis harness in addition to a variety of fuel injection management systems and other electrical components. Long known for excellence in the classic car and truck sectors, the company is moving into new territory with the Trail Rocker for Jeep, an in-dash power center that allows off-road adventurers to control up to eight accessories from the safety of a waterproof housing.

Painless Performance Visits Parts Pro
Painless Performance Visits Parts Pro

This week of all weeks, Parts Pro is grateful to count Painless Performance as a valued partner. Thanks for coming down to see us…and here’s to an exciting 2016!

To plug into the latest products from Painless Performance, visit your local Parts Pro retailer. You can find an affiliated store using our dealer locator.

If you are a performance accessories retailer who would like to become part of the nationwide Parts Pro network, please join us today!

Tags: painless performance, trail rocker, chassis harness, efi, off-road, fuel injection, classic car, classic truck

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (10102): 21-Circuit Classic Customizable Chassis Harness – Non-GM-Keyed Column

David Ayers Leave a comment
Use This Post Clip for Email

This 21-circuit kit is Painless Performance’s most popular customizable chassis harness. You’ll find that it’s easily adaptable to almost any vehicle.

Included with this harness are a GM-engineered fuse block, Painless mounting bracket, GM turn signal connectors, and prewired headlight plugs and dimmer switch. Each wire is printed with circuit identification and uses GM color codes for easy installation.

Painless 10102
Painless 10102

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.