Tag: chevy

Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual

David Ayers Leave a comment
Use This Post Clip for Email

Hurst’s new version of their popular Billet Plus shifter for the 2016 Chevy Camaro SS with 6-speed manual transmission (3916131) has all of the same performance benefits of the classic version—including a 40-percent reduction in shifter throw—but additionally features a black pistol grip–style handle similar to the Nitro Stick. This change adds a modern design element to these classically imagined cars.

Features

  • Reduces shift throw by 40%.
  • Machined billet aluminum construction.
  • Modern pistol grip design.
  • Black anodized finish.
Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual
Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Auto Meter: Direct-Fit American Muscle Dash Kits

David Ayers Leave a comment
Use This Post Clip for Email

Upgrade your classic 60s, 70s, or early-80s muscle car or truck with an Auto Meter Direct-Fit American Muscle Dash Kit. Each easy-to-install kit includes a durable replacement dash panel, six iconic American Muscle gauges, a universal wiring harness, sending units, LED lighting dimmer, and all necessary mounting hardware. LED through-dial lighting ensures optimal visibility during low-light conditions while Auto Meter‘s easy, no-fab installation allows you to preserve the original interior of your classic ride.

More than a dozen models are available, including those for Camaro, Firebird, Nova, Chevelle, El Camino, Monte Carlo, Malibu, Challenger, Suburban, GM E-body and A-body, and more!

Features

  •  Simplicity: Takes the guesswork out of deciding what gauges to use—included pieces satisfy functionality and nostalgia.
  • Clean installation: Uses factory mounting locations and hardware—no cutting, drilling, or dash modification required.
  • Precision-molded, durable, and UV-protected ABS plastic replacement dash panel.
  • Six all-electric American Muscle gauges: tachometer, speedometer, water temperature, oil pressure, voltmeter, and OE-specific fuel level.
  • Universal 6-gauge wiring harness.
  • All necessary sending units and mounting hardware.
  • LED dimmer and installation instructions.
  • Made in the USA!
Auto Meter: Direct-Fit American Muscle Dash Kits
Auto Meter: Direct-Fit American Muscle Dash Kits

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Based on the platform-designed Blackheart line—engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality—is Hooker’s new Axle-Back Dual Transverse Dual Mode Exhaust System with Quad Tips for manual 2016 Chevy Camaro SS with 6.2L V8. It offers max dyno gains of +15.88 hp and 17.71 ft.-lb. torque by eliminating the restrictive factory mid-pipe where the exhaust tube is crushed.

70401319-RHKR uses dual polished 304 stainless steel, high-flow, straight-through transverse mufflers and exhaust valves that provide a pleasant driving experience at cruising speeds when closed and an aggressive, race-inspired tone when open. The system uses factory mounting points for ease of installation, while 4” dual-wall, angle-cut, polished stainless steel quad tips with laser-etched Hooker Blackheart logo offer unmatched styling.

Features

  • Fits manual 2016 Chevrolet Camaro SS V8 6.2L
  • Dyno gains of +15.88 hp and 17.7 ft.-lb. torque
  • Mandrel-bent 18-gauge polished stainless steel
  • Dual high-flow, straight-through transverse mufflers
  • 4” dual-wall, angle-cut quad tips
  • Built-in exhaust values emit different tones when open and closed
  • Eliminates restrictive factory mid-pipe
  • Quality welds for strength, longevity, and good looks
  • Uses factory mounting points for ease of installation and ground clearance
  • Backed by Hooker’s lifetime limited warranty
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hays: SFI Flexplates for Chevy, Ford, and Pontiac

David Ayers Leave a comment
Use This Post Clip for Email

Hays carries an extensive selection of heavy-duty flexplates for high-performance and competition Chevy, Ford, and Pontiac engines. Boasting a thicker-than-stock steel plate, these more robust flexplates can handle the force generated under higher torque and RPM conditions—which can crack the crankshaft hubs of factory stock plates.

Welded ring gears and dual bolt patterns add security and the flexibility to adapt to a variety of transmission-style torque converters. Hays flexplates are finished off with corrosion-resistant zinc-dichromate and are SFI certified under specification 29.1.

Features

  • SFI 29.1 certified
  • Available in externally and internally balanced options
  • Most feature a zinc dichromate finish for superior corrosion resistance and good looks
  • Heavy-duty design leverages thicker steel plate to withstand the stress of high-stall converters and high-RPM engines
  • Available for popular Chevy, Ford, GM LS, and Pontiac applications
Hays: SFI Flexplates for Chevy, Ford, and Pontiac
Hays: SFI Flexplates for Chevy, Ford, and Pontiac

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 3” 18-gauge stainless steel, the BlackHeart Cat-Back Exhaust with Dual Mode Mufflers NPP for 2014–2015 C7 Corvette from Hooker produces a mellow, throaty tone when the valve is closed and aggressive race attitude when the value is open. Notably, this product boasts a huge 3” bypass valve that uses the factory NPP actuator, as well as a Siamese X-pipe with increased scavenging for maximum performance gains. The system retains all factory catalytic converters (some cutting is required).

Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” twin-wall polished stainless tips with laser-etched Hooker logo. The 70501349-RHKR system uses factory mounting points to facilitate installation, while Hooker’s advanced tube geometry allows for straight-through performance and maximum ground clearance. All hardware is included.

  • Fits ’14–’15 C7 Corvette.
  • 3” 18-gauge stainless steel construction.
  • 4” twin-wall polished tips.
  • Straight-through, high-flow performance.
  • 3” bypass valve utilizes factory NPP actuator.
  • Retains all factory catalytic converters (cutting required).
  • Siamese X-pipe for increased scavenging.
  • Factory-style 3” AFM valves prevent check engine light engagement and reduce unwanted harmonics while in 4-cylinder mode.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: E-Force Supercharger System for 2016 Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

The new E-Force Supercharger from Edelbrock is a Stage 1 Street system that provides more horsepower and torque for your 2016 Chevy Camaro SS (auto: #1558, manual: #1559). How much more? The 1559 puts stock power up to 580 hp and 548 ft.-lb. of torque at the real wheels. That’s an extra 140 horsepower and 124 foot-pounds of torque!

These E-Force Superchargers are designed to work with all OEM emissions equipment, which will make them 50-state emissions legal (EO number pending). Combined with great looks (black powder-coated supercharger assembly and bright-red coil covers) and an incredible 3-year/36,000-mile warranty, that makes these systems a great choice for your daily driver.

Enthusiasts will appreciate the Eaton 2300 TVS rotor assembly, air-to-water twin intercooler system, and dual pass heat exchanger. Edelbrock has fine-tuned the performance via a unique runner design and an integrated bypass value, which help reduce parasitic loss under light throttle—thus improving potential fuel efficiency. And it all goes under the hood without any modification!

  • Stage 1 Street systems for manual (1559) and automatic (1558) ’16 SS Camaros.
  • Designed to work with OEM emissions equipment (EO number pending).
  • Black powder-coated supercharger assembly.
  • Bright red coil covers.
  • Eaton 2300 TVS rotor assembly.
  • No under-hood modification.
  • 3-year/36,000-mile warranty.
Edelbrock: E-Force Supercharger System for 2016 Camaro SS
Edelbrock: E-Force Supercharger System for 2016 Camaro SS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (141-830): Slant-Edge Air Cleaner for Chevrolet

David Ayers Leave a comment
Use This Post Clip for Email

With its head-turning raised emblem, this patent-pending Slant-Edge Air Cleaner for Chevrolet from PROFORM is the final component you need to finish your dress-up look. The 141-830 comes with a genuine 3” GM air filter element for maximum airflow plus all necessary mounting hardware.

Installation is easy: the air cleaner lid attaches to a short stud that is screwed into the center of the carburetor. The lid has a threaded boss underneath, and simply spins into place.

PROFORM technical note: After installation, lower the hood slowly to ensure a minimum of 3.75” exists from the top of the carburetor gasket to the underside of your hood.

  • Good-looking raised emblem.
  • Includes 3” GM air filter element and mounting hardware.
  • Easy to install.
PROFORM: (141-830): Slant-Edge Air Cleaner for Chevrolet
PROFORM: (141-830): Slant-Edge Air Cleaner for Chevrolet

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Trans-Dapt Performance (44062): Chevy S-10/SB Chevy V8 Swap-in-a-Box Kit

David Ayers Leave a comment
Use This Post Clip for Email

Stuffing an SB Chevy V8 or new-era LS motor into an S-10/S-15, Blazer/Jimmy, or Sonoma is a complex-yet-rewarding project. Doing the job yourself presents its own set of challenges, not the least of which is finding aftermarket components that work together to make the project run more smoothly.

Trans-Dapt Performance has partnered with Hedman and Hamburger’s Performance to create its Engine Swap-in-a-Box kit—the ultimate S-10 engine swap kit around. Each kit contains motor mounts/pads, a performance oil pan, and a complete set of Hedman hedders. The different kits vary only in regard to the included header; the 44062 contains Standard-Duty HTC-coated factory heads.

  • All parts designed to work together seamlessly.
  • Takes the guesswork out of component selection.
  • Includes motor mounts/pads, performance oil pan, and HTC-coated headers.
Trans-Dapt Performance (44062): Chevy S-10/SB Chevy V8 Swap-in-a-Box Kit
Trans-Dapt Performance (44062): Chevy S-10/SB Chevy V8 Swap-in-a-Box Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.