Tag: Cold Air Intake

AIRAID (451-356): MXP Performance Air Intake System for 2019 Ford Mustang GT 5.0L

David Ayers Leave a comment
Use This Post Clip for Email

The 451-356 AIRAID MXP performance air intake system delivers horsepower and acceleration gains (+16.5 HP on the dyno) for the 2019 Ford Mustang GT 5.0L. The roto-molded replacement air box addresses all the shortcomings of the restrictive factory design, with a premium AIRAID air filter for outstanding air flow and filtration.

This easy-to-install system directs air through a precision computer-modeled air intake tube constructed of cross-linked, high-density polyethylene designed to maintain proper mass air flow readings and calibration. An integrated velocity stack further promotes airflow.

Together, these features create a potent increase in airflow while maintaining proper air-to-fuel ratios (no recalibration needed after installation—just bolt it on and go!). Backed by AIRAID’s No Hassle Lifetime Warranty.

Note: Not legal for sale or use in California.

Features

  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter, and air box (where applicable).
  • Easy to install using commonly available tools
  • Easy-to-clean, oil-free synthetic air filter
  • Washable and reusable air filter media
  • Installation: 90 minutes with basic tools
  • Warranty: No Hassle Lifetime
AIRAID MXP Performance Air Intake System for 2019 Ford Mustang GT 5.0L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (250-274): MXP Performance Air Intake System for ’14-’19 Chevrolet Corvette 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

The 250-274 AIRAID MXP performance air intake system delivers horsepower and acceleration gains (12.13 HP on the dyno) for certain 2014–2019 Chevy Corvette 6.2L models. Its two-piece, roto-molded replacement air box addresses all the shortcomings of the restrictive factory design, with a premium AIRAID air filter for outstanding air flow and filtration.

This easy-to-install system directs air through a precision computer-modeled air intake tube constructed of cross-linked, high-density polyethylene designed to maintain proper mass air flow readings and calibration. The heat-shielded air intake tube and integrated velocity stack further promote airflow, with provisions for the factory mass air sensor and PCV lines.

Together, these features create a potent increase in airflow while maintaining proper air-to-fuel ratios (no recalibration needed after installation—just bolt it on and go!). Backed by AIRAID’s No Hassle Lifetime Warranty.

Note: Not legal for sale or use in California. Not compatible with 2015–2019 Z06 or 2019 ZR1 models.

Features

  • Red oiled premium air filter recommended for dusty, dry driving conditions.
  • Superior horsepower and acceleration gains.
  • Replaces stock intake tubing, air filter, and air box.
  • Easy to install using commonly available tools.
  • High-airflow washable and reusable air filter media.
  • MXP air box incorporates a window for filter inspection.
  • Installation: 90 minutes with basic tools.
  • Warranty: No Hassle Lifetime.
AIRAID MXP Performance Air Intake System for 14-19 Corvette 6.2L 250-274

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley (223-02): iNTECH Cold Air Intake for ’10-’15 Camaro 6.2L V8

David Ayers Leave a comment
Use This Post Clip for Email

Shipping July 7, the patent-pending 223-02 iNTECH cold air intake from Holley represents the highest level of technology, style, and performance for your 2010–2015 Chevy Camaro (5th generation) 6.2L V8. Dyno tests saw increases of 19.04 HP and 16.55 ft. lb. of torque with a broad power curve.  iNTECH sealed intakes feature a unique Slip-Seal housing–filter tube interface that eliminates the use of clamps and adapters to achieve a seamless installation, while the four-layer dry air filter eliminates the use of oils that can damage MAF sensors and trigger check engine lights.

Holley designed the housing to match your Camaro’s engine compartment, including retaining factory mounting locations to enable a simple installation.

Features

  • For 2010–2015 Chevy Camaro 6.2L V8.
  • +19.04 horsepower and +16.55 foot-pounds’ torque in dyno tests.
  • Slip-Seal interface eliminates the use of hose clamps and adapters.
  • One-piece, fully sealed intake housing design guarantees a true fresh-air intake charge.
  • Factory mounting locations allow for a simple, secure installation.
  • High-flow, washable, reusable 4-layer dry performance air filter.
  • Inner and outer aluminum mesh air filter media prevents filter deformation and rust.
  • Bellows-style silicone coupler at throttle body accommodates nitrous plates or throttle body spacers without cutting the tube.
  • Enhances the look of your engine bay with a stealthy appearance.
  • Stainless steel T-bolt clamps for maximum clamping force and durability.

Holley iNTECH Cold Air Intake for Camaro 223-02

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: MXP Cold Air Intake for ’12-’15 Supercharged Chevy Camaro ZL1

David Ayers Leave a comment
Use This Post Clip for Email

The MXP series cold air intake for 2012–2015 supercharged Chevrolet Camaro ZL1 with 6.2 liter engine from AIRAID features a large, one-piece, roto-molded air box that uses the OEM scoop, a massive 4.25” induction tube with billet aluminum MAF housing, premium AIRAID SynthaMax non-oiled air filter, and complete high-grade hardware. This product requires the use of aftermarket tuning due its low-restriction design, which funnels more oxygen-rich air into the engine.

Three color options are available: 251-308 (red filter), 252-308 (black filter), and 253-308 (blue filter).

Features

  • 25” induction tube with billet aluminum MAF housing.
  • Aftermarket tuning required.
  • Replaces stock intake tubing, air filter, and air box.
  • Three air filter colors: red, black, and blue.
  • Backed by AIRAID’s lifetime “no-hassle” warranty!

AIRAID MXP Cold Air Intake for Supercharged Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – K&N

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, K&N’s very own Bert Heck goes over their new cold air intakes for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – AIRAID

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, AIRAID’s very own Trent McGee goes over the new cold air intake applications they will be offering for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Flowtech headers offer the perfect combination of quality and value. These shorty headers fit the popular 2010–2014 Chevy Camaro with V8 6.2L engine and are a must if you’re using a cold air intake, cat-back exhaust system, or a tuner. With their silver-metallic ceramic coating, these 16-gauge headers offer increased strength and durability in addition to smooth flow and increased exhaust velocity. CARB E.O. pending!

  • Mandrel-bent tubes let your system breathe for increased power.
  • Smooth transition, 1-3/4” diameter primary tubes.
  • Unique-cast 2-1/2” collector for maximum strength.
  • TIG-welded, machined 3/8” header flange for a strong, leak-free seal.
  • Designed for a hassle-free installation; accommodate all factory OE components.
  • Premium aluminum header gaskets included.
  • Silver metallic ceramic coating.

Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L
Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (350-318): Cold Air Dam Intake for 2011-2015 Dodge Charger 5.7L

David Ayers Leave a comment
Use This Post Clip for Email

AIRAID’s 350-318 cold air dam (CAD) air intakes for the 2011-2015 Dodge Charger 5.7L are engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by CAD panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and use any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment by sealing to the underside of the hood via blade-style weather stripping. Some CAD systems connect to the factory air intake tube while others use a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and provides superior filtration. This CAD air intake is easy to install with common hand tools and is backed by AIRAID’s exclusive No-Hassle Lifetime Warranty.

AIRAID 350-318
AIRAID 350-318

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.