PROFORM (66831): Cylinder Head CC Kit

The 66831 PROFORM kit lets you accurately cc most cylinder head combustion chambers. Includes a precision glass 100cc burette with easy-to-read 0.2cc division lines, an integral petcock for precise measurement and easy flow control, a burette clamp, a stand with a firm base, a flat acrylic plate to cover the combustion chamber, and detailed instructions explaining how easy it is to professionally cc cylinder heads. One complete kit.

Features

  • 100cc burette reads in 2cc increments.
  • Integral pitcock for easy flow control.
  • Stand with base.
  • Flat acrylic plate covers cylinder head chamber.
  • One complete kit.

PROFORM Cylinder Head CC Kit 66831

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Performer RPM Hemi Gen III Cylinder Heads

Machined to be used on either the driver or passenger side of the block, Performer RPM cylinder heads for 2003+ Chrysler Hemi Gen III 6.1, 6.2, and 6.4L engines from Edelbrock are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories—including Hellcat components.

This bolt-on performance upgrade features fully CNC-machined combustion chambers and CNC-profiled bowls and port entries/exits to enhance airflow. Cast from A356 aluminum, heat treated to T6 specifications, and quality assembled by Edelbrock in the USA in Torrance, California.

Two part numbers available: 61109 (Bare Satin finish) and 61119 (Complete Satin finish).

Features

  • For 2003-to-present Chrysler Hemi Gen III 6.1, 6.2, and 6.4L.
  • More material in deck and combustion chambers for increased cylinder pressure.
  • Reinforced rocker bosses.
  • Extra material around intake/exhaust ports for porting during racing.
  • Factory-location intake/exhaust port flanges.
  • Increased seat diameters for improved heat transfer and durability over stock.
  • And much more!

Edelbrock Performer RPM Hemi Gen III Cylinder Heads

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: NHRA-Legal Cylinder Heads

Edelbrock cylinder heads are chock full of features not included in competing products, such as threaded inserts in rocker stud and exhaust bolt holes and manganese-bronze valve guides with ductile iron seats. And now they’ve been accepted for Stock and Super Stock use, noted by the NHRA oval logo engraved on both sides of the cylinder head (qualification varies by part number).

Made in the USA, Edelbrock cylinder heads offer improved performance throughout the RPM range for tremendous throttle response and top-end horsepower. Find one at your local Parts Pro™ expert using our Store Locator.

Edelbrock NHRA-Approved Cylinder Heads

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock (2052): Top End Kit for Hemi Gen II

The Top End Hemi Gen II Kit from Edelbrock is based on the popular Total Power package concept of combining dyno-matched components for dyno-tested and proven results. Edelbrock’s Power Package Top End Kits feature the best combination of high-quality performance components all in one box.

The 2052 Top End Kit for 426-572 Chrysler Hemi Gen II engines includes an Edelbrock Dual-Quad intake manifold, Victor Jr. cylinder heads, Rollin’ Thunder hydraulic roller camshaft, true roller timing chain, head bolts, and gasket set—everything you need for a complete installation.

Dyno testing of the 2052 produced 705 hp and 623 ft-lb of torque when matched with dual Performer series carburetors (#1405) on a 528 c.i.d. with 10:1 compression.

Features

  • Includes a Dual-Quad intake manifold (#7524), Victor Jr. cylinder heads (#61175), Rollin’ Thunder hydraulic camshaft (#2212), timing chain (#7805), head bolts (#8513), and head gasket set (#7349).
  • Rollin’ Thunder camshaft is designed for use with Chrysler 426-572 Hemi V8 engines.
  • Testing produced 705 hp and 623 ft-lb of torque on a 528 c.i.d. engine.
  • Made in the USA.
Edelbrock (2052): Top End Kit for Hemi Gen II
Edelbrock (2052): Top End Kit for Hemi Gen II

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock (79949): E-CNC 215 Cylinder Heads for Chevy LS1/LS2

Designed for 1997 and later GEN 3 and 4 LS1/LS2 Chevy engines, including 4.8L, 5.3L, 5.7L, and 6.0L. All E-CNC cylinder heads feature fully CNC-machined intake ports, combustion chambers, and exhaust ports for improved air-flow. Dyno tests proved these heads are capable of 457 hp and 438 ft-lb. of torque. High-quality conical beehive springs are secured with steel retainers and valve locks for performance up to .600″ valve lift. Match with any one of Edelbrock’s LS series intake manifolds and camshafts for a dyno-proven performance combination. E-CNC 215 head is 50-state street legal.

Features:

  • Combustion chamber volume: 65cc
  • Intake runner volume: 212cc
  • Exhaust runner volume: 76cc
  • Intake valve diameter: 2.02″
  • Exhaust valve diameter: 1.57″
  • Valve stem diameter: 8mm
  • Valve guides: manganese steel
  • Deck thickness: 5/8″
  • Valve spring diameter: 1.55″ / 1.30″
  • Valve spring maximum lift: .600″
  • Pushrod diameter: 5/16″
  • Valve angle: 15°
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x .750 reach, gasket seat

    Edelbrock_79949
    Edelbrock_79949

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.