Tag: EcoBoost

ARP (151-4301): ARP2000 Head Stud Kit for Ford EcoBoost 2.3L

David Ayers Leave a comment
Use This Post Clip for Email

With an optimized design, enhanced reliability, and reliable strength, the ARP2000 head studs available in ARP’s 151-4301 kit are the best you can get for your Ford EcoBoost 2.3L four-cylinder engine. The kit includes a set of 10 studs, parallel ground washers, 8740 chromoly 12-point nuts, and a 0.5 oz. pack of ARP Ultra-Torque fastener assembly lubricant.

The studs get their durability by being centerless ground and heat treated before thread rolling and machining. They are nominally rated at 220K PSI tensile strength and are reusable.

Features

  • For Ford EcoBoost 2.3L engines.
  • Nominally rated at 220,000 PSI tensile strength.
  • Centerless ground and heat treated prior to threading.
  • Includes 10 ARP2000 head studs, parallel ground washers, and 8740 chomoly 12-point nuts.
  • Bonus 1/2 oz. pack of ARP Ultra-Torque fastener assembly lubricant.

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Performance Intercooler Kit for 2015+ Ford Mustang EcoBoost

David Ayers Leave a comment
Use This Post Clip for Email

Developed by Mishimoto to combat hot air temperatures produced by turbocharged four-cylinder engines in 2015-and-up Ford Mustangs, the Performance Intercooler Kit includes both hot-side (2.5”) and cold-side (2.75”) mandrel-bent aluminum intercooler pipes—allowing you to upgrade the entire EcoBoost system at one time. This direct-fit intercooler unit requires no modification to your Mustang. It fits with the stock active grille shutters and mounts in the stock location so as to not inhibit airflow to the radiator or AC condenser.

Thanks to a 25% increase in internal core volume and 165% increase in external film area, the intercooler reduces intake temperatures by 35°F. It is available in Sleek Silver or Stealth Black, with wrinkle black or polished silver pipes, and is backed by Mishimoto’s lifetime warranty. CARB EO #: D-759.

Features

  • Direct fit for 2015+ Ford Mustang EcoBoost.
  • 35°F (19.45°C) reduction in ambient air temperature.
  • +58% core size, +25% internal core volume, and +165% external fin surface area.
  • Replaces hot-side and cold-side intercooler pipes and couplers.
  • Cast end tanks and in-tank diverter provide optimal flow through intercooler.
  • Stock location prevents airflow blockage to radiator and AC condenser.
  • Installs in less than 2 hours without removing front bumper cover.
  • Retains stock active grille shutters, maintaining ideal aerodynamics.
  • Bar-and-plate construction with all-aluminum TIG-welded end tanks.
  • CNC-machined BPV flange on hot-side pipe.
  • Two finishes: Stealth Black or Sleek Silver, with polished silver or wrinkle black pipes.
  • CARB EO #: D-759.

Mishmimoto Performance Intercooler Kit for 2015 and Up Ford Mustang EcoBoost MMINT-MUS4-15KPSL_1

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ACCEL: COP Coils for Ford 2.0L, 2.3L, and 3.5L EcoBoost

David Ayers Leave a comment
Use This Post Clip for Email

ACCEL is now offering high-quality, high-output coil-on-plug (COP) coils to EcoBoost owners! ACCEL SuperCoils feature up to 15 percent higher energy output over OE coils along with optimized windings, resistance, and turn ratios to unleash your engine’s maximum horsepower potential. ACCEL late-model Ford EcoBoost SuperCoils are available in traditional ACCEL yellow, and also in blue and black!

Features

  • Up to 15% more spark energy than OEM coils.
  • Improved throttle response and fuel efficiency.
  • High-temperature, vacuum-applied epoxy resists shock and vibration.
  • Installs in less than an hour.
  • Direct OEM replacement and ODB II compatible (will not trip an engine code).
  • Choice of yellow, blue, or black, depending on application.
  • Offered in singles and multipacks.

ACCEL: COP Coils for Ford 2.0L, 2.3L, and 3.5L EcoBoost

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (450-930): Modular Intake Tube for 2015 2.3L EcoBoost Mustang

David Ayers Leave a comment
Use This Post Clip for Email

Want more horsepower and torque for your 2015 2.3L EcoBoost Ford Mustang? AIRAID Modular Intake Tubes (MITs) provide a smooth airway to the throttle body, improving airflow up to an additional 400 cfm over restrictive stock intake tubes.

Constructed from cross-linked, high-density polyethylene and built to specification for your specific model, this MIT can be used to replace your stock air intake tube or added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions.

Not legal for sale or use in California.

  • Engineered to boost horsepower and torque.
  • Low-restriction, free-flowing intake tube.
  • Roto-molded, high-density polyethylene material.
  • Stainless steel clamps and silicone couplers/hump hoses included.
  • No-hassle lifetime warranty.

AIRAID (450-930): Modular Intake Tube for 2015 2.3L EcoBoost Mustang
AIRAID (450-930): Modular Intake Tube for 2015 2.3L EcoBoost Mustang

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – AIRAID

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, AIRAID’s very own Trent McGee goes over the new cold air intake applications they will be offering for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AEM Induction Systems (28-50029): DryFlow Air Filter for 2015 Ford Mustang

David Ayers Leave a comment
Use This Post Clip for Email

The AEM DryFlow 2015 Ford Mustang replacement air filter is designed to fit directly into the stock air filter box of 2.3L EcoBoost, 3.7L V6, and 5.0L V8 models. This reusable air filter is precision-engineered to be a direct air filter cross reference for the disposable factory air filter and installs in the factory air filter box in minutes. An AEM replacement DryFlow air filter is constructed using a durable urethane sealing lip to help ensure a positive, airtight seal to ensure high filtration efficiency.

AEM 28-50029
AEM 28-50029

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Airaid 450-930 Modular Intake Tube for 2015 Ford Mustang 2.3L EcoBoost

David Ayers Leave a comment
Use This Post Clip for Email

AIRAID Modular Intake Tubes (MIT) optimize airflow to the engine by replacing the factory intake tube. Factory tubes often have accordion-shaped walls, sound-canceling baffles, and undersized tube diameters, all of which hurt airflow. AIRAID MIT kits help straighten and improve airflow to the engine while having a larger opening with a reducer coupler at the turbo. This design enables the tube to easily accommodate future turbo upgrades with larger inlets. The design provides better throttle response and additional horsepower along with better fuel economy.

Airaid 450-930
Airaid 450-930

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.