Tag: f-150

Hypertech (730129): In-Line Speedometer Calibrator Module for 2021 GM Trucks

John Arnaud Leave a comment
Use This Post Clip for Email

Compatible with many 2021 year trucks, eight new speedometer calibration products have just rolled out from Hypertech. The 730129 in-line module, designed for 2021 GM 1500/2500/3500 and Colorado/Canyon, corrects speedometer readings with larger tires installed (up to 54”). This fully plug-and-play product easily connects above the driver’s kick panel in less than 5 minutes, and the module can be tucked out of the way while remaining accessible for recalibration down the road.

Other Hypertech modules are available for the following 2021 trucks: Ford F-150/-250/-350 (PN 730125), Ford Ranger (PN 3300), Toyota Tacoma (PN 730123), Toyota Tundra (PN 730119), Nissan Titan (PN 730126), Ram 1500/2500/3500 (PN 730133), and Jeep Wrangler/Gladiator (PN 3400).

Features

  • For 2021 GM 1500/2500/3500 and Colorado/Canyon
  • Corrects speedometer readings with up to 54” tires installed
  • Plug-and-play installation above driver’s kick panel
  • Installs in less than 5 minutes
  • Remains accessible for later recalibration
  • Other modules available for Ford, Toyota, Nissan, Ram, and Jeep

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Cloyes: Variable Valve Timing Chain Kits

John Arnaud Leave a comment
Use This Post Clip for Email

Available for Ford 3V 4.6 and 5.4L applications, variable valve timing (VVT) chain kits from Cloyes tested superior to their OE counterparts, exhibiting 20% less frictional drag and 10% more torque at the same oil pressure. Cloyes actuators use tightly toleranced, long-duration rotor vanes that eliminate the wear and drag experienced by comparable OE and other units. These VVT chain kits represent a complete repair solution for higher-mileage engines.

Features

  • Available for 2004–2010 Ford F-150, 2007–2010 F-250, and 2008–2010 F-350; 2005–2014 Ford Expedition; 2010–2014 Lincoln Navigator; and 2006–2010 Mercury Mountaineer.
  • Two parts numbers: 9-0391SBVVT and 9-0387SKVVT.
  • 20% less frictional drag and 10% more torque than OE actuators.
  • Tight-tolerance, long-duration rotor vane tip design.
  • No contact between rotor vane tips and stator for frictionless operation.
Cloyes Variable Valve Timing Chain Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products (17330): Replacement Single Pillar for 2017+ Ford Super Duty & 2015+ F-150

John Arnaud Leave a comment
Use This Post Clip for Email

AutoMeter Products has added to its lineup of Ford pillars with the 17330 replacement pillar with speaker opening for 2017-and-up Ford Super Duty and 2015-and-up F-150. Fabricated in America from durable composite material, this pillar allows for quick and easy installation of AutoMeter gauges. Now shipping!

Features

  • For 2015+ Ford F-150 and 2017+ Super Duty.
  • Clean OEM fit and finish.
  • Compatible with 2-1/16” AutoMeter gauges.
  • Provides an out-of-the-way, easy-to-view angle for gauge reading.
  • Paintable to match.
  • Includes mounting hardware.

AutoMeter Ford Pillar

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (5559): 1” Rear Anti-Sway Bar for 2015+ Ford F-150 Short Bed

John Arnaud Leave a comment
Use This Post Clip for Email

Compatible with Belltech’s 6446/6447 flip kits for 2015-and-up Ford F-150 pickups (all cabs, short bed), the 5559 1” rear anti-sway bar kit contains all the pieces required for installation. Available for order now!

Features

  • For 2015+ Ford F-150 short bed (all cabs).
  • 1” anti-sway bar for flipped axel.
  • Pairs with Belltech 6446 or 6447 flip kit.
  • Includes all components required for installation.

Belltech 1 Inch Rear Anti-Sway Bar for F-150 5559

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage with Parts Pro Performance Centers™: AIRAID MXP Cold Air Intake System

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro Performance Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we take a closer look at the MXP Air Intake System from AIRAID and install it on a 2015 Ford F-150

Parts used in this video:

AIRAID MXP Cold Air Intake System (401-338)

Want to check out more about AIRAID?
http://partspro.com/manufacturer/airaid

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (1000SP): Lowering Kit for 2015+ Ford F-150 Extended/Crew Cab Short Bed

John Arnaud Leave a comment
Use This Post Clip for Email

Designed to lower your truck +1” to -3” in the front and 5.5” in the rear, this all-new lowering kit from Belltech is just what you need to give your 2015–2016 Ford F-150 a low, aggressive stance. With all components required to properly lower your vehicle (including street performance shocks and flip kit), this Stage 3 kit fits Extended/Crew Cab short bed F-150s of the specified years.

Features

  • Fits 2015–2016 Ford F-150 (Ext/Crew Cab short bed).
  • Stage 3 complete solution.
  • +1” to -3” F/5.5” R.
  • Street performance shocks.

Belltech: Lowering Kit for 2015+ Ford F-150 Extended/Crew Cab Short Bed
Belltech: Lowering Kit for 2015+ Ford F-150 Extended/Crew Cab Short Bed

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – Powermaster

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Powermaster’s very own J.R. Richmond goes over their newest starters for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

DiabloSport (i2020): inTune i2 for Fords

John Arnaud Leave a comment
Use This Post Clip for Email

Since 2000, DiabloSport has been a major part of the Ford performance world. From their original performance chips to the Predator and then inTune, their Ford expertise means that simply installing the i2 programmer on your car or truck guarantees huge power gains. DiabloSport has been tuning the Mustang and F-150 longer than just about anybody—and the driving experience you will get from the i2 tuner will prove it.

This tuner is easy to install and plugs right into your vehicle’s OBD-II port. DiabloSport’s tuning team has mapped all of the i2’s tunes for your exact car or truck. The goal is to offer the biggest power gain through the largest choice of performance options. The i2 features the latest electronics, too; find out more about what makes the i2 the best handheld tuner available today!

If you have popular performance mods on your Mustang or F-150 like a cold air intake, exhaust, heads, cam, or even supercharger, the i2 gives you options to take control of your tune. Whether you want to tweak the tune yourself or bring it to a professional tuner, the i2 has you covered no matter how aggressive you want your build to be!

The new inTune i2 allows for a first from DiabloSport: you can now tune more than one vehicle by purchasing a tuning license. If you have the i2020 for your 2015 Mustang, but you also want to tune your 2014 F-150, you can get a license that lets you to tune both!

Diablosport i2020
Diablosport i2020

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.