Tag: ford

Trans Dapt Performance: PerfectMatch Engine Dress Up Kits

John Arnaud Leave a comment
Use This Post Clip for Email

PerfectMatch engine kits from Trans Dapt Performance deliver everything for harsh under-hood environments along with the best factory color matching on the market for your classic Ford or Chevy project. These quality powder-coated engine dress-up kits add finish and detail, giving your bay a quick, easy, and show-worthy appearance. Including valve covers, a timing cover, water neck, breathers, and necessary gaskets and hardware, PerfectMatch engine kits from Trans Dapt are a “perfect match” for your classic small-block Chevy, big-block Chevy, or small-block Ford project.

Features

  • For SBC, BBC, or SB Ford applications.
  • Powder coated and factory color matched.
  • Includes a timing cover, water neck, breathers, valve covers, and necessary hardware/gaskets.

Trans Dapt PerfectMatch Engine Accessory Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NOS (02125NOS): Complete Nitrous Kit for ’11-’17 Ford Mustang with Coyote Engine

John Arnaud Leave a comment
Use This Post Clip for Email

This complete wet nitrous kit from NOS for 2011–2017 Ford Mustang with Coyote engine includes NOS’s mini two-stage progressive controller for exceptionally smooth power delivery. The billet 6061-T6 aluminum plate is anodized black for great looks under the hood. NOS has included a stainless steel solenoid bracket with custom bent hard lines for that professionally installed look.

Features

  • For 2011–2017 Ford Mustang with Coyote V8 engine.
  • Fits both standard and 302 Boss manifolds.
  • Provides exceptionally smooth power delivery.
  • Black-anodized 1/2” 6061-T6 aluminum.
  • Single 1/2” plate between the throttle body and manifold.
  • Supports up to 250 rear wheel horsepower (RWHP).
  • Includes jetting for 75, 100, 125, and 150 RWHP.
  • Includes a 10 lb. “NOS Blue” nitrous bottle with brackets.
  • Includes a NOS mini 2-stage progressive controller (15974NOS).
  • Also available as a “plate only” kit (13125NOS).

NOS Complete Nitrous Kit for Ford Coyote 02125nos

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M (22200): Locking Transmission Dipstick for Ford

John Arnaud Leave a comment
Use This Post Clip for Email

Fitting Ford 10R80, 6R80, 4R75E, and 4R70E transmissions, the 22200 locking transmission dipstick from B&M allows for a quick and easy DIY check of your automatic transmission fluid level. The dipstick, constructed from billet stainless steel and T6 aluminum, is meant to be left in your vehicle and locked in place and lets you monitor transmission fluid whether it’s cold or warm.

Features

  • For Ford 10R80, 6R80, 4R75E, and 4R70E transmissions.
  • Steel braided dipstick/fluid fill tube.
  • Stamped transmission fluid level indicator.
  • Knurled, B&M-engraved locking cap.
  • Billet stainless steel and 6061-T6 aluminum construction.

B&M Locking Transmission Dipstick for Ford 22200

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Performance Intercooler Kit for 2015+ Ford Mustang EcoBoost

John Arnaud Leave a comment
Use This Post Clip for Email

Developed by Mishimoto to combat hot air temperatures produced by turbocharged four-cylinder engines in 2015-and-up Ford Mustangs, the Performance Intercooler Kit includes both hot-side (2.5”) and cold-side (2.75”) mandrel-bent aluminum intercooler pipes—allowing you to upgrade the entire EcoBoost system at one time. This direct-fit intercooler unit requires no modification to your Mustang. It fits with the stock active grille shutters and mounts in the stock location so as to not inhibit airflow to the radiator or AC condenser.

Thanks to a 25% increase in internal core volume and 165% increase in external film area, the intercooler reduces intake temperatures by 35°F. It is available in Sleek Silver or Stealth Black, with wrinkle black or polished silver pipes, and is backed by Mishimoto’s lifetime warranty. CARB EO #: D-759.

Features

  • Direct fit for 2015+ Ford Mustang EcoBoost.
  • 35°F (19.45°C) reduction in ambient air temperature.
  • +58% core size, +25% internal core volume, and +165% external fin surface area.
  • Replaces hot-side and cold-side intercooler pipes and couplers.
  • Cast end tanks and in-tank diverter provide optimal flow through intercooler.
  • Stock location prevents airflow blockage to radiator and AC condenser.
  • Installs in less than 2 hours without removing front bumper cover.
  • Retains stock active grille shutters, maintaining ideal aerodynamics.
  • Bar-and-plate construction with all-aluminum TIG-welded end tanks.
  • CNC-machined BPV flange on hot-side pipe.
  • Two finishes: Stealth Black or Sleek Silver, with polished silver or wrinkle black pipes.
  • CARB EO #: D-759.

Mishmimoto Performance Intercooler Kit for 2015 and Up Ford Mustang EcoBoost MMINT-MUS4-15KPSL_1

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker BlackHeart: 304 SS Long-Tube Headers for ’79-’93 Ford Mustang LS Swap

John Arnaud Leave a comment
Use This Post Clip for Email

Doing an LS swap for your 1979–1993 Ford Mustang with Fox body? Hooker BlackHeart has your long-tube headers, which provide excellent ground and component clearance and are designed specifically to work with Hooker BlackHeart transmission crossmembers and engine mounts for a trouble-free installation. Constructed from 18-gauge, mandrel-bend 304 stainless steel for maximum strength and durability and backed by a limited lifetime warranty. All hardware included. Ask for part number 70101350-RHKR.

Features

  • Lightweight, 18-gauge, mandrel-bent stainless steel.
  • 1-7/8” primary tubes and long-transition 3” collectors with merge spears for maximum flow and increased exhaust velocity.
  • 3/8” thick, CNC-waterjet header flanges for strength and maximum sealing surface.
  • Compatible with stock or multiple validated aftermarket engine K-members.
  • Compatible with the stock steering shaft/rag joint coupler (stock K-member only) and aftermarket steering shafts.
  • Designed to work specifically with Hooker BlackHeart transmission crossmembers and engine mounts.
  • Hand-welded construction for strength, longevity, and good looks.
  • Tube geometry designed for maximum clearance and hassle-free installation.
  • All hardware included.
  • Warranty: limited lifetime.

Hooker BlackHeart Long Tube Headers for Mustang LS Swap 70101350-RHKR

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Heavy-Duty Protection Bundle for ’08-’10 Ford 6.4L Power Stroke

John Arnaud Leave a comment
Use This Post Clip for Email

Say goodbye to leaking stock radiators and hoses, faulty thermostats and radiator caps, and weak upper support bars: the MMB-F2D-002 heavy-duty protection bundle from Mishimoto includes everything you need to make sure your cooling system is as tough as the rest of your Ford.

In addition to Mishimoto’s fully aluminum performance radiator and sturdy steel upper support bar, this bundle includes high-temp and low-temp thermostats, a reservoir tank cap, and silicone coolant hoses. Mishimoto engineered and tested everything to be a direct fit with the 6.4L Power Stroke in your 2008–2010 Ford while providing greater durability and performance.

Features

  • Direct fit for 2008–2010 Ford 6.4L Power Stroke.
  • Upper support bar minimizes front-end flex.
  • Aluminum radiator incorporates internally strutted tubes in the top and bottom eight rows to better resist pressure and temperature.
  • Coolant hoses are constructed from five layers of heat-resistant fibers and silicone and come preassembled with CNC-machined couplers.
  • High-temp and low-temp thermostats let you tailor the cooling system for cold or hot environments.
  • 1 bar (16 PSI) overflow reservoir cap raises the boiling point of engine coolant to provide a safer and more efficient cooling system.
  • Warranty: lifetime.

Mishimoto Heavy Duty Protection Bundle for Ford 6.4L Power Stroke

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Energy Suspension (4.1137): Polyurethane Motor and Transmission Mount Set for Early Small-Block V8 Ford

John Arnaud Leave a comment
Use This Post Clip for Email

Energy Suspension has just what you need to stabilize your Ford or Lincoln drivetrain and experience power-to-the-ground performance: its 4.1137 polyurethane motor and transmission mounts. These durable mounts are more compliant than solid mounts and help prevent costly drivetrain damage by stabilizing your engine and transmission. The race-proven, driver-friendly Hyper-Flex polyurethane is mounted between zinc-plated metal brackets to outlast and outperform OE rubber replacement mounts. Change in NVH may occur. Available in Red and Black.

Application List

  • 1964–1970 Ford Fairlane
  • 1966–1970 Ford Falcon
  • 1967–1972 Ford Mustang
  • 1966–1971 Ford Ranchero
  • 1968–1971 Ford Torino
  • 1966–1967 Mercury Comet
  • 1967–1972 Mercury Cougar
  • 1969–1973 Mercury Montego

Energy Suspension Polyurethane Motor and Transmission Mount Set for Early SB Ford

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products (17330): Replacement Single Pillar for 2017+ Ford Super Duty & 2015+ F-150

John Arnaud Leave a comment
Use This Post Clip for Email

AutoMeter Products has added to its lineup of Ford pillars with the 17330 replacement pillar with speaker opening for 2017-and-up Ford Super Duty and 2015-and-up F-150. Fabricated in America from durable composite material, this pillar allows for quick and easy installation of AutoMeter gauges. Now shipping!

Features

  • For 2015+ Ford F-150 and 2017+ Super Duty.
  • Clean OEM fit and finish.
  • Compatible with 2-1/16” AutoMeter gauges.
  • Provides an out-of-the-way, easy-to-view angle for gauge reading.
  • Paintable to match.
  • Includes mounting hardware.

AutoMeter Ford Pillar

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster FlowFX Cat Back Exhaust for Mustang 4.6 and 5.4L

Flowmaster (717460): FlowFX Axle-Back Exhaust System for ’05-’10 Mustang 4.6 & 5.4L

John Arnaud Leave a comment
Use This Post Clip for Email

FlowFX axle-back exhaust systems provide moderately aggressive exterior and interior sound levels with all of the performance benefits you’ve come to expect from Flowmaster. The 717460 system, designed for 4.6 and 5.4L Mustang, features new, bright, and mandrel-bent 2.5” 409 stainless steel tubing; Flowmaster’s new FlowFX straight-through mufflers with large 3” inch core; and polished 4” stainless steel tips embossed with the Flowmaster logo. Designed for easy installation, this system includes all necessary parts, hardware, and detailed instructions. Manufactured in the USA.

For 2005–2010 Ford Mustang GT, GT500, California Special, coupes and convertibles with 4.6L or 5.4L V8 engine.

Features

  • Dyno-tuned for maximum performance.
  • Bright, mandrel-bent stainless steel.
  • Moderately aggressive sound.
  • Made in the USA.

Flowmaster FlowFX Cat Back Exhaust for Mustang 4.6 and 5.4L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (12146FLT): Stainless Steel Axle-Back Exhaust System for ’15-’17 Mustang GT V8 5.0L

John Arnaud Leave a comment
Use This Post Clip for Email

With its 2.5” diameter polished 304 stainless steel construction, the 12146FLT axle-back exhaust system for 2015–2017 Ford Mustang GT from Flowtech combines premium fitment and maximum performance to coax the most out of your 5.0L engine. The high-flow, straight-through design offers an aggressive exhaust tone, while the carefully calibrated tube geometry and use of OEM mounting points facilitate a hassle-free installation.

Note: Installation requires cutting; Flowtech recommends the use of a professional technician.

Features

  • 2-1/2″ diameter polished 304 stainless steel.
  • High-flow, straight-through mufflers.
  • Aggressive exhaust tone.
  • 4” polished dual-wall exhaust tips.
  • Quality welds for strength, longevity, and good looks.
  • Tube geometry designed for hassle-free installation.
  • Uses OEM mounting points for factory-like fitment.

Flowtech SS Axle Back Exhaust for Mustang GT 12146FLT

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.