Tag: lifted truck

Belltech (153712TP): 6”-8” Lift Kit for 2019+ Ram 1500

John Arnaud Leave a comment
Use This Post Clip for Email

The only currently available kit that can provide 6”–8” of lift for 2019-and-up Ram 1500, this Belltech lift kit fits all cabs except classic body. Engineered from the highest quality materials right here in the USA, the 153712TP kit is designed to provide the best ride of any suspension lift kit on the market.

Features include Belltech’s patented front Trail Performance adjustable struts; an all-new rear control arm drop-down bracket to maintain the 1500’s “anti-squat” and OE rear axle and suspension geometry; and new high-clearance cross-members, alignment cam bolts, and a billet-aluminum driveshaft spacer. Allows for up to 37” tall tires even at the lowest 6” lift setting.

Features

  • For 2019+ Ram 1500 (all cabs except classic body)
  • 6”–8” of vertical lift
  • Patented Trail Performance adjustable struts
  • All-new rear control arm drop-down bracket
  • High-clearance cross-members
  • New alignment cam bolts and billet-aluminum driveshaft spacer
  • Up to 37” tall tires even at lowest 6” setting
  • Engineered in the USA
Belltech 6-8 Inch Lift Kit for 2019+ Ram 1500

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech (26015): Trail Performance Struts for ’16-’20 Toyota Tacoma 4WD

John Arnaud Leave a comment
Use This Post Clip for Email

Level your 2016–2020 Toyota Tacoma 4WD and amp up its suspension control with Trail Performance Struts from Belltech. With the 26015 kit, you’ll not only enjoy improved performance and safety but also the ability to lift your Tacoma’s ride height up to 2” in half-inch increments—all from the same part!

Thanks to a combination of low-speed compression and rebound characteristics, these Belltech Trail Performance Struts produce a great balance of everyday driving comfort and the spirit to tackle adventurous trails.

Features

  • For 2016–2020 Toyota Tacoma 4WD
  • Patented adjustable struts (from OEM stock to a true 2” lift, in 0.5” increments)
  • Performance sport ride and improved overall handling
  • Progressive rate polymer bumpstop
  • Adjustable packer design to dial in proper bumpstop engagement
  • Reduces body roll, dive, underbraking, and squat under acceleration
  • Retains OEM droop travel
  • Vulcanized OEM-style lower bushing with increased durometer
Belltech Trail Performance Struts for 16-20 Toyota Tacoma 4WD 26015_2
Belltech Trail Performance Struts for 16-20 Toyota Tacoma 4WD 26015

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: 6”-8” Suspension Lift Variations for ’07-’18 GM 1500 4×4

John Arnaud Leave a comment
Use This Post Clip for Email

Get the lift and handling your GM 1500 4×4 has been waiting for with a Belltech suspension lift kit. These direct bolt-on kits offer front-height adjustable Trail Performance struts and rear Trail Performance twin-tube shocks, and install with minimal cutting and no welding required. Your 2007–2018 GM pickup will become more capable without sacrificing quality or factory driving performance.

Belltech has given these suspension lift kits a new front crossmember that relocates the pivot points of the lower control arm and retains the proper LCA angle while maintaining maximum ground clearance. Lift spindles correct ball joint working angles and eliminate bumpsteer, while the ride height–adjustable struts and matching rear shocks ensure the correct bump and droop travel for the new height.

Available Parts

  • 2007–2016 GM 1500 4×4: 150201SPS, 150201SP, 150201BK
  • 2016–2018 GM 1500 4×4: 150203SPS, 150203SP, 150203BK

Features

  • For 2007–2018 Chevy Silverado and GMC Sierra 4×4
  • New front crossmember relocates LCA pivot points to retain proper angle.
  • Lift spindles correct ball joint working angles and camber curve.
  • Outer tie rod mounting location minimizes bumpsteer.
  • Custom-valved, ride height–adjustable, twin-tube Trail Performance struts
  • Rear Trail Performance shocks provide correct bump and droop travel for new height.
  • Two-piece front differential drop provides for proper pinion angle, full CV joint articulation, and drive shaft angularity.
  • Quarter-inch, laser-cut steel skid plate protects the front differential.
  • Direct bolt-on installation (minimal cutting and no welding required)
  • Includes step-by-step instructions
Belltech 7-8 Inch Suspension Lift Variants for 07-18 GM 1500 4x4

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech: 4” Lift Kits for ‘07-’20 GM 1500 4WD

John Arnaud Leave a comment
Use This Post Clip for Email

Elevate your Chevrolet Silverado or GMC Sierra 4×4 with a 4” suspension lift kit from Belltech. Three new precisely engineered kits (150212SP for 2019–2020 models, 150200SP for 2016–2018 Ext/Crew Cab models, and 150207SP for 2007–2016 Ext/Crew Cab models) include custom-designed, front-height adjustable Street Performance struts and rear Street Performance Twin Tube shocks. These Belltech kits not only improve your ride quality but also retain factory alignment specifications and adjustment cams.

Unlike with most lift kits, these Belltech packages prioritize front-end steering geometry to avoid sacrificing the factory turning radius. As always, Belltech also delivers quality parts, including heavy-duty black-zinc hardware and 1/4” thick steel brackets. Finally, these kits are designed for an easy installation: they are direct bolt-on solutions that require no cutting or welding.

Features

  • For 2007–2020 Chevy Silverado and GMC Sierra 1500 4WD trucks
  • Provides 4” of lift
  • Custom-designed, front-height adjustable Street Performance struts
  • Rear Street Performance Twin Tube shocks
  • Retains factory turning radius
  • Heavy-duty black-zinc hardware
  • Easy, bolt-on, no-drill, no-weld installation
  • Warranty: lifetime
Belltech 4 Inch Lift Kits for 07-20 GM 1500 4WD

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.