Tag: muffler

Flowmaster (817845): Cat-Back 409S Outlaw Exhaust Kit for ’17-’18 Dodge Charger R/T and Daytona with 5.7L Engine

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re looking for aggressive exterior and interior sound for your 2017–2018 Dodge Charger R/T or Daytona with 5.7L engine, the Outlaw cat-back exhaust system is your pick. Perfect for drivers unafraid of the extra attention this system is sure to draw, the Flowmaster 817845 kit features 3” 409 stainless steel, mandrel-bent tubing; a pair of race-inspired Outlaw Series mufflers; and a 3” Scavenger Series X-pipe for maximum performance. The tailpipes include active exhaust valves and are finished with 4” stainless steel tips that exit the factory exhaust cutouts.

Designed for an easy fit, this Flowmaster system includes all necessary parts, hardware, and installation instructions. Manufactured in the USA.

Features

  • For 2017–2018 Dodge Charger R/T and Daytona with 5.7L engine and standard bumper cutout.
  • Dyno-tuned for maximum performance.
  • 409 stainless steel construction.
  • Easy installation.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster Cat Back 409S Exhaust Kit for Charger RT and Daytona 817845

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717831): FlowFX Cat-Back Exhaust Kit for ’11-’14 Charger R/T & Chrysler 300C

John Arnaud Leave a comment
Use This Post Clip for Email

The FlowFX Cat-Back Exhaust Kit is perfect for Charger R/T and Chrysler 300C (with 5.7L Hemi) owners who want moderately aggressive exterior and interior sound levels with uncompromised Flowmaster performance benefits.

The 717831 kit includes mandrel-bent 2.5” 409 stainless steel tubing, Scavenger X-Pipe crossover, and a pair of FlowFX straight-through mufflers with 2.5” polished stainless steel tips that exit from the factory exhaust bezel.

Easy to install, this made-in-America system includes all necessary parts, hardware, and instructions.

Features

  • For 2011–2014 Dodge Charger R/T and Chrysler 300C with 5.7L Hemi.
  • Provides a moderately aggressive exterior and interior tone.
  • Dyno tuned for maximum performance.
  • 409 SS construction.
  • Scavenger X-Pipe crossover.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster, FlowFX Cat-Back Exhaust for Charger and 300C 717831

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster: FlowFX Straight-Through Mufflers

John Arnaud Leave a comment
Use This Post Clip for Email

FlowFX series mufflers from Flowmaster deliver a moderate performance sound level for enthusiasts who desire a different exhaust tone than the “chambered” sound Flowmaster made famous. FlowFX mufflers are made from fully welded stainless steel with all the quality the company is known for.

Features

  • Durable, fully welded 409 SS.
  • Moderate exterior performance tone.
  • Straight-through design.
  • Warranty: 1 year limited.

Flowmaster FlowFX Straight Through Muffler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech: Raptor Chambered Mufflers

John Arnaud Leave a comment
Use This Post Clip for Email

The new Flowtech Raptor line of chambered mufflers features a welded-baffle design for deep, throaty exhaust notes; increased performance; and better fuel economy. Designed specifically for street and high-performance applications, they’re available with 2.00-, 2.25-, 2.50-, and 3.00-inch inlet/outlet openings and feature a compact 13” x 9” x 4” case with numerous inlet/outlet options to fit literally hundreds of different vehicles.

Made from aluminized steel, these Raptor chambered mufflers are MIG welded for durability. They also reduce interior resonance/exhaust drone and supply a deep exhaust growl at full throttle.

Features

  • Quietest of Flowtech’s chambered mufflers.
  • Noticeable reduction in interior resonance and exhaust drone.
  • Aluminized steel construction with MIG-welded seams.
  • Available in 2.00”, 2.25”, 2.50” and 3.00” inlet/outlet openings.
  • Compact 13” x 9” x 4” case design.
  • Various inlet/outlet options compatible with hundreds of vehicles.

Flowtech Raptor Chambered Muffler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51605FLT): 2.25” SS Axle-Back Exhaust for ’16-’18 Camaro 2.0/3.6L

John Arnaud Leave a comment
Use This Post Clip for Email

The 51605FLT axle-back exhaust system from Flowtech is engineered to provide premium fitment and maximum performance for your 2016–2018 Chevy Camaro with 2.0L or 3.6L engine. The system is anchored by 2.25” polished stainless steel, with matching high-flow, straight-through mufflers that offer aggressive sound without the unwanted drone. Not for use with applications that have dual-mode exhaust (NPP).

Features

  • 25″ diameter polished stainless steel for maximum strength and durability.
  • Matching high-flow, straight-through mufflers for aggressive sound without the drone.
  • 4” polished 304 stainless steel dual-wall exhaust tips.
  • Quality welds for strength, longevity, and good looks.
  • Tube geometry designed for hassle-free installation.
  • Uses OEM mounting points for factory-like fitment.
  • For applications without dual mode exhaust (NPP).

Flowmaster 2.25 SS Axle Back Exhaust for 16-18 Camaro 2.0 or 3.6L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (717778): FlowFX Cat-Back Exhaust System for 2017 Charger R/T

John Arnaud Leave a comment
Use This Post Clip for Email

The 717778 FlowFX cat-back exhaust system for 2017 Dodge Charger R/T with 5.6 V8 Hemi produces an aggressive exterior and interior sound level with all of the performance benefits you expect from Flowmaster. New features include bright 409S stainless steel tubing; a pair of Flowmaster’s new FlowFX straight-through mufflers with a large 3.00 inch core for maximum performance; and a deep, aggressive sound.

Flowmaster’s system uses a 3.00 inch Scavenger X-pipe cross-over and mandrel-bent tubing for maximum performance. It’s then finished off with 3.00 inch stainless steel tips that exit within the factory exhaust tips in the rear bumper valance. The two-piece tailpipes are designed to reuse the factory exhaust valves.

Features

  • Straight-through performance mufflers and sound.
  • Bright 409s stainless steel tubing and mufflers.
  • Scavenger X-pipe cross-over.
  • Reuses factory exhaust valves.
  • Includes all necessary parts, hardware, and instructions.
  • Made in the USA.
  • Warranty: lifetime limited.

Flowmaster FlowFX Cat Back Exhaust for 2017 Charger 717778

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (15430): 3” Outlaw Race Muffler

John Arnaud Leave a comment
Use This Post Clip for Email

The new 3-inch Outlaw Race Muffler from Flowmaster is perfect for race classes that require mufflers but that do not have a set sound-reduction rule. The 15430 muffler sports a 4-inch diameter body that is 10.5 inches long. It’s crafted from 16-gauge aluminized steel right here in the USA.

Features

  • 3” in/out
  • Aluminized steel construction.
  • Aggressive performance tone.
  • Race-proven engineering.
  • Made in the USA.
Flowmaster (15430): 3” Outlaw Race Muffler
Flowmaster (15430): 3” Outlaw Race Muffler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (42542): Original 40 Series Muffler

John Arnaud Leave a comment
Use This Post Clip for Email

The Original 40 Series muffler from Flowmaster delivers an aggressive exterior and interior tone. If you’ve been looking to add the iconic Flowmaster sound to your ride, this is the muffler for you! The 42542 is made from 16-gauge aluminized steel and is fully MIG welded for maximum durability.

Note: Universal muffler; not a direct fit (some adaptation required).

Features

  • Durable, fully welded 16-gauge aluminized steel.
  • Aggressive exterior exhaust tone.
  • Notable interior resonance.
  • 5” in (C) / out (O).
  • Excellent street/strip and off-road performance.
  • Made in America.
Flowmaster (42542): Original 40 Series Muffler
Flowmaster (42542): Original 40 Series Muffler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

John Arnaud Leave a comment
Use This Post Clip for Email

Based on the platform-designed Blackheart line—engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality—is Hooker’s new Axle-Back Dual Transverse Dual Mode Exhaust System with Quad Tips for manual 2016 Chevy Camaro SS with 6.2L V8. It offers max dyno gains of +15.88 hp and 17.71 ft.-lb. torque by eliminating the restrictive factory mid-pipe where the exhaust tube is crushed.

70401319-RHKR uses dual polished 304 stainless steel, high-flow, straight-through transverse mufflers and exhaust valves that provide a pleasant driving experience at cruising speeds when closed and an aggressive, race-inspired tone when open. The system uses factory mounting points for ease of installation, while 4” dual-wall, angle-cut, polished stainless steel quad tips with laser-etched Hooker Blackheart logo offer unmatched styling.

Features

  • Fits manual 2016 Chevrolet Camaro SS V8 6.2L
  • Dyno gains of +15.88 hp and 17.7 ft.-lb. torque
  • Mandrel-bent 18-gauge polished stainless steel
  • Dual high-flow, straight-through transverse mufflers
  • 4” dual-wall, angle-cut quad tips
  • Built-in exhaust values emit different tones when open and closed
  • Eliminates restrictive factory mid-pipe
  • Quality welds for strength, longevity, and good looks
  • Uses factory mounting points for ease of installation and ground clearance
  • Backed by Hooker’s lifetime limited warranty
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

John Arnaud Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.