Tag: mustang

Flaming River (FR1515MU15): Manual Rack and Pinion for ’15-’20 Ford Mustang (S550)

John Arnaud Leave a comment
Use This Post Clip for Email

Engineered to reduce vehicle weight by 10–15 pounds, this manual rack and pinion is Flaming River’s answer to customer demand! Designed for 2015–2020 Ford Mustang (S550), the FR1515MU15 rack and pinion achieves its weight advantage by eliminating hoses, pulleys, and pumps. In addition, the billet aluminum mounting brackets can be adjusted to modify the piston angle for large tube headers and engine swaps in custom applications. Bolts into the same mounting location as the OEM Power Rack.

Note: requires Flaming River 9/16” -26 U-joint for installation (FR1709DD).

Features

  • For 2015–2020 Ford Mustang (S550)
  • 10–15 lb lighter than factory Mustang power system
  • Bolts into same mounting locations as OEM Power Rack
  • 51 1/2” overall length
  • 30” pivot point
  • 13” mounts center to center
  • 1/2” diameter mounting holes
  • 9/16” -26 spline pinion shaft
  • 12.11” inner ends (M14x1.5 male – M16x1.5 male)
  • Warranty: 1 year
Flaming River FR1515MU15 Manual Rack and Pinion for 15-20 Ford Mustang

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM: Redesigned 15” Electric Fans with Thermostat

John Arnaud Leave a comment
Use This Post Clip for Email

PROFORM has redesigned its high-performance electric fans with thermostat to be better than ever before. Boasting an improved fan shroud, two-layer circuit board, and wider-range thermostat (160°–240°F), these fans move the air needed to protect muscle cars with older engines from creeping temp gauges, reduced engine power, and declining gas mileage. Replace your horsepower-robbing, belt-driven fan with an electric upgrade from PROFORM!

These 15” diameter, eight-blade fans move 2,800 CFM and are available in your choice of straight or S-Blade design for Fox-body Mustang 5.0 (1987–1993) or universal applications. They include a heavy-duty 12-volt motor that draws only 14 amps. Includes mounting bolts and brackets.

Features

  • Mustang straight: PN 67015
  • Mustang S-Blade: PN 67028
  • Universal straight: PN 67017
  • Universal S-Blade: PN 67029
  • Promotes improved cooling over belt-driven stock fans
  • Mitigates loss of HP and gas mileage
  • Newly designed fan shroud with larger footprint
  • Upgraded circuitry increases durability and stabilizes current flow.
  • Thermostat range increased to 160°–240°F.
  • Heavy-duty, 12V motor
  • 14-amp draw
  • Includes mounting bolts and brackets
PROFORM Redesigned 15 Inch Electric Fans with Thermostat

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

LEED Brakes: Power Front Disc Brake Conversion Kit for 1970 Mustang/Cougar

John Arnaud Leave a comment
Use This Post Clip for Email

This LEED Brakes power disc brake conversion kit (PN RFC0003-3405AX) provides everything needed to mount red powder-coated, factory-style, four-piston disc brakes to your 1970 Mustang/Cougar drum brake spindles—with all the safety, reliability, and performance you desire.

LEED Brakes designed this kit to be an upgrade to its standard kit, adding the company’s MaxGrip XDS cross-drilled and slotted rotors plus braided hoses. Easily mounts to factory mounting locations using all-new, high-quality, precision-machined components. Includes step-by-step instructions and tech support.

Note: Automatic transmissions only.

Features

  • For 1970 Ford Mustang and Mercury Cougar with automatic transmission
  • Drilled rotors and red powder-coated calipers
  • Easy, bolt-on installation to factory mounting locations
  • Factory look
  • All-new components
LEED Brakes Power Disc Conversion Kit for 1970 Mustang Cougar RFC0003-3405AX

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-2594): 57 Series Performance Air Intake System for ’15-’17 Ford Mustang 3.7L

John Arnaud Leave a comment
Use This Post Clip for Email

Street-legal in all 50 states (CARB EO D-269-65), the 57-2594 performance air intake system from K&N increases the volume of airflow to the engine of your 2015–2017 Ford Mustang 3.7L (all models). Comes with a washable, reusable K&N High-Flow Air Filter™ with oiled cotton filter media that lets you go up to 100,000 miles between filter services under normal highway driving conditions, and a custom heat shield that helps protect intake air from the high temperature of your engine bay. Typical install time is less than 90 minutes.

Features

  • 57 Series air intake system for 2015–2017 Ford Mustang 3.7L (all models)
  • Guaranteed to increase horsepower and torque through high airflow and exceptional filtration
  • Will not void vehicle warranty
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Replaces factory air filter and intake tube
  • Filter requires cleaning only every 100,000 miles under normal highway driving conditions.
  • Installation time: <90 minutes with simple hand tools
  • Warranty: 10 years/Million Mile Limited Warranty™
K&N 57 Series Performance Air Intake for Ford Mustang 57-2594

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (451-356): MXP Performance Air Intake System for 2019 Ford Mustang GT 5.0L

John Arnaud Leave a comment
Use This Post Clip for Email

The 451-356 AIRAID MXP performance air intake system delivers horsepower and acceleration gains (+16.5 HP on the dyno) for the 2019 Ford Mustang GT 5.0L. The roto-molded replacement air box addresses all the shortcomings of the restrictive factory design, with a premium AIRAID air filter for outstanding air flow and filtration.

This easy-to-install system directs air through a precision computer-modeled air intake tube constructed of cross-linked, high-density polyethylene designed to maintain proper mass air flow readings and calibration. An integrated velocity stack further promotes airflow.

Together, these features create a potent increase in airflow while maintaining proper air-to-fuel ratios (no recalibration needed after installation—just bolt it on and go!). Backed by AIRAID’s No Hassle Lifetime Warranty.

Note: Not legal for sale or use in California.

Features

  • Superior horsepower and acceleration gains
  • Replaces stock intake tubing, air filter, and air box (where applicable).
  • Easy to install using commonly available tools
  • Easy-to-clean, oil-free synthetic air filter
  • Washable and reusable air filter media
  • Installation: 90 minutes with basic tools
  • Warranty: No Hassle Lifetime
AIRAID MXP Performance Air Intake System for 2019 Ford Mustang GT 5.0L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR40037): Power Rack and Pinion for ’79-’93 Fox-Body Mustang

John Arnaud Leave a comment
Use This Post Clip for Email

The FR40037 replacement power rack and pinion from Flaming River is precision robot welded for superior strength, durability, and fit. Designed specifically for the 1979–1993 Fox-body Ford Mustang, this product features the same line position as OEM as well as adjustable pinion housing for easy installation.

Proudly made in the USA—and fluid/pressure tested and certified before leaving the Flaming River facility—this power rack and pinion is popular with many top chassis builders.

Features

  • For 1979–1993 Ford Mustang (Fox body, same line position)
  • All-new components: valve, piston, seals, bearings and bushings, and pinion and rack gears
  • Robotically welded for strength and durability
  • Stainless steel braided hoses
  • Full turning radius and 6” of travel
  • 12:1 ratio/2.5 turns lock-to-lock
  • Made in the USA
  • Lifetime serviceability
Flaming River Power Rack and Pinion for 79-93 Fox Body Mustang FR40037

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

JBA (40-2647): Stainless Steel Cat-Back Exhaust System for ’18-’19 Ford Mustang 5.0

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re looking to add more power, sound, and quality to your 2018–2019 Ford Mustang 5.0, this JBA exhaust system delivers, specially tuned by the JBA experts to provide a robust exhaust tone that won’t overwhelm the interior of the vehicle. The 40-2647 kit replaces the restrictive factory exhaust system with free-flowing, mandrel-bent, stainless steel X-pipes and quality performance mufflers, finished off by polished, chrome-plated, double-wall 4” stainless steel tips that resist discoloration. Setup includes quality hardware and thorough instructions for a bolt-on installation.

Features

  • For 2018–2019 Ford Mustang 5.0
  • Increased horsepower/torque and improved throttle response
  • Powerful exhaust tone with terrific flow and durability
  • Large-diameter, stainless steel, mandrel-bent tube
  • High-flow stainless steel mufflers and polished chrome tips
  • Factory-style hangers and quality hardware (no extra parts needed)
JBA Stainless Steel Cat Back Exhaust System for 18-19 Mustang 5.0 40-2647

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Auburn Gear (5420153): “Super” Ford 8.8” Pro Series Limited Slip Differential

John Arnaud Leave a comment
Use This Post Clip for Email

The “Super” Ford 8.8” Pro Series limited slip differential from Auburn Gear is designed to fit 2015+ Mustang V8 cars (all ratios). The high-torque bias cone clutch provides maximum torque transfer, making it the ultimate limited slip differential for true performance. Compatible with IRS rear 34 tooth axle splines.

5420153 ships this month!

Features

  • For 2015+ Mustang V8 cars (all ratios).
  • Delivers maximum power and a broad torque curve for high-performance marine applications.
  • High-torque bias cone clutch for maximum torque transfer.
  • Compatible with IRS rear 34 tooth axle splines.

Auburn Gear Super Ford 8.8 Inch Pro Series Limited Slip Differential 5420153

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Silicone Lower Radiator Hose for 2015+ Ford Mustang GT

John Arnaud Leave a comment
Use This Post Clip for Email

The MMHOSE-MUS8-15L lower radiator hose kit from Mishimoto upgrades your stock 2015 Mustang with advances in both style and reliability. The kit includes a four-piece silicone lower hose, CNC connector, and worm-gear clamps to ensure an easy installation. Unlike the degradation-prone stock 2015 Mustang rubber hoses, every Mishimoto silicone hose is constructed from four layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Backed by Mishimoto’s lifetime warranty.

Available in Blue, Black, and Red.

Features

  • For 2015-and-up Ford Mustang GT.
  • Made from four layers of silicone reinforced with heat-resistant fibers.
  • Improves pressure and heat tolerance.
  • Kit includes lower radiator hose, oil-cooler lines, worm-gear clamps, and aluminum diverter pipe.
  • Colors: Black, Blue, and Red.
  • Warranty: lifetime.

Mishimoto Lower Radiator Hose Kit for 2015 and Up Ford Mustang GT MMHOSE-MUS8-15L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (CT632): CarTech’s “Mustang Special Editions”

John Arnaud Leave a comment
Use This Post Clip for Email

When Ford rolled out the Mustang in 1964, it quickly realized what it had on its hands. Soon, variations began to appear to capitalize on the car’s immense popularity. In just two short months, the first special-edition Mustang debuted at the Indianapolis 500, and the editions have just kept rolling on.

CarTech’s Mustang Special Editions: Over 500 Models Including Shelbys, Cobras, Twisters, Pace Cars, Saleens and More (CT632) covers factory offerings, regional promotions, third-party tuners, and more. With decades of research compiled and presented by authors Jonathan Klein and Jeffrey Klein, you’ll no doubt find Mustangs you didn’t even know existed, along with production numbers, key features, and photos wherever possible. This CarTech book is sure to become a go-to reference in your Mustang library or memorabilia collection.

Size: 10” x 10”
Format: Hardcover
Pages: 192
Illustrations: 457 (color), 52 (black and white)

CarTech Mustang Special Editions

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.