Tag: Parts Pro Performance Centers

Motive Gear (F888410): Performance Ring and Pinion Gear Set

David Ayers Leave a comment
Use This Post Clip for Email

Motive Gear offers the highest-quality drive train components on the market today. With a broader line of ring and pinion gears than any other aftermarket manufacturer, Motive Gear is the number-one choice for distributors worldwide. These high-performance ring and pinions are made from 8620 steel.

  • 4.10 ratio ring & pinion
  • Ford 8.8″
Motive_Gear_F888410
Motive_Gear_F888410

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Aeromotive (18689): Phantom 200 Universal In-Tank Fuel System

David Ayers Leave a comment
Use This Post Clip for Email

Considering a switch to EFI or swapping in that late-model motor? What has recently become the hottest trend in hot rodding has been plagued by fuel delivery. The question, as always, is “What do I do for a tank?” Until now, the answer has been one of three options: Weld in a sump to your tank; go with a fuel cell; or pay for a custom tank. Well, not anymore! Aeromotive’s Phantom Fuel System gives you the option to put a high-performance fuel pump inside virtually any fuel tank, including your factory tank.

The process is straightforward: Cut a hole in your tank. Measure the depth. Cut your pump hanger bracket to length and your baffle / basket foam. Insert the baffle. Install the retainer ring and gasket. Bolt down your pump and hanger. That’s it. Now you have a fuel pump inside your factory tank capable of supporting big horsepower (EFI or carbureted)—and it’s whisper quiet to boot!

Aeromotive_18689
Aeromotive_18689

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

OPTIMA (150-40008): Digital 400 Charger/Maintainer

David Ayers Leave a comment
Use This Post Clip for Email

OPTIMA’s Digital 400 12V Performance Maintainer and Battery Charger automatically maximizes battery life and performance with a built-in battery health mode. It also offers a hybrid LED battery charging gauge with LCD screen and a quick-set battery type selection for easy operation. And because it recovers discharged batteries that others cannot, this maintainer is a must have in your garage.

OPTIMA_150-40008
OPTIMA_150-40008

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M (11306): Black Cast Aluminum Differential Cover for Chrysler 9.25

David Ayers Leave a comment
Use This Post Clip for Email

B&M’s Cast Aluminum Differential Cover was designed to strengthen the rear end by preventing case distortion, ring gear, and cap bearing deflection. Constructed of A356.0-T6 aluminum, this rugged unit dissipates heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. To increase durability and aesthetics without compromising heat dissipation, the cover has been coated with a US-military-grade (MIL-A-8625) black anodized finish. Additional features include an engraved B&M logo, added fluid capacity for better cooling, magnetic drain plug for catching ferrous metal particles, complete hardware, installation instructions, and a 1-year warranty.

B&M_11306
B&M_11306

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (817741): American Thunder Cat-Back System

David Ayers Leave a comment
Use This Post Clip for Email

With its classic sound, Flowmaster’s 817741 American Thunder Cat-Back System for the 2015 Dodge Charger SE/SXT and 2015 Chrysler 300S with 3.6L V6 engine features mufflers tuned to deliver more power, torque, throttle response, and mileage. Best of all, these exhaust systems take sedate vehicles and deliver the great performance tone that muscle car fans love. American Thunder is the most authentic Flowmaster muffler sound available.

Flowmaster_817741
Flowmaster_817741

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD (2900): Atomic EFI Master Kit

David Ayers Leave a comment
Use This Post Clip for Email

The MSD 2900 is the complete kit for anyone planning to convert from a carburetor to Atomic EFI. You get the throttle body, power module (with wideband O2 sensor), handheld controller, and the standard fuel kit for up to 525 hp naturally aspirated (at the crank). The Atomic TBI is compatible with boost/nitrous!

  • Blow through or draw through
  • 2 BAR MAP, up to 14 psi
  • Timing control (retard per pound of boost)*
  • Alternate air fuel setting under boost
  • Includes a nitrous retard (will retard timing when nitrous is active)

*The Atomic must be controlling ignition timing in order for boost/nitrous timing retards to work.

MSD_2900
MSD_2900

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NOS (05101NOS): “SUPER POWERSHOT” Holley 4-Bbl

David Ayers Leave a comment
Use This Post Clip for Email

Super Powershot™ systems utilize a thin (1/2”) injector plate that is installed between the carburetor and the intake manifold. Within the plate are special NOS®-designed spray bars that inject both nitrous oxide and fuel precisely into the manifold—creating a smooth rush of power on demand. With your finger off the button, the engine is its normal, docile self and fuel economy is not affected. Each Super Powershot™ system comes standard with a 10-lb.-capacity nitrous bottle, aircraft-quality stainless-steel braided hose, injector plate, solenoids, and all other necessary electrical and mounting hardware for a complete installation. Super Powershot™ systems are designed with the ability to change jet sizes, allowing for less or more of the nitrous/fuel mix to be injected for variable power output.

  • Allows jet changing for different power levels
  • Smooth extra power rush
  • Fuel economy unaffected
  • Provides safe power
  • 3 power levels: 100, 125 & 150
  • Jets included
NOS_05101NOS
NOS_05101NOS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (69-3536TTK): Typhoon Intake for 2015 Ford Mustang 3.7L

David Ayers Leave a comment
Use This Post Clip for Email

A K&N performance air intake system is designed to free up horsepower being lost to restrictive factory air inlet components. By replacing the stock enclosed air box, accordion hosing, and sound baffling, a K&N performance air intake system can reduce restriction, straighten airflow, and increase both horsepower and torque. K&N’s 2015 Ford Mustang Fastback V6 and 2015 Ford Mustang Convertible V6 air intake systems (69-3536TTK) replace these restrictive factory parts with a mandrel-bent aluminum air intake tube, finished in a flat black powdercoat and coupled to a high-flow washable and reusable K&N air filter. Additionally, it incorporates an application-specific, powder-coated heat shield, which helps block hot air from entering the intake system.

KN_69-3536TTK
KN_69-3536TTK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

HOOKER (70503303-RHKR): Blackheart Cat-Back for 2015 Mustang GT 5.0L

David Ayers Leave a comment
Use This Post Clip for Email

At the heart of any performance vehicle is the exhaust system. Hooker, with its classic heart logo, has been at the core of the exhaust industry for decades, and it continues to push the boundaries of performance with its new Blackheart exhaust systems for popular late-model vehicles. The Blackheart platform is designed to be a full exhaust program: from the cylinder head flange to the tailpipe. Blackheart provides maximum exhaust velocity, ground clearance, style, performance, and quality!  When it’s time to tear the heart out of the competition, choose Blackheart!

Hooker_70503303-RHKR
Hooker_70503303-RHKR

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (67603): Universal LS Valve Spring Compressor Tool

David Ayers Leave a comment
Use This Post Clip for Email

Cut your valve spring removal and replacement time! This LS valve spring compressor is compact, can be activated with standard hand tools, and takes up almost no space in your toolbox. It will make the job easier and quicker, for less than more expensive compression tools.

Proform_67603
Proform_67603

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.