Tag: ss

Mishimoto (MMBCC-CSS-10P): PCV-Side Baffled Oil Catch Can for ’10-’15 Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

The LS3 and L99 engines fitted to the 5th Gen Camaro SS generate more than 400+ HP from their eight cylinders. But they produce something a little less desirable, too: blow-by. Oil, fuel, and other by-products of combustion squeeze their way past piston rings with each stroke. Left unchecked, this material can rob your Camaro of power and efficiency.

The air diverters and internal baffles in Mishimoto’s direct-fit catch can kits help slow incoming air, condensing oil, and fuel vapors, while a 50-micron bronze filter prevents further blow-by from escaping into your intake. The MMBCC-CSS-10P mounts via a custom-fit bracket without any drilling or cutting required. Direct-fit lines, complete with quick-disconnect fittings, mate our can to your factory Chevy PCV system for an easy and seamless install.

These Mishimoto catch cans are different from most air-oil separator (AOS) systems in that they are not heated, meaning all of the blow-by can condense in the can—including low-octane oil vapors and contaminated fuel vapors. Second, many AOS systems also drain the blow-by into the oil pan, while Mishimoto’s trap the blow-by and keep it out of the engine permanently.

Features

  • Direct fit for 2010–2015 Chevrolet Camaro SS with LS3 or L99 engine.
  • Defends intake system and essential components from oil blow-by.
  • Fully serviceable billet 6061 aluminum sealed can.
  • Internal air diverter increases air turbulence to improve oil separation.
  • Single can mounts in line with the PCV system.
  • Separates oil from air using a 50-micron bronze filter.
  • Installs in less 30 minutes.
  • Brackets mount the can in a serviceable location away from most intake and supercharger kits.
  • Works with stock air/oil separator to deliver maximum protection for your engine.
  • 2 oz. capacity for longer servicing intervals.
  • Silicone hoses include pre-attached, stock-style quick-disconnect fittings.
  • Helps maintain proper octane levels to reduce potential detonation.
  • Hoses available in Black, Blue, or Red.
  • Backed by the Mishimoto lifetime warranty.

Mishimoto Oil Catch Can for Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: E-Force Supercharger System for 2016 Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

The new E-Force Supercharger from Edelbrock is a Stage 1 Street system that provides more horsepower and torque for your 2016 Chevy Camaro SS (auto: #1558, manual: #1559). How much more? The 1559 puts stock power up to 580 hp and 548 ft.-lb. of torque at the real wheels. That’s an extra 140 horsepower and 124 foot-pounds of torque!

These E-Force Superchargers are designed to work with all OEM emissions equipment, which will make them 50-state emissions legal (EO number pending). Combined with great looks (black powder-coated supercharger assembly and bright-red coil covers) and an incredible 3-year/36,000-mile warranty, that makes these systems a great choice for your daily driver.

Enthusiasts will appreciate the Eaton 2300 TVS rotor assembly, air-to-water twin intercooler system, and dual pass heat exchanger. Edelbrock has fine-tuned the performance via a unique runner design and an integrated bypass value, which help reduce parasitic loss under light throttle—thus improving potential fuel efficiency. And it all goes under the hood without any modification!

  • Stage 1 Street systems for manual (1559) and automatic (1558) ’16 SS Camaros.
  • Designed to work with OEM emissions equipment (EO number pending).
  • Black powder-coated supercharger assembly.
  • Bright red coil covers.
  • Eaton 2300 TVS rotor assembly.
  • No under-hood modification.
  • 3-year/36,000-mile warranty.
Edelbrock: E-Force Supercharger System for 2016 Camaro SS
Edelbrock: E-Force Supercharger System for 2016 Camaro SS

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.