Tag: valve cover

Racing Power Company: Billet Aluminum and PCV Push-In Breathers with CID Logo for SBC

John Arnaud Leave a comment
Use This Post Clip for Email

Show off your SBC engine’s cubic inch displacement with a new push-in valve cover breather or PCV breather from Racing Power Company. These billet aluminum breathers have the CID laser-etched right on them, finishing off the durable powdercoat with a little tasteful boasting. Custom laser etching is also available (check with RPC)! Made to fit 1 1/4” valve cover holes using 1” ID grommets.

Currently available for four popular displacements (more designs coming soon!):

  • 327 breather: R8207
  • 327 PCV: R8341
  • 350 breather: R8208
  • 350 PCV: R8342
  • 383 breather: R8209
  • 382 PCV: R8343
  • 400 breather: R8211
  • 400 PCV: R8345
Racing Power Company Billet Aluminum and PVC Push-In Breathers with CID logo for SBC

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Top Street Performance: Finned Cast Aluminum Valve Covers with Coil Mounts and Covers for GM LS

John Arnaud Leave a comment
Use This Post Clip for Email

Finned cast aluminum valve covers from Top Street Performance solve the problem of ugly ignition coils sitting on top of your newly dressed-up GM LS engine. These two-piece covers eliminate the need to relocate without sacrificing style. Each base has a tall internal height to allow for added valvetrain clearance, as well as provisions for mounting two of the most popular LS coil packs—no brackets required. Other features include a baffled, stock-style ventilation setup; cutouts for routing the wiring harness and spark plug wires; and a classic finned top.

Available in three finishes:

  • Black (JM8082-2BK)
  • Polished (JM8082-2P)
  • Satin (JM8082-2)

Features

  • Valve cover base mounts to LS1/2/3/6/7 engines
  • Provisions for Delco 510C and D580 ignition coils
  • 4.25” tall
  • Cast aluminum construction
  • Includes two covers
Top Street Performance Finned Cast Aluminum Valve Covers with Coil Mounts and Covers for GM LS JM8082-2P

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM: Mopar Valve Covers and Wing Nuts for LA, B, and R/B Engines

John Arnaud Leave a comment
Use This Post Clip for Email

Looking for more Mopar parts? Then 2020 is your year. PROFORM has just released new officially licensed valve cover and wing nut options painted with the signature blue Mopar emblem—the distinct look that started with timing chain covers and breather caps. These products not only upgrade the look of your engine but also provide a precise fit and positive seal to prevent leaks. Manufactured from premium steel in lustrous chrome and black crinkle with the Mopar emblem in vibrant-blue, hand-inlaid paint.

PROFORM is working to expand the available options to include alternators, air cleaners, roller rockers, and the company’s unique floating M air cleaner center nuts, so stay tuned for more!

Features

  • Black crinkle or chrome finish with blue-painted Mopar emblem
  • For LA, B, and R/B Chrysler engines
  • Quality stamped steel in a tall style
  • OEM-style oil-restricting baffles
  • Officially licensed Mopar product
  • Sold in pairs
PROFORM Mopar Valve Covers and Wing Nuts

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (69520): Ignition Coil Brackets for GM LS1/S6 V8 Engines

John Arnaud Leave a comment
Use This Post Clip for Email

PROFORM has the solution for what to do with those pesky coils in confined spaces. The company’s 69520 ignition coil brackets lift your coils off your valve cover so you can see the Chevrolet emblem. How do they work? A unique rail-mounting system attaches to the threaded holes on the valve cover, and the individual coils attach to the rail to allow for mounting in multiple positions. All necessary hardware is included. Also available for LS3/S7 applications (PN 69521).

Note: PROFORM coil brackets are not compatible with AC Delco coils D585 and D581 or stock spark plug wires (which are not long enough); if making your own wires, a 13–15” length is required.

Features

  • For LS1 and LS6 coils.
  • Compatible with PROFORM LS slant-edge valve covers.
  • Includes brackets and hardware.
  • Sold in pairs.
PROFORM 69520 Ignition Coil Brackets

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM: Chevy Orange Stock-Height Valve Covers for Small-Block Chevy Gen II

John Arnaud Leave a comment
Use This Post Clip for Email

Now available in popular Chevy Orange to complete your desired look, these stock-height valve covers from PROFORM have a factory design and shape, with hand-painted black fins and Bowtie. The covers received a SEMA Global Media Award for being one of the best new products in the show, and it’s easy to see why: PROFORM manufactures them to GM specifications (including using GM-designed baffles), but uses stamped steel that is 20% thicker than typical aftermarket covers. This officially licensed product is sold in pairs.

Features

  • Fits 305-350 SBC engines 1987 to pre-LS.
  • Chevy Orange finish with black ribs and Bowtie.
  • Made from quality steel.
  • Short, center-bolt style with baffles.
  • Officially licensed Chevrolet Performance Product.
  • Sold as one pair.
PROFORM Chevy Orange Value Covers for SBC Gen II

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Trans-Dapt Performance: LS Valve Cover Adapter Kits

John Arnaud Leave a comment
Use This Post Clip for Email

With the popularity of the GM LS engine swap clearly here to stay—even finding their way into Ford street rod and hot-rod builds—Trans-Dapt Performance is committed to continue bringing products to market that meet enthusiast needs. In that vein are new LS valve cover adapter kits, which give your reliable yet perhaps ordinary-looking LS engine some serious muscle car attitude.

Trans-Dapt LS valve cover adapters are made in the USA from laser-cut steel and are compatible with steel (chrome or powdercoated), cast, or fabricated aluminum valve covers. Each kit comes with all necessary gaskets and mounting hardware required to make the change.

Features

  • Laser-cut steel construction.
  • Inject muscle-car attitude to your LS engine-swap project.
  • Compatible with steel (chrome or powdercoated), cast, or fabricated aluminum valve covers.
  • Includes all necessary gaskets and mounting hardware.
  • Made in the USA.

Trans-Dapt Performance LS Valve Cover Adapter Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley: Vintage Series Small-Block Chevy Valve Covers – Factory Orange

John Arnaud Leave a comment
Use This Post Clip for Email

Holley’s Vintage series finned valve covers for SBC engines have a new color: Factory Orange joins Standard Natural Cast, Satin Black Machined, and Polished.

These die-cast aluminum Holley covers fit all 1958–1986 small-block Chevy engines with perimeter bolt patterns and are available with (241-239) or without (241-272) emissions provisions.

Features

  • For 1958–1986 SBC engines with perimeter bolt patterns.
  • Die-cast aluminum construction provides high detail and reduced warping/oil leaks.
  • 5” tall for good internal clearance.
  • Available with or without emissions provisions.
  • New Factory Orange finish.

Holley Orange Valve Covers for Small Block Chevy 241-239

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (141-256): LSX Emblem Valve Covers for Chevrolet – Black Crinkle

John Arnaud Leave a comment
Use This Post Clip for Email

PROFORM’s 141-256 valve cover with LSX emblem will give your generic-looking stock LS engine a totally personalized look. Taller than stock valve covers, and thus able to accommodate a variety of large valve-train applications, these covers are available with both raised and recessed emblems. Includes unique mounting studs, oil-restricting baffles, and threaded mounting holes for the optional (and included) integrated ignition coil bracket.

Features

  • Patented design.
  • Raised and milled aluminum LSX logo.
  • Intricate oil baffle prevents oil from escaping.
  • Passenger-side cover has an oil-filler hole.
  • Attractive painted finish.
  • Generous internal clearance for large valve trains.
  • Sold in pairs.

PROFORM LSX Emblem Valve Covers for Chevrolet Black Crinkle

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mr. Gasket: Valve Covers for AMC/Jeep

John Arnaud Leave a comment
Use This Post Clip for Email

Available in Chrome or EDP Black, these reasonably priced Mr. Gasket valve covers for AMC/Jeep V8 (and inline V6) engines are perfect for an upgrade in appearance or as a replacement of stock components. Their quality stamped-steel construction is tough enough to handle any application.

But before we get into the features, a word about EDP. EDP—or electrophoretic deposition— is a finishing process by which metal parts are electrically charged and then dipped in an opposite-charged paint solution. This sequence attracts the paint to the metal to achieve total part coverage with excellent corrosion resistance while also creating a smooth and nonporous layer of paint. EDP coats look great as they are, but you can also further paint or powder coat them as you desire.

Choose from two sets of part numbers:

9830BMRG (EDP Black) and 9830CMRG (Chrome)

  • For 1968–1979 AMC/Jeep V8.
  • Perimeter-style top bolt pattern.
  • Smooth top design.
  • Sold in pairs.

9831BMRG (EDP Black) and 9831CMRG (Chrome)

  • For 1964–1988 AMC/Jeep inline V6.
  • Perimeter-style top bolt pattern.
  • Smooth top design.

Mr. Gasket Valve Covers for AMC Jeep

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Quick Fuel Technology: Fabricated Aluminum Valve Covers

John Arnaud Leave a comment
Use This Post Clip for Email

Available for popular Small Block or Big Block Chevy, Ford, and Mopar engines, the new race-inspired fabricated aluminum valve covers from Quick Fuel Technology are available with or without 1.25” breather openings for use with vacuum pumps or dry sump engines. These lightweight, durable valve covers are made from TIG-welded 6061 T5 sheet aluminum, with a 1/4” mounting flange, laser-etched QFT logo, and heights that clear most popular rocker arm applications. Mounting hardware included; sold in pairs.

Two finishes available: Silver Anodized or Black Coated.

Features

  • Available for popular Small Block or Big Block Chevy, Ford, and Mopar
  • 100% TIG-welded 6061 T5 aluminum.
  • 1/4” one-piece billet aluminum mounting flange.
  • Available with or without 1.25” breather openings.
  • Clear many rocker arm combinations.
  • Race-inspired, laser-etched QFT
  • Includes mounting hardware for both valve covers.
  • Sold as a pair.

Quick Fuel Technology Fabricated Aluminum Valve Covers

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.