Month: April 2020

Taylor® (83051) ThunderVolt® 8.2mm Spiro-Wound Universal Ignition Wire Set

David Ayers Leave a comment
Use This Post Clip for Email

Taylor’s ThunderVolt® 8.2mm Ignition Wire Set outperforms the competition in looks and performance, both at an affordable price.

This ignition wire set is a must-have if you are using an ignition system with multiple spark discharge. The ignition wire features an exclusive, two-layer, 100% Zimplex silicone outer jacket that provides heat-resistant protection up to 600°F. This kit also includes 100% silicone spark plug boots and vibration-proof, double-spring locking terminals.

The ThunderVolt® 8.2mm Ignition Wire Set universally fits all 8-cylinder engines and is RFI/EMI compatible for all ignition systems. This set features only 40 ohms of resistance per foot and offers superior spark energy. It will also create a smoother idle for improved fuel economy, while increasing the horsepower and torque gains.

  • Universally fits all 8-cylinder engines
  • RFI/EMI compatible for all ignition systems
  • Resistance is only 40 ohms per ft
  • Ferrite, spiro-wound, coated core
  • 90° boot angle
  • 100% silicone, two-layer jacket
  • Heat protection up to 600°F
  • Superior spark energy
  • Horsepower increases (torque gains)
  • Smoother idle & improved fuel economy

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (71-1542) 2020 Dodge Challenger 5.7L V8 Gas Except Shaker Hood

David Ayers Leave a comment
Use This Post Clip for Email

The Blackhawk Induction™ air intake system from K&N for the 2020 Dodge Challenger 5.7L V8 features an oil-free synthetic filter media providing increased airflow and engine protection. This system has a black powder-coated aluminum intake tube and all black components for a seamless look.

The DRYFLOW® synthetic filter featured in this air intake system also has a steel heat shield helping to protect intake air from the high temperatures of your engine bay.

  • Powder-coated aluminum intake tube paired with DRYFLOW® synthetic air filter
  • Provides high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles (under normal highway driving conditions)
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flaming River (FR60004) Programmable RFID Keyless Ignition System Dash Mount

David Ayers Leave a comment
Use This Post Clip for Email

Flaming River has a new addition to its Keyless Ignition Systems that’s hands free and more convenient. The Programmable Ignition System Dash Mount uses RFID proximity technology to automatically authorize your vehicle to start.

This new system is fully programmable, allowing you to use your keyless entry or trunk release system, door poppers as well as other popular remotely-controlled accessories. The system can stand alone or be integrated into any of Flaming River’s tilt columns in a paintable, black powdercoated, or polished finish.

This new system has several security features to give you convenience and peace of mind. It has an emergency bypass mode allowing for the vehicle to be started using a unique pin number, and it has a security lockout feature preventing the system from being activated when the key fob is inside of the proximity range.

  • Programmable, keyless ignition system
  • RFID proximity technology to automatically authorize vehicle start
  • System can stand alone or be integrated into any of Flaming River’s tilt columns
  • Paintable, black powder-coated, or polished finish.
  • Additional security features

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter (17121) A-Pillar Triple 2-1/16″ for Silverado/Sierra 14+

David Ayers Leave a comment
Use This Post Clip for Email

Durable, high-quality and customizable, the A-Pillar Triple gauge pod from AutoMeter is a great solution to your mounting needs in your Chevy Silverado or GMC Sierra 2014 and newer.

The A-Pillar Triple can be painted to match any interior, and it looks great with AutoMeter 2-1/16″ gauges. Installation is straightforward with no drilling or modification required.

  • Positions key performance data within driver’s field of vision
  • Professional fit and finish
  • No modification of factory trim piece required
  • Black textured finish which can be painted to match your interior
  • High quality, composite construction is incredibly durable
  • Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Belltech Leveling Kits / 2019-2020 Jeep Gladiator

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking to add a lift to your Jeep Gladiator without breaking the bank, Belltech has launched two new economical kits. The Coil Spring Spacer Kit is great if you’re looking to simply level and the Front Coil Spring Spacer Kit is s 2.5″ lift, perfect if you’re wanting to add bigger, more aggressive tires.

Coil Spring Spacer Kit #34861 (front and rear lift)

  • Helps achieve a full 2.5″ lift
  • Perfect for bigger tires from 35″ up to 37″
  • Creates a leveled look while maintaining the same rake from front to back

Front Coil Spring Spacer Kit #34862 (front lift only)

  • Helps achieve an even, leveled appearance
  • Removes unwanted factory rake
  • Simple bolt-in design
  • Easy installation

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Top Street Performance: Finned Cast Aluminum Valve Covers with Coil Mounts and Covers for GM LS

David Ayers Leave a comment
Use This Post Clip for Email

Finned cast aluminum valve covers from Top Street Performance solve the problem of ugly ignition coils sitting on top of your newly dressed-up GM LS engine. These two-piece covers eliminate the need to relocate without sacrificing style. Each base has a tall internal height to allow for added valvetrain clearance, as well as provisions for mounting two of the most popular LS coil packs—no brackets required. Other features include a baffled, stock-style ventilation setup; cutouts for routing the wiring harness and spark plug wires; and a classic finned top.

Available in three finishes:

  • Black (JM8082-2BK)
  • Polished (JM8082-2P)
  • Satin (JM8082-2)

Features

  • Valve cover base mounts to LS1/2/3/6/7 engines
  • Provisions for Delco 510C and D580 ignition coils
  • 4.25” tall
  • Cast aluminum construction
  • Includes two covers
Top Street Performance Finned Cast Aluminum Valve Covers with Coil Mounts and Covers for GM LS JM8082-2P

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter (880789): Mopar Classic 3.75” Tachometer

David Ayers Leave a comment
Use This Post Clip for Email

The king of gauges is back with another outstanding addition to its lineup of legendary tachs. The 3.75” Mopar Classic tachometer (PN 880789) from AutoMeter reads up to 8,000 RPM, with traditional incandescent lighting to illuminate the dial’s perimeter. The 880789 tach, which is compatible with 12- and 16-volt systems, sports a race-proven air-core electric design and ultra-responsive needle for quick and accurate readings. The kit includes a bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed installation instructions. This is the no-compromise choice for no-compromise builds.

Features

  • Traditional incandescent lighting illuminates the perimeter of the dial.
  • 12 and 16 volt compatible
  • Includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
  • Race-proven air-core electric technology for quick and accurate readings
  • Responsive needle can go from zero to full scale in 333 ms.
  • Compatible with most 4-, 6-, and 8-cylinder engines
AutoMeter Mopar Classic Tachometer 880789

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

FiTech (37001): Retro LS EFI 650 HP Fuel Injection System

David Ayers Leave a comment
Use This Post Clip for Email

The Retro LS EFI 650 HP fuel injection system from FiTech is a complete throttle body kit that delivers old-school carburetor looks alongside EFI technology and reliability. In addition to its classic gold finish and FiTech’s innovative annular-discharge design, the 37001 system gets you on the road faster and more easily than any other system on the market today: it comes with the needed wiring harness and sensors, a tight-fit regulator, and hand-held tuner—no computer experience required. And last but not least, this is a virtually maintenance-free system, keeping your vehicle reliable and ready to drive—no more vapor lock and fuel varnish issues.

Features

  • Transmission control for 4L60, 4L65, and 4L80 GM transmissions
  • Fits V8 engines (250–650 HP)
  • Includes connections for Ford and GM TH350, 700R4, and other transmission linkages
  • Classic gold finish for that carburetor look, with the drivability of EFI
  • Innovative annular-discharge design
  • Flow-matched 80 lb injectors and knock sensor control
  • Bosch wide band controlled and custom cam friendly
  • Fully self-tuning ECU (no laptop required)
  • Plug-and-play harnesses with minimal connections
FiTech Retro LS 650 HP EFI System 37001

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (010669): Vapor Lock™ Fuel Line Sleeve

David Ayers Leave a comment
Use This Post Clip for Email

The Vapor Lock™ fuel line sleeve from Design Engineering, Inc. prevents fuel and other fluids from boiling due to extreme heat and causing a vapor lock situation—along with the rough idling and difficult starting that accompany it. Made from glass fiber and polyester laminated to an aluminum outer layer, Vapor Lock™ fuel line sleeves (PN 010669) work by greatly reducing heat in the line to keep fuel cooler (340 degrees of direct heat resistance). Plus, thanks to its split design and adhesive flap, this DEI product installs easily without having to disconnect the fuel line.

Features

  • Use on fuel lines to prevent vapor lock
  • Or use on any cable, hose, or line for added heat protection
  • 5/8” (16 mm) interior diameter x 36”; easily cuts to size
  • Split design with adhesive flap
Design Engineering Inc Vapor Block Fuel Line Sleeve 010669

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.