Author: John Arnaud

MSD Performance Atomic Transmission Control Module 2760

MSD Performance (2760): Atomic Standalone Transmission Control Module

John Arnaud Leave a comment
Use This Post Clip for Email

The Atomic EFI series from MSD Performance is designed to be easy to install and set up, and the 2760 transmission control module from the same family follows in those footsteps. This standalone controller takes the mystery out of programming your GM or Ford four-speed automatic transmission, allowing you to modify shift points, torque converter clutch behavior, shift firmness, and more via the supplied handheld monitor—no more computers or confusing software.

You can leave the monitor in place to keep tabs on your transmission performance or disconnect when finished adjusting. View data such as engine or vehicle speed, throttle position, transmission fluid temperature, shifter position, commanded gear, and many others.

Features

  • Adjust shift points and torque converter clutch behavior.
  • Select different levels of shift firmness.
  • Choose auto-shift mode or manual-shift mode.
  • Included Dyno Mode delivers repeatable chassis dyno results.

MSD Performance Atomic Transmission Control Module 2760

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Email Center: Send Email like a Pro

John Arnaud Leave a comment
Use This Post Clip for Email

Email Center™ is a new service designed to make email marketing easier than ever before, with user-friendly, time-saving features that let aftermarket retailers and installers communicate quickly and effectively with all of your customers. If you thought email is too hard or takes too much time, think again!

Effective email marketing starts with a good list, and Email Center™ simplifies the creation and maintenance of contacts. For example, you can create subgroups for targeted messages and determine the effectiveness of your efforts with analytics tools.

Email Center™ also gives you prepared templates, drag-and-drop editing (no technical knowledge required), automated sending, the ability to accept payments through email, one-on-one support, and more!

Parts Pro™ Platinum subscribers can send unlimited emails per month to up to 500 unique recipients at no additional cost; for non-subscribers, cost varies based on the number of email addresses in their overall lists. For pricing information or to learn more, contact us at (800) 251-4252 or sales@theaamgroup.com today!

Features and Benefits

  • Unlimited sent emails
  • Drag-and-drop editing
  • Prepared templates
  • Automated functions
  • Transaction-based emails
  • Targeted emails by group
  • Easy list management
  • Tracking and testing tools
  • Knowledgeable customer support
  • Quick login through the Insight™ account system

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: Hypertech Max Energy 2.0 Power Programmer

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the Max Energy 2.0 Power Programmer from Hypertech on a 2014 Chevy Camaro V6.

Parts used in this video:

Max Energy 2.0 Power Programmer (2000)

Max Energy 2.0 Power Programmer, California Emission Legal (2100)

Want to check out more about Hypertech?
https://partspro.com/manufacturer/hypertech

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66988): Double-End AN Wrench Set

John Arnaud Leave a comment
Use This Post Clip for Email

The new four-piece, double-end AN wrench set from PROFORM is a terrific way to add versatility to your toolbox. Each wrench boasts 30- and 60-degree heads to grip hose ends from a wider array of positions and into some of the tightest spaces thanks to its streamlined handle edges. These wrenches offer a firm grip, CNC-machined fitting numbers, and a brilliant color-coded finish (blue -6AN, gold -8AN, red -10 AN, and black -12AN). Store and transport easily via included nylon carry case.

Features

  • Quality billet aluminum protects AN fittings.
  • 30- and 60-degree heads on every wrench.
  • Superior grip and comfort.
  • AN number micro-CNCd into every handle.
  • Sturdy nylon zippered case included.

PROFORM Double-End AN Wrench Set 66988

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter: 3-1/8” Pedestal Mounting Cups

John Arnaud Leave a comment
Use This Post Clip for Email

The new 3-1/8” mounting cups from AutoMeter answer the challenge of finding the perfect place to mount your AutoMeter tach or speedo (22 models currently available). This product can be mounted inside or outside of the cabin, on top of or under the dash. A great choice for AutoMeter’s “Street Rod” series gauges (e.g., Arctic White, Designer Black, Old Tyme White/Black, Antique Beige, etc.)

Available in Chrome (2153) or Black (2154); includes mounting strap, black base, hardware, and instructions.

Features

  • Universal mounting for AutoMeter 3-1/8” tachometers or electric speedometers.
  • Can be mounted inside or out, on or under the dash.
  • Includes mounting hardware and installation instructions.
  • Available in Chrome or Black.

AutoMeter Pedestal Mounting Cups

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NOCO: Lithium Jump Starters Bring Dead Batteries to Life in Seconds

John Arnaud Leave a comment
Use This Post Clip for Email

The Genius Boost line of ultra-portable, lightweight, and compact lithium jump starters from The NOCO Company is engineered to significantly outperform traditional lead-acid technology. Genius Boost can safely jump start a dead battery in seconds—up to 20 times on a single charge. All four models are mistake-proof, featuring spark-proof technology and reverse polarity protection, making them safe for anyone to use. Able to hold their charge for up to one year and doubling as USB battery packs for recharging personal devices on the go, these products also feature a built-in, high-output LED flashlight. NOCO Genius Boost jump starters are intended for 12-volt lead-acid batteries in cars, boats, trucks, motorcycles, and more. They are safe to use on engines of any size.

Choose From:

  • GB20 400A Genius Boost Sport: For gas motorcycles, ATVs, lawn mowers, and cars with precision clamps for hard-to-reach batteries. Recommended for engines up to 4.0L gas.
  • GB40 1,000A Genius Boost Plus: For gas and diesel cars, trucks, boats, and more. Recommended for engines up to 6.0L gas and 3.0L diesel.
  • GB70 2,000A Genius Boost HD: For gas and diesel high-displacement cars, trucks, boats, and more. Equipped with a 12V in-and-out port for powering 12V devices such as tire pumps, inverters, and more. Recommended for engines up to 8.0L gas and 6.0L diesel.
  • GB150 4,000A Genius Boost Pro: For gas and diesel high-displacement cars, trucks, boats, and more. Equipped with a built-in voltmeter and 12V in-and-out port for powering 12V devices. Recommended for 10L+ gas and diesel engines up.

Genius Boost Lithium Jump Starters

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hushmat: More Than 300,000 Custom Year/Make/Model Kits Available

John Arnaud Leave a comment
Use This Post Clip for Email

Hushmat Custom Kit

As of 2018, Hushmat has exceeded 300,000 custom sound-deadening and thermal-insulating vehicle kits. These year/make/model–specific bundles make it easy to order and install exactly what you need, providing preformed and presized solutions designed to insulate against heat and noise. These complete kits include application-specific templates to facilitate installation.

Originator of Hushmat and Hushmat Ultra, Hushmat produces the only aftermarket sound-deadening and thermal-insulating material made in America.

Features

  • Custom kits available for more than 300,000 specific applications.
  • Thermal and sound insulation for cars and trucks.
  • Applies to the sheet metal, plastic, or fiberglass surrounding your vehicle’s interior.
  • Reduces engine, exhaust, and radiant heat.
  • Reduces road, engine, and exhaust noise.

Hushmat Installed

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: Header Flanges for Small-Block Chevy 265-400

John Arnaud Leave a comment
Use This Post Clip for Email

Hedman Hedders header flanges meet the same rigid quality-assurance standards as the flanges used to produce Hedman’s ready-to-bolt-on headers, ensuring that the fruits of your hard work will last for years to come. Their mild steel construction is easy to work with, and they come with 1-5/8” starter stubs (29210) or without (29200).

Features

  • Precision laser-cut flanges.
  • Mild steel construction.
  • Sold in pairs.
  • Available with or without welding stubs.

Hedman Hedders Flanges

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD Performance (6415): 6EFI Universal Ignition Control

John Arnaud Leave a comment
Use This Post Clip for Email

Made to complement your MSD Performance Atomic EFI (or other aftermarket electronic fuel injection), the 6EFI ignition control is a universal product designed to work in harmony with EFI systems (on 4-, 6-, or 8-cylinder engines) and comes with detailed wiring instructions to make installation a breeze.

The 6415 6EFI produces numerous benefits, including increased throttle response, smoother idle, quicker starts, and full ignition power throughout the entire RPM range. It also offers capacity discharge technology, which fires a series of multiple sparks that last for 20 degrees of crankshaft rotation when the engine is running at lower RPM. Finally, MSD gave this product an adjustable rev limiter (via rotary dials in 100 RPM increments) to protect your engine in the event of a missed shift or driveline failure.

Features

  • Specially designed for EFI systems.
  • Compact housing.
  • Detailed instructions included.
  • Capacitive discharge technology.
  • Integrated rev limiter.
  • Works with 12V distributed electrical systems.
  • Easily connects to magnetic pickup, electronic, and even points distributors.

MSD Performance 6EFI Universal Ignition Control

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66978): Eight-Piece Aluminum AN Wrench Set

John Arnaud Leave a comment
Use This Post Clip for Email

Color-coded, lightweight, and affordable AN hex wrench set from PROFORM is ideal for tightening valuable aluminum fittings without marring damage. Kit includes eight wrenches.

Features

  • 8-piece, color-coded set.
  • Includes sizes -3AN through -20AN.
  • Quality aluminum construction.

 

PROFORM Eight-Piece Aluminum AN Wrench Set

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.