Category: Industry

K&N: Get a Free Mini Decorative Replica Helmet or $25 Card with Air Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good December 1–31. Click image for printable form and complete details!

 

K&N Free Mini Helmet or $25 Card on Air Intakes

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N: Get a Free Hat or $25 Card with Air Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good December 1–31. Click image for printable form and complete details!

 

K&N Free Hat or $25 Card on Air Intakes

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

MSD Performance: Direct Ignition System (DIS) Kits

David Ayers Leave a comment
Use This Post Clip for Email

Available for big block Chevy, small block Ford, and Cleveland Fords, the new Direct Ignition System (DIS) kits from MSD Performance make it easy to upgrade from a conventional distributor-type ignition to modern and efficient coil-per-plug technology. MSD DIS kits eliminate distributor-cap and rotor wear, reduce spark-energy losses from long wires, and optimize tuning parameters.

Users can program these kits through a mini-USB port to provide individual cylinder timing, while fully programmable 2D and 3D timing maps offer complete timing control; MSD’s easy-to-use proprietary software makes real-time configuration and tune-ups simple.

Finally, the smartly labeled wiring harness takes the guesswork out of conversion for a hassle-free installation.

Features

  • Easily convert to a coil-per-plug ignition system.
  • Preprogrammed timing maps.
  • Fully programmable 2D and 3D timing maps provide complete timing control.
  • Individual Cylinder Timing (ICT) allows precise tuning.
  • Built-in 2.5 bar Manifold Absolute Pressure (MAP) sensor for boosted applications.
  • Optional temperature sensor input to control timing based on temperature.
  • On-board data acquisition.
  • Fully potted electronics and sealed connectors for maximum durability.
  • Easily programmable through a mini-USB communication port.
  • Programmable Max Rev and Launch RPM limiters provide engine protection.
  • Consistent holeshots thanks to a Programmable Launch Timing Retard.
  • Single Timing Step Retard ideal for pulling timing for nitrous applications.

MSD Performance Direct Ignition System Kits

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock (2519): Marine Performer Intake Manifolds for Chevy 4.3L V6 Vortec

David Ayers Leave a comment
Use This Post Clip for Email

Ready to ship and designed for 1996-to-present Chevy 4.3L V6 Vortec engines (with 8 vertical hold-down bolts), the 2519 marine performer intake manifold gives you legendary Edelbrock performance out on the water. The brass-lined front water crossover and two brass flange inserts cover the rear water openings in the cylinder heads, while the brass-lined crossover/inserts protect the aluminum from salt water corrosion. Designed and manufactured in the USA!

Features

  • For 1996+ Chevy 4.3L V6 Vortec engines (8 vertical hold-down bolts).
  • Delivers maximum power and a broad torque curve for high-performance marine applications.
  • Brass-lined front water crossover and inserts help protect the aluminum from salt water corrosion.
  • Carb flange also accepts stock Q-Jet spread-bore carb.
  • Designed and manufactured in America.

Edelbrock Marine Performer Intake Manifold for Chevy 4.3L V6 Vortec

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (141-709): Black Crinkle Big Block Linear Wire Loom with Bowtie

David Ayers Leave a comment
Use This Post Clip for Email

Positioned along the valve cover to hold wires up to 8mm in a parallel orientation, black crinkle big block linear wire looms with Chevrolet Bowtie from PROFORM install using existing valve cover mounting bolts. The Bowtie is centrally positioned for maximum visibility, and the wire holders open and close individually using PROFORM’s patented nylon wedge, which allows the tops to enjoy a smooth surface free of screw holes. 141-709 includes a pair of looms.

Features

  • Fits 1965–1991 big block Chevy engines.
  • Linear style for 7-8mm wires.
  • Mounts to engine valve covers.
  • Black crinkle finish with red and black Bowtie logo.
  • Quality steel construction.
  • Officially licensed Chevrolet Performance product.
  • Sold in pairs.

PROFORM Black Crinkle Big Block Linear Wire Loom 141-709

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AutoMeter Products: Gauge Visors for 2-1/16” AutoMeter and Spek-Pro Instruments

David Ayers Leave a comment
Use This Post Clip for Email

Able to significantly improve instrument visibility by minimizing glare and reflections on gauges and your windshield, the new gauge visors from AutoMeter easily mount to any 2-1/16” AutoMeter or Spek-Pro gauge (optional spacer ring included to adjust gauge depth).

The 5324 visor is made from textured-black composite material to resist heat and UV rays for lasting good looks. You can paint it to match your custom interior scheme, and its slip-fit design lets it go on easily—no tools required.

Includes visor and spacer ring (gauges, cups, or other hardware sold separately).

Features

  • its 2-1/16” AutoMeter and Spek-Pro gauges.
  • Textured-black composite material resists heat and UV rays.
  • Paintable to match.
  • Slip-fit design goes on in minutes without tools.
  • Optional spacer ring included.

AutoMeter Gauge Visors 5324

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

The NOCO Company (G15000): UltraSafe 15-Amp Battery Charger with JumpCharge Engine Start

David Ayers Leave a comment
Use This Post Clip for Email

Boasting charge and maintenance power for 12- and 24-volt lead-acid and lithium-ion batteries, the G15000 UltraSafe from NOCO comes with a JumpStart engine start mode for dead batteries. The G15000 recovers deeply discharged batteries (down to 2 volts) thanks to rejuvenating battery-desulfating technology. Safe for a variety of applications—from cars, SUVs, and boats to RVs and diesel trucks—the G15000 offers advanced diagnostics indication and overcharge protection.

Features

  • A 12V and 24V automatic battery charger and maintainer.
  • Charges lead-acid and lithium-ion batteries up to 400 amp-hours.
  • Recovers deeply discharged batteries down to 2 volts.
  • JumpCharge engine starting for dead batteries.
  • Spark-proof technology and reverse polarity protection.
  • Built-in battery desulfator recovers worn-out batteries.
  • Safely monitors battery with zero overcharge.
  • Advanced diagnostics indication for damaged batteries.
  • Progressive repair mode for heavily sulfated 12V batteries.
  • Power supply for changing a car battery or powering 12V devices.

NOCO G15000 UltraSafe Battery Charger

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (010486): Cool Cover GOLD Air-Tube Cover Kit

David Ayers Leave a comment
Use This Post Clip for Email

Designed to reflect heat from air tubes and promote cooler air charge for additional power, the 010486 Cool Cover GOLD air-tube cover kit from DEI features high-temperature metalized polyimide lamination bonded to a robust 20 oz. heat-treated glass fiber. The material installs and removes in seconds for show-and-go convenience and fits tubing with up to a 4” diameter via unique full-length hook-and-loop fastening system.

Features

  • Reflects heat from air tubes.
  • Promotes cooler air charge for added power.
  • Installs and removes in seconds.
  • Hook-and-loop closure.
  • Fits up to 4” OD x 28” L tubing.

DEI Cool Cover GOLD Air Tube Cover Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: G-FORCE Racing Gear FIA 6pt Euro Cam Racing Harness

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we take a look at the FIA 6pt Euro Cam Racing Harness from G-FORCE Racing Gear.

Parts used in this video:

FIA 6pt Euro Cam Racing Harness (7623BK)

Want to check out more about G-FORCE Racing gear?
https://partspro.com/manufacturer/g-force-racing-gear

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flex-A-Lite: Extruded Tube Core Performance Radiators

David Ayers Leave a comment
Use This Post Clip for Email

Representing the future of performance aluminum radiators, Flex-A-Lite’s Extruded Core Technology replaces multi-core radiators with an advanced design that increases contact area between the coolant and the aluminum tubes for better heat rejection—all in a more durable and lighter package. These are direct-fit applications that bolt in without modification.

Available with or without a Flex-A-Lite electric fan, Extruded Core performance radiators are backed by the exclusive Flex-A-Lite transferable 2-year warranty.

Benefits of Extruded Core Technology

  • Increased contact area between the coolant and aluminum tubes.
  • A flat surface on which to braze the cooling fins maximizes contact between the tubes and fins.
  • Cooling fins have been designed with louver patterns cut into them to direct airflow.
  • Wind-tunnel tested to be more efficient than standard tube radiators.
  • Significantly stronger (100 PSI burst rating).
  • A corner subhead reinforces the cooling tube-to-header connection (an area prone to cracking and leaking in other brands of aluminum radiators).
  • Warranty: 2-year transferable.

Flex-A-Lite Extruded Core Radiator

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.