Category: Industry

K&N (57-1570): Air Intake System for ’14-’15 Jeep Grand Cherokee 3.0L V6 EcoDiesel

John Arnaud Leave a comment
Use This Post Clip for Email

The 3.0L V6 turbo engine in 2014–2015 Jeep Grand Cherokees provides a modest amount of power but is paired with a stock air intake system that may cause unnecessary air turbulence and slow the volume of airflow reaching the engine.

K&N has your answer. The 57-1570 air intake system is engineered to replace the factory air filter and air intake housing. Its free-flowing, roto-molded, high-density polyethylene tube is meticulously designed to be aerodynamic—and when paired with the included oversized conical air filter can increase airflow to your engine by up to 50% (the filter is washable and reusable to boot). You’ll enjoy up to 100,000 miles between cleanings under normal highway driving conditions.

K&N’s 57-1570 system also offers a black powder-coated aluminum heat shield, protecting the air filter and intake air from hot engine bays. The air intake tube funnels airflow directly into the engine’s throttle body for a guaranteed increase in horsepower and torque; in fact, dyno testing of a 2014 Grand Cherokee saw an increase of 12.67 horsepower and 30.94 ft.-lb. of torque.

Features

  • Guaranteed to increase horsepower.
  • Designed to improve throttle response and engine sound.
  • Lasts up to 100,000 miles before service is required (depending on driving conditions).
  • Replaces entire factory air intake system.
  • Free-flowing, high-density polyethylene tube.
  • Washable and reusable lifetime air filter.
  • Installation: < 90 minutes.
  • Warranty: K&N Million Mile Limited.

K&N Air Intake System for 14-15 Jeep Grand Cherokee 57-1570

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker BlackHeart: LS Swap Engine Brackets for ’79-’95 Mustang

John Arnaud Leave a comment
Use This Post Clip for Email

Hooker BlackHeart has added to the growing engine swap marketplace with engine mounting brackets for 1979–1995 Fox body/SN95 Mustang. Available for stock, Maximum Motorsports, AJE, and Team Z K-members, these brackets are designed to be used with Hooker transmission crossmembers to maintain the stock OE engine offset for compatibility with Hooker Blackheart LS swap headers.

Features

  • For 1979–1995 Mustang (Fox body or SN95) LS swaps.
  • K-member compatibility: stock, Maximum Motorsports, AJE, and Team Z.
  • For use with Hooker transmission crossmembers.

Hooker BlackHeart LS Swap Brackets for Mustang

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Pro-Flo 4 EFI Systems

John Arnaud Leave a comment
Use This Post Clip for Email

The newest generation of the self-learning Pro-Flo EFI from Edelbrock—the Pro-Flo 4—features a variety of new advancements, including an ECU with a faster processor, waterproof housing, and half the depth of its predecessor. Other overall enhancements include improved Bluetooth wireless technology, E-Tuner app with preloaded calibrations, LS compatibility, and cold start and acceleration tuning control—all while retaining the renowned Pro-Flo ease of use. A lower price even for popular Chevy, Chrysler, Ford, and Pontiac applications makes a great release even better. These Edelbrock kits are complete EFI systems: one part number, no additional components required. Now shipping!

Features

  • New lower price.
  • Complete EFI system—no additional components needed.
  • Improved Bluetooth wireless technology.
  • Easy-to-use E-Tuner app preloaded with dyno-developed calibrations.
  • Updated waterproof ECU housing now half the size.
  • Now available for popular LS platform.

Edelbrock Pro-Flo 4 EFI System

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Redhorse Performance: Dual-Feed Carburetor Kit

John Arnaud Leave a comment
Use This Post Clip for Email

Compatible with Holley Ultra XP carbs, 5950 series dual-feed carburetor kits from Redhorse Performance are hand polished, precision machined, and consistently color anodized for outstanding looks on top of dependable performance. Feature -08AN inlet x 08 ORB (outlets).

Three finishes available: Clear Anodized (5950-08-5), Black Anodized (5950-08-2), and Red/Blue Anodized (5950-08-1).

Features

  • Compatible with Holley Ultra XP carburetors.
  • Dual-feed kits.
  • Hand polished and precision machined.
  • -08AN inlet x 08 ORB (outlets).
  • Available in three anodized finishes: Clear, Black, or Red/Blue.

Redhorse Performance Dual-Feed Carburetor Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster: FlowFX Straight-Through Mufflers

John Arnaud Leave a comment
Use This Post Clip for Email

FlowFX series mufflers from Flowmaster deliver a moderate performance sound level for enthusiasts who desire a different exhaust tone than the “chambered” sound Flowmaster made famous. FlowFX mufflers are made from fully welded stainless steel with all the quality the company is known for.

Features

  • Durable, fully welded 409 SS.
  • Moderate exterior performance tone.
  • Straight-through design.
  • Warranty: 1 year limited.

Flowmaster FlowFX Straight Through Muffler

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

LEED Brakes (FC2001SM): Spindle-Mount Front Disc Brake Conversion Kit for Mopar A-Body

John Arnaud Leave a comment
Use This Post Clip for Email

Front disc brake conversion kit from LEED Brakes adds safety, reliability and performance to your Mopar A-body with 10” drum brake spindles. The FC2001SM kit provides everything you need to bolt on factory-style, four-piston disc brakes to original drum brake spindles—no cutting or welding required. All-new, high-quality, precision-machined components.

Features

  • For Mopar A-body with 10” drum brake spindles.
  • Large 5” x 4” bolt pattern only.
  • Bolt-on installation: no welding or cutting needed.

LEED Brakes Spindle Mount Front Disc Brake Conversion Kit for Mopar A-Body

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Superchips: Get $50 Back on Qualifying Flashpaq Tuners

John Arnaud Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid May 1 to June 30. Click image for details!

 

Superchips $50 Back on Flashpaq

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edge Products: Free EGT/EAS Product on Qualifying CTS2 Purchase

John Arnaud Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid May 1 to June 30. Click image for details!

 

Edge Products Free EAS EGT Promotion

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

G-FORCE Racing Gear: GF-525 Racing Suit

John Arnaud Leave a comment
Use This Post Clip for Email

With multiple layers constructed from a proprietary blend of Pyrovatex fabric and classified materials, the one-piece GF-525 racing suit from G-FORCE Racing Gear boasts specs that exceed SFI 3.2A/5 specifications and achieve a 21 TPP rating. The GF-525 racing suit includes a moisture-wicking inner layer, attractive semi-gloss finish, and straight epaulets for a shoulder horizon that screams “professional racer.” Other features include 360-degree knit arm gussets for full range of motion, form-fitted waistline, boot-cut pant legs, smartly designed pockets, and an SFI 3.2A/5 tag on the left arm cuff for easy inspection.

Features

  • SFI 3.2A/5 certified; TPP 21 rated.
  • Proprietary fabric blend of Pyrovatex and classified material.
  • One-piece, multilayer suit.
  • Moisture wicking and breathable.
  • Semi-gloss finish.
  • Clean, professional look.

G-FORCE Racing Gear GF-525 Racing Suit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Trans Dapt Performance: PerfectMatch Engine Dress Up Kits

John Arnaud Leave a comment
Use This Post Clip for Email

PerfectMatch engine kits from Trans Dapt Performance deliver everything for harsh under-hood environments along with the best factory color matching on the market for your classic Ford or Chevy project. These quality powder-coated engine dress-up kits add finish and detail, giving your bay a quick, easy, and show-worthy appearance. Including valve covers, a timing cover, water neck, breathers, and necessary gaskets and hardware, PerfectMatch engine kits from Trans Dapt are a “perfect match” for your classic small-block Chevy, big-block Chevy, or small-block Ford project.

Features

  • For SBC, BBC, or SB Ford applications.
  • Powder coated and factory color matched.
  • Includes a timing cover, water neck, breathers, valve covers, and necessary hardware/gaskets.

Trans Dapt PerfectMatch Engine Accessory Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.