AIRAID (350-318): Cold Air Dam Intake for 2011-2015 Dodge Charger 5.7L

AIRAID’s 350-318 cold air dam (CAD) air intakes for the 2011-2015 Dodge Charger 5.7L are engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by CAD panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and use any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment by sealing to the underside of the hood via blade-style weather stripping. Some CAD systems connect to the factory air intake tube while others use a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and provides superior filtration. This CAD air intake is easy to install with common hand tools and is backed by AIRAID’s exclusive No-Hassle Lifetime Warranty.

AIRAID 350-318
AIRAID 350-318

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock (4277): Ford FE Elite II Valve Covers

Edelbrock 4277 Elite II valve covers are now available for Ford FE engines. The next generation of Elite Series accessories, Elite II, are a modern take on a classic design. They’re made from heavy-gauge, die-cast aluminum and are finished off with a show-quality polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Elite II Series Valve Covers are available in polished finish ONLY!

Edelbrock_4277
Edelbrock_4277

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hurst Shifters (1745000): Roll Control with Stainless Valve

Used primarily in drag racing to provide positive locking action to the front wheels of race cars, reducing the chance of “rolling the lights” and producing more effective “burn outs” for heating up the tires. Rigorous testing has proved a 1/100,000 of a second release time, and vibration tests have seen up to 30 Gs applied without mechanical failure. Adaptable to most domestic and import hydraulic brake systems. Advanced stainless steel valve assembly for ultimate corrosion resistance. Fully enclosed epoxy-molded electrical coil for reliability. Attractive finned aluminum housing helps dissipate heat. Wider lightweight base provides better mounting stability, while 150-micron screen-filtered ports prevent contamination. Field serviceable for cleaning or rebuilding. Extra threaded port for separate bleeder or brake line pressure gauge.

Hurst Shifters 1745000
Hurst Shifters 1745000

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley (550-422): Terminator EFI 24X LS with Transmission Control

Get all the great features of the Terminator Throttle Body Fuel Injection system in a bolt-on system for GM’s popular LS engines! These systems are designed specifically for LS engines with carbureted-style intake manifolds. All kits include the popular Terminator EFI Throttle Body for fuel delivery into the intake plenum, as well as the necessary wiring to plug directly into the factory LS coil sub-harnesses and sensors. Kits with the transmission control option allow customers to control their 4L60E/4L80E transmissions in addition to fuel and spark. Best of all, every kit includes a 3.5” touchscreen, so no laptop is required. Just install, answer a few basic questions, and drive!

Holley 550-422
Holley 550-422

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

DEI (010636): Silicone Protect-A-Wire Kit

25 ft. of black silicone with numbered shrink tube ends to label plug wires to the correct cylinder.

Kit includes:

  • 25’ of 3/8” ID silicone–covered annealed fiberglass sleeve
  • 8 DEI-branded high-heat shrink tube ends
  • 8 numbered 1–8 high temp shrink tube ends

Annealed fiberglass sleeve is coated with silicone, providing excellent endurance against abrasion, fraying, and puncture. Resistance to chemicals, flexibility, and 400˚F operating temperature make it the perfect choice to cover and protect your spark plug wires. High dielectric strength for high-voltage coils and ignition systems.

DEI 010636
DEI 010636

 
   
 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce (601825): Throw Out Bearing

The new Centerforce® Hydraulic Release Bearing provides smooth, consistent pedal effort for superior clutch operation. Pair with a Centerforce clutch, featuring our patented centrifugal weight system, for a total performance clutch package.

Centerforce’s Hydraulic Release Bearing (601825) is available for Ford Mustang and Mustang Cobra 6- and 8-cylinder engines:

  • 2005-2007 4.0L 245” 6-Cylinder Engine
  • 2005-2010  4.6L 280” SOHC 3V 8-Cylinder GT with a 6-Bolt Crank
  • 2005-2010 4.6L 280” SOHC 3V 8-Cylinder GT with the Aftermarket 8-Bolt Crank
  • 2005-2010 4.6L 280” SOHC 8-Cylinder GT with 26-Spline Aftermarket Transmission with a 6-Bolt Crank
  • 2005-2010 4.6L 280” SOHC 8-Cylinder GT with 26-Spline Aftermarket Transmission with an Aftermarket 8-Bolt Crank
  • 2006-2008 5.4L Supercharged Shelby GT500

    Centerforce 601825
    Centerforce 601825

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-2571): 57 Series FIPK Performance Intake System for 2007-2009 Ford Mustang Shelby 5.4L

Ford’s 2007–2009 Shelby Mustangs certainly have amazing horsepower capabilities, but K&N has created custom air intakes for them that will coax out even more performance, acceleration, and torque.

The heat shield of the 57-2571 57 Series isolates the filter element from the heat of the engine, resulting in an immediate flow of cooler air for additional power. In addition, these intakes eliminate much of the air path restriction and let their engines breathe more freely. K&N air intake systems come with the famous K&N Million Mile Limited Warranty.

K&N 57-2571
K&N 57-2571

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker Headers: Blackheart Exhaust Systems for 2009-2014 HEMI-Equipped 5.7L/6.1L/6.4L V8 Challenger/Charger/300

At the heart of any performance vehicle is the exhaust system. Hooker Headers, with its classic heart logo, has been at the center of the exhaust industry for decades. Hooker continues to push the boundaries of performance with its new Blackheart line of performance exhaust systems for popular late-model vehicles. The Blackheart line is truly a platform-designed full exhaust program. From the cylinder head flange to the tailpipe, Blackheart is engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality!

Hooker 705002305-RHKR
Hooker 705002305-RHKR

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AEM Induction Systems (28-50029): DryFlow Air Filter for 2015 Ford Mustang

The AEM DryFlow 2015 Ford Mustang replacement air filter is designed to fit directly into the stock air filter box of 2.3L EcoBoost, 3.7L V6, and 5.0L V8 models. This reusable air filter is precision-engineered to be a direct air filter cross reference for the disposable factory air filter and installs in the factory air filter box in minutes. An AEM replacement DryFlow air filter is constructed using a durable urethane sealing lip to help ensure a positive, airtight seal to ensure high filtration efficiency.

AEM 28-50029
AEM 28-50029

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowtech (51600FLT): Axle-Back Exhaust Kit for 2010-2015 Camaro SS 6.2L

Flowtech Exhaust Products are the perfect combination of quality and value. This Axle-Back kit fits the latest generation 2010-2015 Camaro SS 6.2L V8 engine.

  • Quality welds for strength, longevity, and good looks
  • Constructed of lightweight, 18-gauge stainless steel for maximum strength and durability
  • High-flow, straight-through polished mufflers produce an aggressive exhaust note under acceleration and a mellow tone at idle
  • 4” dual-wall polished tips add slick styling
  • Axle back uses factory mounting points for easy installation
  • Tube geometry is designed for maximum ground clearance
Flowtech 51600FLT
Flowtech 51600FLT

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.