Category: News

Mishimoto (MMBCC-CF): Carbon Fiber Baffled Oil Catch Can

David Ayers Leave a comment
Use This Post Clip for Email

Mishimoto continues to swing big in its ceaseless quest to “push the limits,” and it’s hit another winner with its all-new carbon fiber baffled oil catch can. This product enjoys an increased 7.4 fl. oz. capacity and 3K carbon fiber construction, which combine to reduce weight and enhance the aesthetic of your engine bay.

The MMBCC-CF features a uniquely designed baffle insert that makes short work of separating oil and blow-by contaminants. Clean air is then routed through Mishimoto’s high-flow filter material, which further guards against any rogue oil droplets without compromising the improved airflow characteristics—even in freezing weather.

Servicing and fluid checks are now easier, too, thanks to the quarter-turn lid. Both the catch can and filter are fully serviceable. Backed by Mishimoto’s lifetime warranty.

Features

  • 3K twill-weave carbon fiber reduces weight and improves engine bay look.
  • Quarter-turn lid makes checking levels quick while still providing an airtight seal.
  • 4 fluid ounce capacity lengthens service intervals.
  • Cyclone baffle blades were designed using computational fluid dynamics for improved air-oil separation.
  • High-flow filter adds an extra layer of protection without affecting PCV/CCV pressures on high-boost applications.
  • Universal CNC billet bracket mounts the can securely.
  • Safe for pressurized applications.
  • Filter and can are fully serviceable.
  • Warranty: lifetime.

Mishimoto Carbon Fiber Baffled Oil Catch Can MMBCC-CF

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: Hurst Billet Plus Shifter

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the Billet Plus Shifter from Hurst on a 2014 Camaro V6.

Parts used in this video:

Billet Plus Shifter w/ Classic Ball (3916029)

Want to check out more about Hurst?
https://partspro.com/manufacturer/hurst

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hedman Hedders: GM A-Body Headers for ’64-’67 Big-Block Chevy

David Ayers Leave a comment
Use This Post Clip for Email

Offering excellent ground clearance and awesome horsepower, big-block GM A-Body headers from Hedman Hedders are the only mid-length headers for 1964–1967 Chevrolet Chevelle, El Camino, and GTO. The advantage these headers have is that they don’t hang below the frame rails like the long-tube headers for those vehicles, sparing them from road hazards like bumps and driveways. They fit automatic transmission–equipped models and are compatible with A/C and power steering. The shorter, mid-length headers provide superb ground clearance—especially for lowered, pro-touring style builds—yet offer superior performance over short-tube headers or factory manifolds.

Hedman makes these headers in the USA from mandrel-bent, 1-3/4” primary tubes, with 3/8” header flanges and a 3” ball/socket-style gasket-free collector. The larger, free-flowing tubes improve exhaust scavenging to produce excellent horsepower and throttle response from your Rat motor. Hedman backs header construction with a lifetime warranty, and all factory-applied finishes are warrantied for five full years. Available finishes include HTC polished silver ceramic (68666), Black Maxx ceramic-metallic (68663), or uncoated (68660).

Features

  • For 1964–1967 GM A-Body.
  • Excellent ground clearance and terrific horsepower.
  • Compatible with automatic transmission, air conditioning, and power steering.
  • Mandrel-bent 1.75” primary tubes.
  • Includes gaskets, header/collector bolts, and bolt-on header collector adapters.
  • Made in the USA.
  • Warranty: lifetime (construction), 5 years (finish).

Hedman Hedders GM A-Body Headers for 64-67 BBC

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock: Performer RPM Small-Bore Cylinder Heads for Small-Block Chevrolet

David Ayers Leave a comment
Use This Post Clip for Email

Performer RPM small-bore cylinder heads from Edelbrock are designed for use with 265, 283, 305, and 307 cid small-block Chevy engines with 3.736” to 4.000” bores produced from 1954 to 2003. They have the same great features as every Performer RPM series cylinder head—thick deck, extra-thick port walls, high-flowing ports, ductile iron seats, and high-quality rocker studs—plus state-of-the-art compact combustion chambers and efficient ports that offer improved performance throughout the RPM range. Builders will also find threaded inserts in the rocker studs and exhaust bolt holes for superior strength and durability, as well as manganese-bronze valve guides. Sold singly.

Features

  • For 1954–2003 small-block Chevy engines with 3.736” to 4.000” bores.
  • For SBC engines with 265, 283, 305, or 307 cubic inch displacement.
  • Valve spacing has been reduced to 1.817” to accommodate the smaller bores.
  • Retains stock straight spark plug angle and exhaust flange bolt pattern.
  • Uses the early Gen 1 (1959–1986) valve cover bolt pattern.
  • Cast from A356 aluminum and heat treated to T-6 specs.

Edelbrock Performer RPM Small-Bore Cylinder Heads for SBC

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

G-FORCE Racing Gear: REVO Carbon Full-Face SA2015 Helmet

David Ayers Leave a comment
Use This Post Clip for Email

With its premium fit and carbon-finished shine, the new REVO Carbon full-face helmet from G-FORCE Racing Gear is engineered to SNELL SA2015 specifications. This helmet does an excellent job of moving heat thanks to G-FORCE’s Siphon12 Ventilation Network, a system of six intake ports, two forehead ports, and four rear exhaust ports. The REVO Carbon helmet also features an optically corrected clear view shield (tinted shields available and sold separately), multiple-density impact liner, and removable cheek pads.

Available in XSM, SML, MED, LRG, XLG, and XXL.

Features

  • Meets SNELL SA2015 specs.
  • Carbon composite shell.
  • Flame-retardant liner in a modern fit.
  • Removable cheek pads.
  • Siphon12 Ventilation Network to move heat away from the head.
  • Reinforced mounting points for restraint devices.

G-FORCE Racing Gear REVO Carbon Full-Face Helmet

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley Sniper EFI BBD for Jeep CJ 550-858

Holley (550-858): Sniper EFI BBD for Jeep CJ

David Ayers Leave a comment
Use This Post Clip for Email

If you’re tired of struggling with your old BBD Jeep carburetor, or your off-road rig leaves you hanging at extreme angles while on the trail, Holley has your solution. The Sniper EFI BBD for Jeep CJ is right at home on any 258ci-powered trail rig or weekend cruiser. Not only does the Sniper EFI BBD offer superior throttle response and WOT power, but you also gain timing control. Put an end to cold start issues, hesitations, vapor lock, and flooding by upgrading to a Sniper EFI BBD from Holley.

Features

  • For 1971–1986 Jeep CJ with 258ci six-cylinder engine.
  • Bolt-on BBD replacement carburetor.
  • Throttle body–mounted ECU (no extra boxes to mount).
  • Supports up to 350 HP with two 100 lb./hr. injectors.
  • Only 4 wiring connections required (battery + and – , switched ignition, and RPM).
  • Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 PSI).
  • Integrated ignition timing control.
  • High-resolution full-color touchscreen.
  • Simple calibration wizard—no laptop required.
  • Self-tuning ECU.
  • Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn.
  • OEM-style TPS/IAC and fuel pressure regulator.
  • Clamp-on oxygen sensor kit for 2.25” exhaust.

Holley Sniper EFI BBD for Jeep CJ 550-858

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: SCT BDX Performance Programmer

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the BDX Performance Programmer from SCT on a 2016 Mustang GT V8.

Parts used in this video:

BDX Performance Programmer (40490)

Want to check out more about SCT?
https://partspro.com/manufacturer/sct

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

LEED Brakes: Power Disc Brake Conversion Kit with Pre-Bent Brake Line for ’65-’66 Ford Mustang

David Ayers Leave a comment
Use This Post Clip for Email

Drum-to–power disc conversion kit from LEED Brakes adds safety, reliability, and performance to your 1965–1966 Ford Mustang. The FC0001-H405ALK kit gives you everything you need to mount factory-style four-piston disc brakes to your Mustang’s original drum brake spindles—with no cutting, drilling, or welding required. Enthusiasts also get a complete pre-bent Ford brake line kit that fits both single- and dual-exhaust applications. All components are new, high-quality, precision-machined products. All-in-all, a great kit with a factory look and easy installation.

Note: For vehicles with automatic transmission; however, will fit most manual shift cars equipped with aftermarket cable-style clutch.

Features

  • For 1965–1966 Ford Mustang.
  • Mount four-piston disc brakes to original drum brake spindles.
  • Bolt-on installation: no cutting, drilling, or welding.
  • Includes pre-bent Ford brake line kit (single- and dual-exhaust applications).
  • Automatic transmissions only (or manuals equipped with aftermarket cable-style clutch).

LEED Brakes Power Disc Brake Conversion Kit with Pre-Bent Brake Line

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PowerTrax: Lock-Right Locker Differential

David Ayers Leave a comment
Use This Post Clip for Email

With more than 60 different models fitting over 100 vehicle types—including trucks, cars, Jeeps, and competition vehicles—the Lock-Right Lock locking differential from PowerTrax can be installed in existing case assemblies without any special tools or setup required. This fully automatic product sends engine power to the wheels requiring the most traction.

Designed to fortify vehicles that engage in demanding off-road or extreme-traction situations, the Lock-Right Locker eliminates wheel spin-up and any associated driveline trauma. This enhances the strength and integrity of the original case. Indeed, cases that occasionally fail with open or limited-slip/posi differentials become one of the strongest links in the drivetrain when equipped with a PowerTrax Lock-Right Locker.

Note: Recommended for vehicles primarily driven in severe driving conditions or during recreational off-road use. Daily drivers might benefit more from a more mainstream PowerTrax application.

Features

  • Designed for vehicles driven in severe driving conditions or for recreational off-road use.
  • Fully automatic system sends engine power to the wheels that need the most traction.
  • Eliminates wheel spin-up and associated driveline trauma.
  • Enhances strength and integrity of original differential case.

PowerTrax Lock-Right Locker Locking Differential

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Flowmaster (817845): Cat-Back 409S Outlaw Exhaust Kit for ’17-’18 Dodge Charger R/T and Daytona with 5.7L Engine

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking for aggressive exterior and interior sound for your 2017–2018 Dodge Charger R/T or Daytona with 5.7L engine, the Outlaw cat-back exhaust system is your pick. Perfect for drivers unafraid of the extra attention this system is sure to draw, the Flowmaster 817845 kit features 3” 409 stainless steel, mandrel-bent tubing; a pair of race-inspired Outlaw Series mufflers; and a 3” Scavenger Series X-pipe for maximum performance. The tailpipes include active exhaust valves and are finished with 4” stainless steel tips that exit the factory exhaust cutouts.

Designed for an easy fit, this Flowmaster system includes all necessary parts, hardware, and installation instructions. Manufactured in the USA.

Features

  • For 2017–2018 Dodge Charger R/T and Daytona with 5.7L engine and standard bumper cutout.
  • Dyno-tuned for maximum performance.
  • 409 stainless steel construction.
  • Easy installation.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster Cat Back 409S Exhaust Kit for Charger RT and Daytona 817845

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.