Category: News

PROFORM (67657): Piston Ring Friction Pull Measurement Tool for 2.377-6.250” Bores

David Ayers Leave a comment
Use This Post Clip for Email

Minimizing piston ring friction before blow-by is one of the best ways to maximize engine efficiency, and the patented piston ring friction pull measurement tool from PROFORM is the tool you need for the job. The 67657 kit includes two expandable platforms for pulling and a precision digital gauge for accurate readings. Tool fits ring bore diameters between 2.377” and 6.25” and includes a foam-lined hard carry/storage case. Get it right and get the trophy!

Features

  • Patented adjustable adapters fit bores 2.377–6.250”.
  • 0–12 lb. digital gauge.
  • 1 oz. resolution.
  • Includes foam-lined hard shell case.
  • Sold individually.

PROFORM Piston Ring Friction Pull Measurement Tool 67657

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Mishimoto: Baffled Oil Catch Can Kit for ’07-’11 Jeep Wrangler JK

David Ayers Leave a comment
Use This Post Clip for Email

The baffled oil catch can kit from Mishimoto for 2007–2001 Jeep Wrangler JK (MMBCC-WR6-07PBE) reduces the amount of harmful blow-by oil that coats your intake tracts and cakes your valves with carbon deposits. Specially designed internal air diverters slow incoming air for more effective air/oil separation, while a 50-micron bronze filter combs the air and an internal aluminum baffle prevents any caught content from being recirculated back into the system.

The one-piece, 2.5mm-thick steel bracket was engineered to withstand off-road stresses, and mounts securely to the chassis in an optimal position that avoids the bulk of chassis movement. Installing this direct-fit kit takes about only an hour from beginning to end. Product backed by Mishimoto’s lifetime warranty.

Kit Contents

  • 1 application-specific mounting bracket.
  • 1 black-anodized 6061 aluminum catch can.
  • 2 silicone hoses.
  • 2 plastic barbed fittings.
  • 4 worm gear clamps.
  • 1 bronze filter.
  • 1 air diverter.
  • 1 internal baffle and rod.
  • 1-3/8” NPT plug.
  • 1 large O-ring.
  • Mounting hardware.

Features

  • Internal air diverter increases air turbulence to improve oil separation.
  • Helps maintain proper octane levels to reduce potential detonation.
  • Fully serviceable filters and cans.
  • High-quality O-ring ensures a tight seal.
  • Thick 2.5mm bracket won’t bend, rattle, or break under heavy abuse.
  • Direct-fit bracket mounts can in serviceable location.
  • Warranty: lifetime.

Mishimoto Baffled Oil Catch Can Kit for JK

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hooker: Street Tease Exhaust Cutouts

David Ayers Leave a comment
Use This Post Clip for Email

Hooker has updated an old idea with modern materials with its Street Tease exhaust cutouts, whose stainless steel and aluminum elements will keep out the weather and give you sound and performance control with a flip of the toggle (single kits) or push of the remote button (dual kits).

Street Tease exhaust cutouts provide instant gains when opened, while their stainless tips can be positioned for any exhaust direction. Plus, they power easily by plugging into your 12V cigarette lighter.

Features

  • TIG-welded T-304 stainless steel tubing for a clean and weather-resistant finish.
  • 6061 aircraft aluminum motor and valve bracket.
  • Instant performance gains when opened.
  • Dual kits include a “Y” cable for simple wiring and simultaneous valve operation.
  • Single kits have a toggle switch to operate the valves while dual kits have a remote.
  • Stainless tip can be positioned to achieve any exhaust direction.
  • Components available separately.
  • Simple 12-volt cigarette lighter plug-in for main power supply.

Hooker Street Tease Exhaust Cutouts

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

SA Design (SA396): Cartech’s Jeep CJ 1972-1986: How to Build & Modify

David Ayers Leave a comment
Use This Post Clip for Email

Calling the Jeep CJ the most popular series of off-road vehicles ever built may still be understating the truth. In addition to being the only model equipped with a V8 engine in any meaningful way, the platform combines the ruggedness of early Jeeps with some of the advancements in horsepower of a more modern era. CJs are truly both fun to own and modify.

In the Cartech book Jeep CJ 1972–1986: How to Build & Modify by Jeep guru Michael Hanssen, you’ll learn about all of the systems that can be upgraded to improve your CJ’s performance. Upgrades include suspension components such as springs, shocks, and steering modifications; driveline components including differentials, transmissions, transfer cases, and axles; engine upgrades including engine swaps; wheel and tire upgrades; aftermarket accessories; armor such as skid plates and bumpers; brake upgrades; and more.

Whether you are looking to get into serious off-roading or just want to inject a little more fun into your classic CJ, Cartech’s Jeep CJ 1972–1986: How to Build & Modify will be a worthwhile and valuable addition to your library or shop.

Pages: 144
Size: 8.5” x 11”
Format: Paperback
Illustrations: 382 color

Cartech Jeep CJ 1972-1986 How to Build and Modify

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Insight Account System: One Login, Endless Possibilities

David Ayers Leave a comment
Use This Post Clip for Email

The Web-based Insight™ account system from The AAM Group™ gives you one-login access to nearly all of your Parts Pro™ program benefits. Available at accounts.theaamgroup.com, Insight™ eliminates the need to maintain multiple user names and passwords. Nearly everything you need to maximize your program participation is included on Insight™, including our exclusive Price Manager tool, rebates, news, rental car discount codes, POP Catalog, On the Map™ dealer-locator request system, and much more!

Each Insight™ access point is called a portal, which you can select with just a click from your desktop computer or mobile phone. You can “star” frequently used portals, which conveniently moves them to the top of the page, toggle between icon and list view, and even search for portals you need to use. Many portals even include instructional videos you can view right on the page to help you get the most out of your Parts Pro™ tools. Insight™ is a permission-based system, so you’ll always see everything you have access to.

Insight™ assists first-time users with a brief tutorial to help you get started, while a help video answers even more questions. To get started with this powerful tool, visit accounts.theaamgroup.com today! If you don’t already have an account, you will be prompted to create one.

Insight Logo

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Energy Suspension (4.1137): Polyurethane Motor and Transmission Mount Set for Early Small-Block V8 Ford

David Ayers Leave a comment
Use This Post Clip for Email

Energy Suspension has just what you need to stabilize your Ford or Lincoln drivetrain and experience power-to-the-ground performance: its 4.1137 polyurethane motor and transmission mounts. These durable mounts are more compliant than solid mounts and help prevent costly drivetrain damage by stabilizing your engine and transmission. The race-proven, driver-friendly Hyper-Flex polyurethane is mounted between zinc-plated metal brackets to outlast and outperform OE rubber replacement mounts. Change in NVH may occur. Available in Red and Black.

Application List

  • 1964–1970 Ford Fairlane
  • 1966–1970 Ford Falcon
  • 1967–1972 Ford Mustang
  • 1966–1971 Ford Ranchero
  • 1968–1971 Ford Torino
  • 1966–1967 Mercury Comet
  • 1967–1972 Mercury Cougar
  • 1969–1973 Mercury Montego

Energy Suspension Polyurethane Motor and Transmission Mount Set for Early SB Ford

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock Pro-Flow 3 EFI 3220

Edelbrock (3220): Pro-Flo 3 EFI for 1986-and-Earlier Small-Block Chevy with Standard Heads

David Ayers Leave a comment
Use This Post Clip for Email

The Satin-finished, sequential-port 3220 Pro-Flo 3 EFI system from Edelbrock gives you the performance and look of true fuel injection without the complexity of tuning calibrations and related tables.

The key to the system is the free E-Tuner Android app that uses a Bluetooth connection to communicate with the ECU to continually adjust calibration for maximum performance—no laptop required. The E-Tuner app also contains dyno-tuned base calibrations for your specific application to simplify getting up to speed. Plus, it allows you to control both fuel and spark without pulling over. You’ll enjoy comprehensive control of your system while driving, with the ability to adjust air-fuel ratio, ignition curve, idle speed, acceleration fuel, coolant fans, rev limiter, and more! Includes 7” tablet.

Features

  • Standard head kit for 1986-and-earlier SBC.
  • Ready to run out of the box.
  • Converting to EFI will increase your engine’s performance and gas mileage.
  • No laptop tuning required—automatic system calibration while driving.
  • Capable of direct driving an ignition coil—no CDI box required.
  • Industry-leading dedicated support staff to answer your questions.

Edelbrock Pro-Flow 3 EFI 3220

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Cometic Gasket (PRO1007T): StreetPro Top-End Gasket Kit for GM Gen III LS Small Block V8

David Ayers Leave a comment
Use This Post Clip for Email

StreetPro gasket kits from Cometic Gasket cater to budget-minded street-rodders who want all required gaskets and seals for their rebuild. Quality gasket materials are a priority in StreetPro kits, which include the following materials: MLS, AFM, Aramid Fiber, and Armor Clad. StreetPro kits are sold as both top- and bottom-end kits. Purchase one of each for a total engine rebuild. PRO1007T is a top-end kit.

Features

  • Top-end kit for GM Gen III LS small block V8.
  • Budget-minded gasket/seal rebuild solution.
  • MLS, AFM, Aramid Fiber, and Armor Clad materials.

Cometic Gasket StreetPro Gasket Kit for GM Gen III LS V8 PRO1007T

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

B&M (80843): Pro Ratchet Automatic Shifter with Simulated Carbon Fiber Cover

David Ayers Leave a comment
Use This Post Clip for Email

Want to add a high-tech look to your vehicle’s interior without the cost of genuine carbon fiber? The 80843 Pro Ratchet shifter is one of B&M’s most popular and easiest-to-operate race shifters, boasting a hydro-dripped aluminum cover to simulate carbon fiber.

Performance features include a positive ratcheting design with reverse lockout (meets NHRA and IHRA safety regulations), a backup light switch, a neutral safety switch, and white shift knob with B&M logo medallion.

Kit includes a 5’ super-duty shifter cable and all the brackets, hardware, and instructions necessary for an easy installation on most 3- and 4-speed automatic transmissions.

Note: Some transmissions may require optional installation kits.

Features

  • Reverse lockout meets NHRA/IHRA requirements.
  • Quality carbon fiber look without the cost.
  • Reliable and race-proven shifter design.
  • Includes super-duty race cable.

BM Pro Ratchet Automatic Shifter with Carbon Fiber Cover 80843

 

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AAM GROUP PARTNERS WITH GREG GRIFFITH AND MANCAVE DESIGNS IN 2017 SEMA PROJECT VEHICLE: RENEGADE III

David Ayers Leave a comment
Use This Post Clip for Email

Renegade III Greg Griffith AAM Group

October 26, 2017 (JOHNSON CITY, Tenn.) — The AAM Group™, the largest program distribution group in the SEMA marketplace, is jointly announcing the 2017 SEMA project vehicle Renegade III: a 1974 Jeep CJ-5 that has been taken to the ground and reconstructed with modern enhancements any 1970s owner would have loved. Renegade III is being outfitted by the biggest names in the automotive aftermarket—most of them sponsoring manufacturers of the Total Truck Centers™ or Parts Pro™ jobber marketing program. The Jeep will make its exhibition debut at the SEMA Show in Booth SL08 in the South Hall, Lower Level.

Renegade III was conceived, designed, and managed by AAM Program Sales Manager Greg Griffith and built by the Mancave Designs team. In addition to the modern upgrades, OE enhancements, and custom touches, the Jeep includes several “Hidden Mickeys”: Mickey Mouse silhouettes placed throughout the build. Griffith originally bought the Jeep as a modest cruiser for his wife, a former Disney cast member and enthusiastic fan, and Renegade III exists as both a salute to her and a one-of-a-kind vehicle that brings together two iconic brands.

“One of the best things about this project was that it allowed us to include both our truck and performance manufacturers on one build,” said Griffith. “The support they gave us was simply outstanding. This build should have taken four years under normal circumstances, but our team pulled it together in just over nine months. I am very proud of this Jeep, as she continues our tradition of bringing unique looks and stances to SEMA—plus, blending old with new and showcasing some really crafty parts.”

Total Truck Centers™ and Parts Pro™ Sponsors

AutoMeter Products, Bestop, CURT, Driven Racing Oil, Edelbrock, Flex-a-lite, Flowmaster, Husky Liners, Motive Gear, MSD Performance, Omix-ADA, OPTIMA Batteries, Powermaster, Rancho, Scorpion Protective Coatings, TEN Factory, Vision X, and WARN.

Additional Sponsors

BFGoodrich, Clifford Performance, Harland Sharp, Hi-Lift, Kicker, Painless, Raceline Wheels, SPIDERWEBSHADE, Straub Technologies, and Tuffy.

Custom Services

James Belcher and Mancave Designs

Lift Services

Joey Yokum at Atomic City 4×4 in Oak Ridge, Tenn. 865-481-8006

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.