Category: News

2015 PRI Show – Flaming River

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Flaming River’s very own Brett Domin goes over some of their new rack and pinion kits for 2016. Be on the lookout for more videos from this series over the coming weeks.

Ready to buy or have questions? Find your local Parts Pro Performance Center here: http://partspro.com/cms/store-locator/

Want to subscribe? Click here: http://bit.ly/21cab1e

Check out Parts Pro on Facebook: https://www.facebook.com/PartsProCenters

Want to check out more about Flaming River? http://partspro.com/cms/manufacturer/50/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – Energy Suspension

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Energy Suspension’s very own Michael Santa Cruz goes over their new suspension components for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

DEI (010114): Speed Sleeves Exhaust Wrap Jackets

David Ayers Leave a comment
Use This Post Clip for Email

Speed Sleeves from Design Engineering, Inc. (DEI) provide everything you need to cover and protect primary exhaust header pipes. Use them as an alternative to wrapping complete headers as well as for spot protection from heat-generating pipes and manifolds. Speed Sleeves are easily installed in tight engine compartments, and are great for troubleshooting components near exhaust headers, such as ignition wires or fuel lines.

  • Insulate pipes and protect from radiant heat.
  • Easy and simple to install.
  • Cover pipes up to 2.25” in diameter.
  • Include 8” exhaust wrap, lock fasteners, and locking ties.
DEI (010114): Speed Sleeves Exhaust Wrap Jackets
DEI (010114): Speed Sleeves Exhaust Wrap Jackets

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro

David Ayers Leave a comment
Use This Post Clip for Email

With a continuous temperature rating of between -94° and 257° F and a melting point of 482° F, the PowerBraid from Painless Performance is engineered to enhance and protect the insulation of any electrical wire bundles or cables. In addition, it cleans up cluttered and unsightly engine bays. This kit is for use with any of the following second-generation Camaro harnesses: 20112, 20113, or 20114.

Made from tough-woven, flexible, and semi-rigid material, PowerBraid provides excellent drainage and maintains superior abrasion resistance. The split loom design has a minimum overlap of 25 percent, allowing for easy installation and optimal wiring protection. The 70923 kit includes multiple PowerBraids in various lengths and widths, plus heat shrinks, tie wraps, and rolls of electrical and stretch/seal tape.

  • Flexible, tough, semi-rigid protection for electrical wire bundles/cables.
  • Continuous temperature rating of -94° to 257° F.
  • Melting point: 482° F.
  • Split loom design with 25% overlap.
  • Includes various PowerBraids, heat shrinks, tie wraps, and tape.
  • Keeps engine compartment looking sharp.
Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro
Painless Performance (70923): PowerBraid Kit for Gen 2 Camaro

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edelbrock (14073): Performer Series 750-cfm Manual Choke Carburetor

David Ayers Leave a comment
Use This Post Clip for Email

Calibrated for performance, the 14073 750-cfm Manual Choke Carburetor from Edelbrock provides optimum street performance in small- and big-block engines with Performer RPM, RPM Air-Gap, or Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes both timed and full vacuum ports for ignition advance.

Made from black powder-coated aluminum, this carb provides cooler operating temperatures and less warping. Intended for stock to performer-level applications and calibrated for fuel economy.

  • Single-inlet, manual choke.
  • 750 cfm, 4 bbl, square bore.
  • Metering jets: .113 primary and .107 secondary.
  • Metering rods: .071 x .047.
  • Step-up spring: orange (5” Hg).
  • Made in the USA.
Edelbrock (14073): Performer Series 750-cfm Manual Choke Carburetor
Edelbrock (14073): Performer Series 750-cfm Manual Choke Carburetor

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Holley: Sniper Self-Tuning EFI

David Ayers Leave a comment
Use This Post Clip for Email

The Sniper Self-Tuning EFI from Holley brings EFI within range of your build budget. The Sniper is economically priced to give you all the benefits of EFI with money left over to finish or upgrade the rest of your ride. Perfect for street rods, muscle cars, off-road trucks, or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding with the Sniper!

Coming June 2016!

  • Bolt-on carburetor replacement (designed to fit single and dual carb manifolds).
  • Throttle body–mounted ECU—no extra boxes to mount.
  • Supports up to 600 hp or 1,200 hp (4- and 8-injector versions, respectively).
  • Four-wire vehicle connection (battery +, battery –, switched ignition, and rpm).
  • Integrated fuel pressure regulator, timing control, and coil driver.
  • Color touchscreen for setup and gauge views.
  • Calibration wizard—no laptop required!
  • Self-tuning convenience.
  • Available in base and master kits (complete fuel systems).
Holley: Sniper Self-Tuning EFI
Holley: Sniper Self-Tuning EFI

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – Driven Racing Oil

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Driven Racing Oil’s very own Scott Diehl goes over their new performance oil products for 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 PRI Show – ACC Performance

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, ACC Performance’s very own Nelson Gill goes over their new focus on engineering in 2016. Be on the lookout for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Parts Pro retailer to find out more: http://partspro.com/cms/store-locator/

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor

David Ayers Leave a comment
Use This Post Clip for Email

In circle track classes that mandate two-barrel carburetors, customizing a street carburetor has been the norm for decades. Not anymore. Newly designed to meet the unique demands of circle track racing, Quick Fuel Technology’s XP-Series carb offers the performance benefits of a custom carb in an affordable, class-legal, ready-to-run package that costs less than making each required modification separately.

XP-Series carbs boast a high-flow aluminum main body that places the venturi over the throttle-body assembly. To further increase airflow, QFT put the air horn over the venturi, removed the choke tower, and precision profiled the air inlet transition. The result: improved horsepower and throttle response. Available in 500- and 600-cfm sizes, the XP-Series has set the bar for two-barrel circle track carbs.

  • Turnkey two-barrel carb ready for the circle track.
  • High-flow aluminum main body.
  • Roller bearing seals improve throttle response and reduce shaft wear.
  • Available in 500- and 600-cfm sizes.
  • Fuel type: gas.
Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor
Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Painless Performance (70920): PowerBraid Chassis Harness Kit

David Ayers Leave a comment
Use This Post Clip for Email

With a continuous temperature rating of between -94° and 257° F and a melting point of 482° F, the PowerBraid from Painless Performance is engineered to enhance and protect the insulation of any electrical wire bundles or cables. In addition, it cleans up cluttered and unsightly engine bays.

Made from tough-woven, flexible, and semi-rigid material, PowerBraid provides excellent drainage and maintains superior abrasion resistance. The split loom design has a minimum overlap of 25 percent, allowing for easy installation and optimal wiring protection. The 70920 kit includes multiple PowerBraids in various lengths and widths, plus heat shrinks, tie wraps, and rolls of electrical and stretch/seal tape.

  • Flexible, tough, semi-rigid protection for electrical wire bundles/cables.
  • Continuous temperature rating of -94° to 257° F.
  • Melting point: 482° F.
  • Split loom design with 25% overlap.
  • Includes various PowerBraids, heat shrinks, tie wraps, and tape.
  • Keeps engine compartment looking sharp.
Painless Performance (70920): PowerBraid Chassis Harness Kit
Painless Performance (70920): PowerBraid Chassis Harness Kit

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.