Category: Video

Royal Purple: HPS® Series High Performance Engine Oil

David Ayers Leave a comment
Use This Post Clip for Email

Fortified with a high level of zinc/phosphorus anti-wear additive, HPS® series motor oil from Royal Purple is designed to maximize the performance and meet the demands of high performance and modified engines. When combined with Royal Purple’s proprietary Synerlec® additive, this formulation outperforms leading synthetic and conventional lubricants in gasoline and diesel engines.

HPS® engine oil offers exceptionally high film strength to dramatically reduce engine and valve train wear and heat, all while improving the piston ring/cylinder wall seal to maximize base HP/torque and optimize fuel economy. Outstanding oxidation stability extends oil life to save you time and money. The formulation also reduces deposits to keep your engine clean and offers superior corrosion protection.

Available in a variety of sizes in the following viscosities: 5W-20, 5W-30, 10W-30, 10W-40, and 20W-50.

Note: Recommended for vehicles no longer under warranty and for those seeking greater performance and protection.

Features

  • Exceptionally high film strength to reduce engine wear and heat
  • Extends the life of your engine oil
  • Improves piston/cylinder seal to maximize horsepower, torque, and fuel economy
  • Enhanced oxidation stability extends oil life and allows for more miles driven between changes
  • Reduces engine deposits and keeps engines clean
  • Protects valve train components, including performance roller lifter and high-lift flat-tappet camshafts/lifters
  • Superior corrosion protection
Royal Purple HPS High Performance Engine Oil

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66776): 1,000 LB Digital Valve Spring Tester

David Ayers Leave a comment
Use This Post Clip for Email

For the most accurate spring-pressure checks, look no further than the new billet-aluminum, 1,000 lb, digital bench top spring tester from PROFORM. The red-anodized 66776 tester checks springs up to 1.9” diameter and 3.875” tall in 1 lb increments, with a backlit display to aid in low-light conditions. Peak hold and automotive shutoff round out the features.

Features

  • Red-anodized aluminum and backlit digital readout
  • 1,000 lb rating; reads in 1 lb increments
  • Checks springs up to 1.9” in diameter and 3 7/8” tall
  • Peak hold and auto shutoff functions
  • Sold individually
PROFORM 1000 lb Digital Valve Spring Tester 66776

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

PROFORM (66431): Universal 50-Amp Mini Alternator

David Ayers Leave a comment
Use This Post Clip for Email

If you don’t need your alternator to power a city block, the 66431 50-amp mini alternator from PROFORM packs the punch you need while adding just 6 lb to your build. This reliable, chrome-finished, one-wire alternator is 100% new, includes a machined V-belt pulley, and is tested at the component and finish levels to ensure a premium experience.

Features

  • 50-amp output
  • Universal one-wire style
  • Machined V-belt pulley
  • Not remanufactured or refurbished
  • 96 mm housing
  • Weight: 6 lb
  • Finish: chrome
PROFORM 50 Amp Mini Alternator 66431

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (010669): Vapor Lock™ Fuel Line Sleeve

David Ayers Leave a comment
Use This Post Clip for Email

The Vapor Lock™ fuel line sleeve from Design Engineering, Inc. prevents fuel and other fluids from boiling due to extreme heat and causing a vapor lock situation—along with the rough idling and difficult starting that accompany it. Made from glass fiber and polyester laminated to an aluminum outer layer, Vapor Lock™ fuel line sleeves (PN 010669) work by greatly reducing heat in the line to keep fuel cooler (340 degrees of direct heat resistance). Plus, thanks to its split design and adhesive flap, this DEI product installs easily without having to disconnect the fuel line.

Features

  • Use on fuel lines to prevent vapor lock
  • Or use on any cable, hose, or line for added heat protection
  • 5/8” (16 mm) interior diameter x 36”; easily cuts to size
  • Split design with adhesive flap
Design Engineering Inc Vapor Block Fuel Line Sleeve 010669

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Insight™: One Site, Every Tool

David Ayers Leave a comment
Use This Post Clip for Email

When it comes to accessing all your FREE Parts Pro™ benefits, there’s only one place to go: the Insight™ account system. Available at accounts.theaamgroup.com, Insight™ eliminates the need for multiple usernames and passwords. One login gives you access to marketing tools designed to help your business succeed. Highlights include:

  • Sales Flyer Builder—Build and distribute your own custom sales flyers
  • Social Power—Prewritten social media posts and blogs, posters, and social media guides that save you time and help you connect with customers
  • Vehicle Images—Download lifestyle images for use in your digital marketing
  • On the Map™—Submit your business listing to multiple manufacturers for possible inclusion in their online dealer locators
  • Rebates and Offers—Close more sales with current (and future) manufacturer promotions
  • And much more!

Once you’re logged in, you can view and access your Insight™ tools or services with just a click or a tap. Search for what you want to use or “star” frequently used tools, which conveniently moves them to the top of the page. Many tools even include instructional videos that teach you how to use them.

To get started with Insight™, visit accounts.theaamgroup.com today. If you don’t already have an account, you will be prompted to create one; it’s free to sign up! Questions? Contact your program sales team at (888) 251-4252 or sales@theaamgroup.com.

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Design Engineering, Inc. (010140): Titanium™ Turbo Shield™ Custom-Fit Turbo Blanket Kit

David Ayers Leave a comment
Use This Post Clip for Email

Able to withstand direct heat up to 1,800°F and radiant heat up to 2,500°F, Titanium™ Turbo Shield™ from Design Engineering, Inc. solves the problem of extreme underhood heat, stops heat damage of painted or carbon fiber hoods, and helps turbos spool faster. High temperature–rated silica insulation under the tight outer layer provides extra protection against extreme turbo-generated heat, making Titanium™ Turbo Shield™ stronger and more durable than similar products. DEI also engineered in a true riveted anchor and fortified seam protection to accommodate higher-horsepower levels of heat.

In addition to serving as a superior heat barrier, custom-fit Titanium™ Turbo Shield™ provides the ultimate means of reducing turbo lag. Allowing more heat in the turbine and less damaging underhood radiant heat results in a horsepower boost.

Each DEI 010140 kit includes one Turbo Shield™, one 2” x 1.5’ roll of Titanium™ exhaust wrap, two 20” stainless steel locking ties, and one 5’ roll of fastening wire. Turbo Shield™ also sold singly.

Features

  • Ultimate thermal barrier reduces turbo lag.
  • Direct heat resistance: 1,800°F
  • Radiant heat resistance: 2,500°F
  • Double-reinforced seams inside and out
  • High-tech custom carbon fiber look
  • Riveted anchors secure shield.
  • Available singly or in a kit
Design Engineering Inc TurboShield Kit 010140

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Centerforce (KDF157077): Dual Friction® Clutch and Flywheel Kit for 2020 Jeep Gladiator

David Ayers Leave a comment
Use This Post Clip for Email

Designed for the 2020 Gladiator, this Centerforce Dual Friction® clutch and flywheel kit is perfect for off-road enthusiasts who want the ultimate performance clutch for on- and off-road use. The KDF157077 set leverages the Centerforce centrifugal weight system and specialized machining processes to provide outstanding holding capacity and exceptional street characteristics—without sacrificing pedal effort. The high-inertia billet steel flywheel helps the engine maintain RPMs in rough terrain.

Features

  • For 2020 Jeep Gladiator
  • Ultimate performance clutch for on- and off-road use
  • Centrifugal weight system and specialized machining processes
  • Outstanding holding capacity and exceptional street characteristics
  • Won’t sacrifice pedal effort
  • High-inertia billet steel flywheel helps engine maintain RPMs in rough terrain
Centerforce Dual-Friction Clutch and Flywheel Kit KDF157077

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Parts Pro™: Cloyes Street Billet vs. Race Billet True® Roller Speed Sets

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Parts Pro™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we take a look at the Street and Race Billet True® Roller Speed Sets from Cloyes and talk about what sets them apart.

Parts used in this video:

Street Billet True® Roller Timing Set (9-3500TX9)

Race Billet True® Roller Timing Set (9-3600TX9Z)

Want to check out more about Cloyes?
https://partspro.com/manufacturer/cloyes

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Watch and Learn

David Ayers Leave a comment
Use This Post Clip for Email

The In the Garage™ YouTube channel is designed to help you and your employees become aftermarket accessory experts—and to send informed consumers right to your door! Our videos detail the installation of some of today’s hottest products, including key features and benefits, and capture conversations with manufacturing giants in our industry. Every video also includes a link to our Dealer Locator, so viewers can find their closest Parts Pro™ location: YOU!

Features

  • Provides an enthusiast’s perspective on product installations.
  • Connects viewers to their local aftermarket expert.
  • Encourages questions, purchases, and installations.
  • Communicates key product features, benefits, and installation techniques.

Start watching at YouTube.com/PartsProCenters

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Royal Purple: XPR® (Extreme Performance Racing) Oil

David Ayers Leave a comment
Use This Post Clip for Email

Royal Purple designed its XPR® (Extreme Performance Racing) oils for use in various racing applications such as NASCAR, NHRA, and World of Outlaws, plus motorsport events at the Bonneville Salt Flats. Contains Royal Purple’s proprietary Synerlec® additive technology. Available in a variety of sizes and grades.

Note: Please consult the Royal Purple Technical Department (atrpautotech@royalpurple.com) for assistance in choosing the racing oil for your specific application.

Features

  • Increased horsepower, greater wear protection on startup, and extended equipment life
  • Resists displacement, dilution, and emulsion caused by exotic fuels like alcohol and methanol
  • Non-foaming, with outstanding rust/corrosion protection
  • High-temperature service capability
  • No flushing required when switching from other synthetic engine oils or conventional engine oils
Royal Purple XPR Oil

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.