Tag: air intake

K&N (57-2594): 57 Series Performance Air Intake System for ’15-’17 Ford Mustang 3.7L

David Ayers Leave a comment
Use This Post Clip for Email

Street-legal in all 50 states (CARB EO D-269-65), the 57-2594 performance air intake system from K&N increases the volume of airflow to the engine of your 2015–2017 Ford Mustang 3.7L (all models). Comes with a washable, reusable K&N High-Flow Air Filter™ with oiled cotton filter media that lets you go up to 100,000 miles between filter services under normal highway driving conditions, and a custom heat shield that helps protect intake air from the high temperature of your engine bay. Typical install time is less than 90 minutes.

Features

  • 57 Series air intake system for 2015–2017 Ford Mustang 3.7L (all models)
  • Guaranteed to increase horsepower and torque through high airflow and exceptional filtration
  • Will not void vehicle warranty
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Replaces factory air filter and intake tube
  • Filter requires cleaning only every 100,000 miles under normal highway driving conditions.
  • Installation time: <90 minutes with simple hand tools
  • Warranty: 10 years/Million Mile Limited Warranty™
K&N 57 Series Performance Air Intake for Ford Mustang 57-2594

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-3090): FIPK Performance Air Intake System

David Ayers Leave a comment
Use This Post Clip for Email

Replacing your vehicle’s restrictive factory air filter and air intake housing, the 57-3090 FIPK performance air intake from K&N allows your engine to inhale a larger amount of air than ever before—and more air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a carbon-top K&N high-flow air filter and a heat shield that installs into the previous air box space. The tube accommodates the factory mass air sensor, air temperature sensor, and evaporative canister vent line, while the oversized conical air filter can be used for up to 50,000 miles before servicing (depending on driving conditions).

Note: Street legal in all 50 states.

Features

  • Simple and cost-effective horsepower upgrade.
  • Improves throttle response and engine sound.
  • Free-flowing, high-density polyethylene tube.
  • Replaces factory air filter and intake tube.
  • Carbon-top air intake and heat shield.
  • Washable and reusable air filter.
  • Street legal in all 50 states.
  • Installation time: < 90 minutes (with commonly available tools).
  • Warranty: K&N Million Mile Limited Warranty.
K&N FIPK Performance Air Intake System 57-3090

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-3081): 57 Series FIPK Air Intake

David Ayers Leave a comment
Use This Post Clip for Email

Replacing your vehicle’s restrictive factory air filter and air intake housing, the 57-3081 FIPK air intake from K&N allows your engine to inhale a larger amount of air than ever before—and more air means more usable power and acceleration throughout the engine’s RPM range. This 57 Series air intake comes with a chrome-topped K&N high-flow air filter and a heat shield that installs into the previous air box space. The tube accommodates the factory mass air sensor, air temperature sensor, and evaporative canister vent line, while the oversized conical air filter can be used for up to 50,000 miles before servicing (depending on driving conditions).

Note: Street legal in all 50 states.

Features

  • Simple and cost-effective horsepower upgrade.
  • Improves throttle response and engine sound.
  • Free-flowing, high-density polyethylene tube.
  • Replaces factory air filter and intake tube.
  • Washable and reusable air filter.
  • Street legal in all 50 states.
  • Installation time: < 90 minutes (with commonly available tools).
  • Warranty: K&N Million Mile Limited Warranty.
K&N FIPK 57 Series Air Intake System 57-3081

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N: Get a Free Mini Decorative Replica Helmet or $25 Card with Air Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good December 1–31. Click image for printable form and complete details!

 

K&N Free Mini Helmet or $25 Card on Air Intakes

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N: Get a Free Hat or $25 Card with Air Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good December 1–31. Click image for printable form and complete details!

 

K&N Free Hat or $25 Card on Air Intakes

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: Get a $25 Card or a Free Hat with Air Intake System Purchase

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good November 1–30. Click image for printable form and complete details!

 

AIRAID $25 Card on Air Intake Systems

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-1570): Air Intake System for ’14-’15 Jeep Grand Cherokee 3.0L V6 EcoDiesel

David Ayers Leave a comment
Use This Post Clip for Email

The 3.0L V6 turbo engine in 2014–2015 Jeep Grand Cherokees provides a modest amount of power but is paired with a stock air intake system that may cause unnecessary air turbulence and slow the volume of airflow reaching the engine.

K&N has your answer. The 57-1570 air intake system is engineered to replace the factory air filter and air intake housing. Its free-flowing, roto-molded, high-density polyethylene tube is meticulously designed to be aerodynamic—and when paired with the included oversized conical air filter can increase airflow to your engine by up to 50% (the filter is washable and reusable to boot). You’ll enjoy up to 100,000 miles between cleanings under normal highway driving conditions.

K&N’s 57-1570 system also offers a black powder-coated aluminum heat shield, protecting the air filter and intake air from hot engine bays. The air intake tube funnels airflow directly into the engine’s throttle body for a guaranteed increase in horsepower and torque; in fact, dyno testing of a 2014 Grand Cherokee saw an increase of 12.67 horsepower and 30.94 ft.-lb. of torque.

Features

  • Guaranteed to increase horsepower.
  • Designed to improve throttle response and engine sound.
  • Lasts up to 100,000 miles before service is required (depending on driving conditions).
  • Replaces entire factory air intake system.
  • Free-flowing, high-density polyethylene tube.
  • Washable and reusable lifetime air filter.
  • Installation: < 90 minutes.
  • Warranty: K&N Million Mile Limited.

K&N Air Intake System for 14-15 Jeep Grand Cherokee 57-1570

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (69-2553TTK): Typhoon Air Intake for Dodge Challenger/Charger SRT Hellcat

David Ayers Leave a comment
Use This Post Clip for Email

The K&N Typhoon air intake system is a complete air induction system replacement for some Dodge Challenger/Charger SRT Hellcat models. The Typhoon dramatically reduces air flow restriction for more usable power and acceleration throughout the RPM range, while the oversized conical filter can be used for up to 100,000 miles before servicing (depending on driving conditions).

The 69-2553TTK intake comes with a chrome-topped K&N high-flow air filter, mandrel-bent aluminum tube, and heat shield. The black powder-coated tube accommodates the factory intake air temperature sensor and crank case vent hose.

Note: Check your vehicle application for specific CARB status.

Features

  • Guaranteed to increase horsepower.
  • Improves throttle response and engine sound.
  • Free-flowing aluminum tube.
  • Filter lasts up to 100,000 miles before service is required.
  • Replaces entire factory air intake system.
  • Washable, reusable lifetime air filter.
  • Warranty: K&N Million Mile Limited.

K&N Typhoon Air Intake for Dodge Challenger or Charger

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N Orion Universal Air Intake System 54-5000

K&N (54-5000): Orion Universal Air Intake System

David Ayers Leave a comment
Use This Post Clip for Email

The universal Orion air intake system from K&N is engineered to increase volumetric efficiency and engine horsepower. The Orion uses K&N’s famous removable cotton gauze air filter and offers the benefits of an open-cone filter and standard air box in one unit. In addition, the plastic injection-molded housing acts as a heat shield to prevent power loss. Assembly designs were flow tested for many hours to achieve Orion’s final shape.

K&N 54-5000 includes a template to cut your own vinyl wrap to customize the housing, a 76mm air filter base flange, and a 100mm housing intake. The filter base has a 1/4” NPT threaded fitting to accommodate an optional vent adapter.

Available separately: mounting hardware, vent adapters, and cold air hose.

Features

  • High filtered air flow increases HP and acceleration.
  • Injection-molded filter housing.
  • Washable and reusable lifetime air filter with molded velocity stack.
  • Flow-tested assembly for optimized air flow and reduced pressure loss.
  • Warranty: Million Mile Limited

K&N Orion Universal Air Intake System 54-5000

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (100-025): You-Build-It Air Intake Tube

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking to build an air intake system for your custom project, the 100-025 UBI (you-build-it) air intake set from AIRAID should be your first stop. Including a variety of bends and straight pipes, the 2.5” diameter, one-piece, roto-molded tube can be cut to lengths or bends to suit your project needs. You’ll find 30-, 45-, 60-, and 90-degree bends: just measure off the size you need and cut off the segment.

Features

  • Perfect for custom projects.
  • Variety of bends and straight sections.
  • Includes 30°, 45°, 60°, and 90°

AIRAID 100-025 UBI Intake Tube

Ready to buy? Need help with the install? To find your nearest Parts Pro affiliate, see our Store Locator. Or join the conversation at the Parts Pro Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.